The mark consists of a graphic design of an open hand, with an oversized number "5" tilted upward at an angle to form the thumb and palm of the open hand, with the remaining four fingers shown as different hand tools, including a ruler, a wrench, a drill-bit and a fountain pen nib.
Mark For: 5™ trademark registration is intended to cover the categories of metal clamps used for holding piece parts on machine tool tables; Chucks for machine tools; Drill chucks for power drills; Chucks for power drills; and Machine parts, namely, joints and joint parts for bits and drills.
Status
2022-04-12 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
Alan D. Kamrath
Attorney Name
Alan D. Kamrath
Attorney Docket Number
FT11103020US
Timeline
2022-04-08
Application Filed
2022-04-12
Location: NEW APPLICATION PROCESSING
2022-04-12
Status: Live/Pending
2022-04-12
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
ALAN D. KAMRATH MAYER & WILLIAMS PC 55 MADISON AVENUE, SUITE 400 MORRISTOWN, NJ 07960
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
Type Code
Type
DM0000
The mark consists of a graphic design of an open hand, with an oversized number "5" tilted upward at an angle to form the thumb and palm of the open hand, with the remaining four fingers shown as different hand tools, including a ruler, a wrench, a drill-bit and a fountain pen nib.
DM0000
The mark consists of a graphic design of an open hand, with an oversized number "5" tilted upward at an angle to form the thumb and palm of the open hand, with the remaining four fingers shown as different hand tools, including a ruler, a wrench, a drill-bit and a fountain pen nib.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Kokuhin Metal Co., Ltd.
| 