Mark For: TRIVEX™ trademark registration is intended to cover the categories of plastic in bars, blocks, pellets, rods, sheets and tubes in further manufacture for general industrial use; Plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of pellets for use in manufacturing.
Status
2022-04-22 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Timeline
2016-01-01
Date of First Use
2016-02-12
Date of Use In Commerce
2022-04-19
Application Filed
2022-04-22
Location: NEW APPLICATION PROCESSING
2022-04-22
Status: Live/Pending
2022-04-22
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
TRIVALENCE TECHNOLOGIES 3001 MAXX RD EVANSVILLLE, IN 47711
Good, Services, and Codes
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
Plastic in bars, blocks, pellets, rods, sheets and tubes in further manufacture for general industrial use; Plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of pellets for use in manufacturing
GS0171
Plastic in bars, blocks, pellets, rods, sheets and tubes in further manufacture for general industrial use; Plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing; Extruded plastic in the form of pellets for use in manufacturing
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.