To: | AMADA MIYACHI AMERICA, INC. (PTO@LRRC.COM) |
Subject: | U.S. TRADEMARK APPLICATION NO. 87246942 - ADAM - 130479 |
Sent: | 1/19/2017 8:22:11 AM |
Sent As: | ECOM102@USPTO.GOV |
Attachments: | Attachment - 1 |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 87246942
MARK: ADAM
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: AMADA MIYACHI AMERICA, INC.
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW. A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.
ISSUE/MAILING DATE: 1/19/2017
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SUMMARY OF ISSUES to which applicant must respond:
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Applicant’s mark is ADAM for goods currently identified as “electronic and mechanical measuring, control and regulating apparatus including hardcoded software, sensors, data processing equipment, and control instruments for control and regulation of welding machines and control and regulation of welding processes” in International Class 9.
Registrant’s mark is ADAM (Reg. No. 2097123) for “computer hardware and software for data acquisition, industrial process control and signal conditioning applications for manufacturing, laboratory and industrial environment” in International Class 9.
Trademark Act Section 2(d) bars registration of an applied-for mark that so resembles a registered mark that it is likely a potential consumer would be confused, mistaken, or deceived as to the source of the goods and/or services of the applicant and registrant. See 15 U.S.C. §1052(d). A determination of likelihood of confusion under Section 2(d) is made on a case-by-case basis and the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) aid in this determination. Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d 1344, 1349, 98 USPQ2d 1253, 1256 (Fed. Cir. 2011) (citing On-Line Careline, Inc. v. Am. Online, Inc., 229 F.3d 1080, 1085, 56 USPQ2d 1471, 1474 (Fed. Cir. 2000)). Not all the du Pont factors, however, are necessarily relevant or of equal weight, and any one of the factors may control in a given case, depending upon the evidence of record. Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d at 1355, 98 USPQ2d at 1260; In re Majestic Distilling Co., 315 F.3d 1311, 1315, 65 USPQ2d 1201, 1204 (Fed. Cir. 2003); see In re E. I. du Pont de Nemours & Co., 476 F.2d at 1361-62, 177 USPQ at 567.
In this case, the following factors are the most relevant: similarity of the marks, similarity and nature of the goods and/or services, and similarity of the trade channels of the goods and/or services. See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.
Comparison of Marks:
In the present case, applicant’s mark is ADAM and registrant’s mark is ADAM. These marks are identical in appearance, sound, and meaning, “and have the potential to be used . . . in exactly the same manner.” In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015). Additionally, because they are identical, these marks are likely to engender the same connotation and overall commercial impression when considered in connection with applicant’s and registrant’s respective goods. In re i.am.symbolic, llc, 116 USPQ2d at 1411.
Therefore, the marks are confusingly similar.
Relatedness of Goods:
Applicant’s electronic and mechanical measuring, control and regulating apparatus including hardcoded software, sensors, data processing equipment, and control instruments for control and regulation of welding machines and control and regulation of welding processes are closely related to registrant’s hardware and software for industrial process control for the industrial environment because applicant’s goods are encompassed in registrant’s goods. Specifically, measuring, control and regulating hardware and software for welding machines and processes are types of industrial process control hardware and software for the industrial environment.
Absent restrictions in an application and/or registration, the identified goods are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Additionally, unrestricted and broad identifications are presumed to encompass all goods of the type described. See In re Jump Designs, LLC, 80 USPQ2d 1370, 1374 (TTAB 2006) (citing In re Elbaum, 211 USPQ 639, 640 (TTAB 1981)); In re Linkvest S.A., 24 USPQ2d 1716, 1716 (TTAB 1992).
In this case, the identifications set forth in the application and registration have no restrictions as to nature, type, channels of trade, or classes of purchasers. Therefore, it is presumed that these goods travel in all normal channels of trade, and are available to the same class of purchasers. Further, the registration uses broad wording to describe the goods and this wording is presumed to encompass all goods of the type described, including those in applicant’s more narrow identification.
Therefore, the goods are considered related for Section 2(d) analysis purposes.
Given the foregoing, registration is refused under Section 2(d) of the Trademark Act.
SPECIMEN UNACCEPTABLE
A mock-up of a product or its packaging that has been digitally created or otherwise altered to include the mark does not show actual use of the mark in commerce. See 15 U.S.C. §1127; TMEP §§904.04(a), 904.07(a); cf. In re Chica, Inc., 84 USPQ2d 1845, 1848 (TTAB 2007) (holding that “a mere drawing of the goods with an illustration of how the mark may be displayed” was not an acceptable specimen because it did not show actual use in commerce); In re The Signal Cos., 228 USPQ 956, 957-58 n.4 (TTAB 1986) (noting that a printer’s proof of an advertisement would not be an acceptable specimen because it does not show actual use in commerce).
