To: | Surface-Tech LLC (alison@slindenelson.com) |
Subject: | U.S. Trademark Application Serial No. 90022722 - ACE - N/A |
Sent: | September 22, 2020 10:03:53 AM |
Sent As: | ecom121@uspto.gov |
Attachments: |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 90022722
Mark: ACE
|
|
Correspondence Address:
|
|
Applicant: Surface-Tech LLC
|
|
Reference/Docket No. N/A
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: September 22, 2020
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SEARCH OF USPTO DATABASE OF MARKS
· Amendment of Identification of Goods Required
· Multiple-Class Application Requirements
· Response Guidelines
MARK ON DRAWING DIFFERS FROM MARK ON SPECIMEN
Mark shown on drawing does not match mark on specimen. Registration is refused because the specimen does not show the mark in the drawing in use in commerce in International Class 019, which is required in the application or amendment to allege use. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a), 1301.04(g)(i). The mark appearing on the specimen and in the drawing must match; that is, the mark in the drawing “must be a substantially exact representation of the mark” on the specimen. See 37 C.F.R. §2.51(a)-(b); TMEP §807.12(a).
In this case, the specimen displays the mark as ACE XP Polymer Fiber. However, the drawing displays the mark as ACE. The mark on the specimen does not match the mark in the drawing because in that the drawing lacks the wording “XP Polymer Fiber.” Applicant has thus failed to provide the required evidence of use of the mark in commerce. See TMEP §807.12(a).
Response options. Applicant may respond to this refusal by satisfying one of the following:
(1) Submit a different specimen (a verified “substitute” specimen) for each applicable international class that (a) shows the mark in the drawing in actual use in commerce for the goods and/or services in the application or amendment to allege use, and (b) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use.
Examples of specimens. Specimens for goods include a photograph of (1) the actual goods bearing the mark; (2) an actual container, packaging, tag or label for the goods bearing the mark; or (3) a point-of-sale display showing the mark directly associated with the goods. See 37 C.F.R. §2.56(b)(1), (c); TMEP §904.03(a)-(m). A webpage specimen submitted as a display associated with the goods must show the mark in association with a picture or textual description of the goods and include information necessary for ordering the goods. TMEP §904.03(i); see 37 C.F.R. §2.56(b)(1), (c).
Specimens for services must show a direct association between the mark and the services and include: (1) copies of advertising and marketing material, (2) a photograph of business signage or billboards, or (3) materials showing the mark in the sale, rendering, or advertising of the services. See 37 C.F.R. §2.56(b)(1), (c); TMEP §1301.04(a), (h)(iv)(C).
Any web page printout or screenshot submitted as a specimen, whether for goods or services, must include the webpage’s URL and the date it was accessed or printed. 37 C.F.R. §2.56(c).
(2) Submit a request to amend the filing basis to intent to use under Section 1(b) (which includes withdrawing an amendment to allege use, if one was filed), as no specimen is required before publication. This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.
The USPTO will not accept an amended drawing submitted in response to this refusal because the changes would materially alter the drawing of the mark in the original application or as previously acceptably amended. See 37 C.F.R. §2.72(a)-(b); TMEP §807.14. Specifically, the wording “XP” appears to be suggestive wording that changes the commercial impression of the mark and would require a new likelihood of confusion search.
For more information about drawings and instructions on how to satisfy these response options using the online Trademark Electronic Application System (TEAS) form, see the Drawing webpage.
AMENDMENT OF IDENTIFICATION OF GOODS REQUIRED
The wording “Polymer fibers combined with wax and used to strengthen and reinforce materials” in the identification of goods for International Class 019 must be clarified because it is too broad and could include goods in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. In particular, this wording could encompass the below recommendations.
Applicant may substitute the following wording, if accurate:
Class 019: Non-woven polymer fibers combined with wax and used to strengthen and reinforce building materials
Class 022: Woven polymer fibers combined with wax and used to strengthen and reinforce materials for textile use
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
MULTIPLE-CLASS APPLICATION REQUIREMENTS
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).
(2) Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule). Specifically, the application identifies goods and/or services based on use in commerce that are classified in at least TWO classes; however, applicant submitted a fee(s) sufficient for only ONE class(es). Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.
(3) Submit verified dates of first use of the mark anywhere and in commerce for each international class. See more information about verified dates of use.
(4) Submit a specimen for each international class. The current specimen is not acceptable for any international class. See more information about specimens.
Examples of specimens. Specimens for goods include a photograph of (1) the actual goods bearing the mark; (2) an actual container, packaging, tag or label for the goods bearing the mark; or (3) a point-of-sale display showing the mark directly associated with the goods. See 37 C.F.R. §2.56(b)(1), (c); TMEP §904.03(a)-(m). A webpage specimen submitted as a display associated with the goods must show the mark in association with a picture or textual description of the goods and include information necessary for ordering the goods. TMEP §904.03(i); see 37 C.F.R. §2.56(b)(1), (c).
Specimens for services must show a direct association between the mark and the services and include: (1) copies of advertising and marketing material, (2) a photograph of business signage or billboards, or (3) materials showing the mark in the sale, rendering, or advertising of the services. See 37 C.F.R. §2.56(b)(2), (c); TMEP §1301.04(a), (h)(iv)(C).
Any webpage printout or screenshot submitted as a specimen, whether for goods or services, must include the webpage’s URL and the date it was accessed or printed. 37 C.F.R. §2.56(c).
(5) Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application.” See more information about verification.
See 37 C.F.R. §2.86(a); TMEP §§1403.01, 1403.02(c).
For an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form, see the Multiple-class Application webpage.
For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action. For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above. For a requirement, applicant should set forth the changes or statements. Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.
How to respond. Click to file a response to this nonfinal Office action.
/Christopher Renneker/
Examining Attorney
Law Office 121
571-272-8045
christopher.renneker@uspto.gov
RESPONSE GUIDANCE