Mark For: FMP™ trademark registration is intended to cover the categories of drilling systems and vibration drilling systems, also for geothermal purposes; pumps and agitators for drilling purposes; agricultural, earthmoving, construction, oil and gas extraction and mining machinery; parts for the aforementioned products, including rotors, stators, drill rods and drill bits.
Status
2022-01-30 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
Scott D. Woldow
Attorney Name
Scott D. Woldow
Attorney Docket Number
034970.004
Timeline
2021-10-30
Trademark Registered
2022-01-26
Application Filed
2022-01-29
Location: NEW APPLICATION PROCESSING
2022-01-29
Status: Live/Pending
2022-01-29
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
SCOTT D. WOLDOW SMITH, GAMBRELL & RUSSELL, LLP 1055 THOMAS JEFFERSON ST, NW SUITE 400 WASHINGTON, DC 20007
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
Type Code
Type
GS0071
drilling systems and vibration drilling systems, also for geothermal purposes; pumps and agitators for drilling purposes; agricultural, earthmoving, construction, oil and gas extraction and mining machinery; parts for the aforementioned products, including rotors, stators, drill rods and drill bits
GS0071
drilling machines, drilling rigs, and vibration drilling machines, and vibration drilling rigs, also for geothermal purposes; pumps and agitators for drilling purposes; agricultural, earthmoving, construction, oil and gas extraction and mining machinery, namely, drilling machines, tubing machines, and electrochemical profiling machines; parts for the aforementioned products, including rotors, stators, drill rods and drill bits
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.