The mark consists of the letters DST in black with two blue triangular designs diagonally to the left of DST, the top one pointing to the left and the lower diagonal design pointing to the right.
Mark For: DST™ trademark registration is intended to cover the categories of machine tools; Components for machine tools; Milling heads; Milling machines; Milling machines; rotating milling machines as machine parts and machines; Milling tools parts of machines.
Status
2022-05-21 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
ROBERT S. BRODER
Attorney Docket Number
037300
Timeline
2021-12-20
Trademark Registered
2022-05-18
Application Filed
2022-05-21
Location: NEW APPLICATION PROCESSING
2022-05-21
Status: Live/Pending
2022-05-21
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
ROBERT S. BRODER 1077 NORTHERN BLVD. ROSLYN, NY 11576
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
International Codes:
8
U.S. Codes:
023,028,044
International Codes:
9
U.S. Codes:
021,023,026,036,038
International Codes:
37
U.S. Codes:
100,103,106
International Codes:
42
U.S. Codes:
100,101
Type Code
Type
DM0000
The mark consists of the letters DST in black with two blue triangular designs diagonally to the left of DST, the top one pointing to the left and the lower diagonal design pointing to the right.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Cincinnati Machine Tools Corporation
Application
| 