Mark For: ADAM® trademark registration is intended to cover the categories of electronic and mechanical measuring, control and regulating apparatus for control and regulation of welding processes in welding machines, namely, sensors, data processing equipment, and control instruments; hardcoded software for electronic and mechanical measuring, control, monitoring and regulating of welding processes in welding machines. [all]
Status
2022-02-04 UTC
LIVE REGISTRATION Issued and Active
The trademark application has been registered with the Office.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Art Hasan
Attorney Docket Number
130479
Law Office Assigned
N60
Employee Name
BHUPATHI, TARA LUISE
Timeline
2009-02-02
Date of First Use
2009-05-25
Date of Use In Commerce
2016-11-23
Application Filed
2018-03-27
Published
2018-03-27
Published for Opposition
2018-06-12
Location: PUBLICATION AND ISSUE SECTION
2018-06-12
Status: Live/Registered
2018-06-12
Status: Registered. The registration date is used to determine when post-registration maintenance documents are due.
ART HASAN LEWIS ROCA ROTHGERBER CHRISTIE LLP P.O. BOX 29001 GLENDALE, CA 91209-9001
Good, Services, and Codes
IC 009. US 021 023 026 036 038. G & S: ELECTRON IC AND MECHANICAL MEASURING, CONTROL AND REGULATING APPARATUS FOR CONTROL AND REGULATION OF WELDING PROCESSES IN WELDING MACHINES, NAMELY, SENSORS, DATA PROCESSING EQUIPMENT, AND CONTROL INSTRUMENTS; HARDCODED SOFTWARE FOR ELECTRON IC AND MECHANICAL MEASURING, CONTROL, MONITORING AND REGULATING OF WELDING PROCESSES IN WELDING MACHINES. FIRST USE: 20090202. FIRST USE IN COMMERCE: 20090525
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
GS0091
ELECTRONIC AND MECHANICAL MEASURING, CONTROL AND REGULATING APPARATUS FOR CONTROL AND REGULATION OF WELDING PROCESSES IN WELDING MACHINES, NAMELY, SENSORS, DATA PROCESSING EQUIPMENT, AND CONTROL INSTRUMENTS; HARDCODED SOFTWARE FOR ELECTRONIC AND MECHANICAL MEASURING, CONTROL, MONITORING AND REGULATING OF WELDING PROCESSES IN WELDING MACHINES
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.