An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods identified in the application or amendment to allege use. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). “Use in commerce” means (1) a bona fide use of the applied-for mark in the ordinary course of trade (and not merely to reserve a right in the mark), (2) the mark is placed in any manner on the goods, packaging, tags or labels, or displays of the goods at their point of sale, and (3) the goods are actually sold or transported in commerce. See 15 U.S.C. §1127.
In addition to the examples of specimens in (2) in the above paragraph, examples of specimens for goods also include instruction manuals, containers, and webpages that include a picture or textual description of the goods associated with the mark and the means to order the goods. See TMEP §§904.03 et seq.
Applicant may respond to this refusal by satisfying one of the following for each applicable international class:
(1) Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the goods and/or services identified in the application or amendment to allege use. A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20: “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.” The substitute specimen cannot be accepted without this statement.
(2) Amend the filing basis to intent to use under Section 1(b), for which no specimen is required. This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.
For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/specimen.jsp.
INFORMATION ABOUT SPECIMEN REQUIRED
A specimen must show the mark as used in commerce, which means use in the ordinary course of trade (not merely to reserve a right in the mark). 15 U.S.C. §§1051, 1052, 1127. A specimen shows a mark used in commerce for goods only if it shows the mark placed on the goods, packaging, tags or labels affixed to the goods, or displays of the goods at their point of sale, and the goods are actually sold or transported for sale in commerce. 15 U.S.C. §1127. Because the specimen of record appears to be digitally created or altered, or otherwise a mock-up, it does not appear to show the mark as actually used in commerce. Therefore, to permit proper examination of the application, applicant must submit additional information for the record about the specimen and how the mark as shown in the specimen is in use in commerce with applicant’s goods. See 37 C.F.R. §2.61(b); TMEP §814.
Accordingly, applicant must respond to the following questions and requests for documentation to satisfy this request for information:
(1) How are applicant’s goods sold? Specify the retail, wholesale, or other sales environment in which the goods are sold.
(2) Please provide copies of invoices, bills of sale, or other documentation of sales of the goods.
(3) Was the specimen created for submission with this application?
(4) Does the specimen show applicant’s product as it is currently being sold to consumers?
(5) How do applicant’s goods appear in the actual sales environment? If sold in stores, provide photos showing the goods for sale in the stores. If sold online, identify the websites and provide copies of the webpages showing the goods for sale. And if sold in another type of sales environment, provide photos and/or documentation showing the goods for sale in that environment.
(6) If the information in question (5) about how the goods appear in the actual sales environment is not available to applicant, then please describe how applicant’s goods are transported for sale and provide photos and other documentation showing how applicant’s mark appears on the goods and/or its packaging when the goods are being transported for sale.
See 37 C.F.R. §2.61(b); TMEP §814.
Failure to comply with a request for information is grounds for refusing registration. In re AOP LLC, 107 USPQ2d 1644, 1651 (TTAB 2013) (citing In re Cheezwhse.com, Inc., 85 USPQ2d 1917, 1919 (TTAB 2008); In re DTI P’ship LLP, 67 USPQ2d 1699, 1701-02 (TTAB 2003); TMEP §814). Merely stating that information is available on applicant’s website is an insufficient response and will not make the relevant information of record. See In re Planalytics, Inc., 70 USPQ2d 1453, 1457-58 (TTAB 2004).
IDENTIFICATION OF GOODS
The wording “electronic and mechanical measuring, control and regulating apparatus including hardcoded software, sensors, data processing equipment, and control instruments for control and regulation of welding machines and control and regulation of welding processes” is unacceptable as indefinite because applicant must specify the function of the software and applicant must clearly state that the purpose of the apparatus is control and regulation of welding machines and welding processes.
Applicant may adopt any or all of the following suggested amendment to the identification of goods:
- International Class
9: electronic and mechanical measuring, control and regulating apparatus for control and regulation of welding machines and control and regulation of welding processes, namely, including hardcoded
software, sensors, data processing equipment, and control instruments for control and regulation of welding machines and control and regulation of welding
processes; hardcoded software for electronic and mechanical measuring, control and regulating of welding machines and welding processes
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
RESPONSE GUIDELINES
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
/Tara L. Bhupathi/
Examining Attorney
Law Office 102
571-272-5557
tara.bhupathi@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.