The mark consists of an octagon shape with a cutout on the right side of the octagon with three horizontal lines in the middle of the cutout which is to the left of a vertical line with "ECE" stacked on top of the word "SYSTEMS".
Mark For: ECE SYSTEMS™ trademark registration is intended to cover the categories of milling and recycling service equipment, namely, milling and recycling equipment for processing, compacting, reducing, sorting and removing moisture from composite materials and for breaking composite materials into component pieces; parts and accessories for Milling and recycling service equipment, namely, vibratory screeners, magnets, hoppers, balers, conveyors, pneumatics and air handling, optical sorting, controls and structural platforms, rails, and the like.
Status
2022-09-06 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Dianne M. Smith-Misemer
Attorney Docket Number
57686/6452
Timeline
2022-09-02
Application Filed
2022-09-06
Location: NEW APPLICATION PROCESSING
2022-09-06
Status: Live/Pending
2022-09-06
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
DIANNE M. SMITH-MISEMER HOVEY WILLIAMS LLP 10801 MASTIN BOULEVARD, SUITE 1000 OVERLAND PARK, KS 66210
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
International Codes:
40
U.S. Codes:
100,103,106
International Codes:
42
U.S. Codes:
100,101
Type Code
Type
GS0401
Manufacturing and finishing services for others, namely, manufacturing and finishing of automated production systems and machinery for manufacturing; Milling and recycling equipment services
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.