The mark consists of a three sided shape with a slightly arced top connecting two equal sides which meet at a point at the bottom having two parallel stripes placed at a diagonal running across the center of the shape from left to right with the left side higher than the right side, and one partial stripe to the right above the first center stripe with the shape being to the left of the word SHIELD in upper case letters with the height of the shape and the height of the letters being equal.
Mark For: SHIELD™ trademark registration is intended to cover the category of athletic tape. [all]
>Color is not claimed as a feature of the mark. The mark consists of a three sided shape with a slightly arced top connecting two equal sides which meet at a point at the bottom having two parallel stripes placed at a diagonal running across the center of the shape from left to right with the left side higher than the right side, and one partial stripe to the right above the first center stripe with the shape being to the left of the word SHIELD in upper case letters with the height of the shape and the height of the letters being equal.
Status
2023-09-19 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
DEBORAH A. BASILE DOHERTY WALLACE PILLSBURY MURPHY ONE MONARCH PLACE SUITE 1900 SPRINGFIELD, MA 01144
Good, Services, and Codes
IC 010. US 026 039 044. G & S: Athletic tape. FIRST USE: 20221221. FIRST USE IN COMMERCE: 20221221
International Codes:
10
U.S. Codes:
026,039,044
Type Code
Type
DM0000
The mark consists of a three sided shape with a slightly arced top connecting two equal sides which meet at a point at the bottom having two parallel stripes placed at a diagonal running across the center of the shape from left to right with the left side higher than the right side, and one partial stripe to the right above the first center stripe with the shape being to the left of the word SHIELD in upper case letters with the height of the shape and the height of the letters being equal.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.