Trademark/Service Mark Application, Principal Register
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
The mark consists of standard characters, without claim to any particular font style, size, or color.
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
ICP Construction, Inc.
*MAILING ADDRESS
150 Dascomb Road
*CITY
Andover
*STATE
(Required for U.S. applicants)
Massachusetts
*COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
01810
*EMAIL ADDRESS
XXXX
LEGAL ENTITY INFORMATION
TYPE
corporation
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY OF INCORPORATION
Massachusetts
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
002
*IDENTIFICATION
Paints; primers; Coatings in the nature of stains for exterior use on a variety of substrates; sealer coatings; colorants and tints for paints
and primers; resin sold as an integral component of paints and primers; concrete sealers in the form of a coating; penetrating sealer coatings for use on decks; penetrating sealer coatings for use on
concrete; protective coatings for exterior and interior use on wood and concrete substrates; preservative coatings for concrete and wood surfaces; epoxy coating for wood, metal or masonry; acrylic
latex filler coating for rubber underlayments; surface coatings for athletic surfaces; acrylic polymer surface coatings for use on asphalt and concrete roller hockey facilities; acrylic coatings and
surfacing materials for asphalt, concrete, athletic surfaces such as tennis courts, recreational areas, and other pavements; polymer surface coating composition for multisport gymnasium floors;
acrylic color coating filler for asphalt and concrete; liquid coatings in the nature of a paint, namely, liquid enamels, fillers, paints, primers, sealers, shellac, stains and varnishes; liquid
thinners for paints and varnishes; resinous liquid floor and wall coatings; liquid coatings for the protection of roofing; heavy paintlike coatings for concrete blocks; liquid tinting colors for
enamels, fillers, paints, primers, and concrete block coatings; finishing material for asphalt, namely, penetrating sealer coatings, concrete coatings being penetrating sealer coatings, plaster and
masonry coatings being penetrating sealer coatings; cement bonding compounds being unprocessed natural resins for use in the manufacture of adhesives; and masonry water-repelling compounds being
penetrating sealer coatings; surface coating compositions, namely, non-skid compositions for floors and the like all being penetrating sealer coatings with a high friction finish; reflective acrylic
paint for paved surfaces; paints, varnishes and preservatives against rust and against deterioration of wood; surface coatings for interior and exterior use to protect against and treat growth of
mold, mildew, bacteria and fungi; primers for preparing surfaces to be painted and finishes, both containing antimicrobial products to prevent the growth of mold, mildew and similar organisms on the
structural components of buildings and on walls, floors and countertop surfaces, and on personal sports equipment and sports surfaces, namely, tennis courts, tracks and turf; acrylic coatings being
penetrating sealer coatings for use in a system to remediate contamination from mold, mildew and similar organisms that accumulate on the structural components of buildings; rubber coatings and
surfacing materials for tennis courts, recreational areas and other pavements being penetrating sealer coatings; all-surface paving compound being penetrating sealer coatings; elastomeric coating
compositions for asphalt, concrete and wood all being penetrating sealer coatings; paints, architectural coatings, sealers, and binders, all being penetrating sealer coatings; decorative coating
material containing pigments, mineral fillers and fibers for covering paved surfaces; Antimicrobial cleaning agents, namely, disinfectant soaps, for use in controlling, remediating and preventing the
growth of mold, mildew and similar organisms on the structural components of buildings on walls, floors and countertop surfaces, for cleaning and disinfecting personal sports equipment, and on sports
surfaces, namely, tennis courts, tracks and turf, for use in commercial and residential applications; antimicrobial preparations for inhibiting and treating mold and mildew; antimicrobial acrylic
coatings to prevent the growth of mold, mildew and similar organisms on the structural components of buildings, on walls, floors and countertop surfaces, for cleaning and disinfecting personal sports
equipment, and on sports surfaces, namely, tennis courts, tracks and turf; antimicrobial cleaning agents, namely, sanitary sterilizing preparations, fungicides, disinfectants, sanitizers,
antiseptics, and germicides, for use in controlling, remediating and preventing growth of mold, mildew and similar organisms on the structural components of buildings, on walls, floors and countertop
surfaces, for cleaning and disinfecting personal sports equipment, and on sports surfaces, namely, tennis courts, tracks and turf, for use in commercial and residential applications; Asphalt coatings
and surfacing materials for athletic surfaces, namely, asphalt coatings and surfacing materials for tennis courts, recreational areas and other pavements, all the forgoing being asphalt; Polyurethane
foam adhesive for use with roofing in the building industry; polyurethane adhesives for industrial use; adhesives for general use, namely, adhesives for use in construction, aerosol foam adhesives
for use in connection with residential and commercial construction projects; chemical spray solvent cleaner used to dissolve uncured foam; Polyurethane adhesive application systems consisting of
power-operated polyurethane adhesive dispensing machines and parts therefor and polyurethane adhesive chemicals, sold as a unit, for use in building and construction industries; Power-operated
hand-held dispenser attached to containers for use in dispensing a foam spray; power-operated spray guns for foamable synthetics; push carts specially designed for transporting cylinders for
machines; Polyurethane sealants; sealants for buildings; Polyurethane spray foam for sealing mine shafts; polyurethane spray foams for use as insulation in exterior home walls, cement blocks, window
fenestration, marine insulation, and extruded profile channel fill; polyurethane foam kit comprised of polyurethane spray foam and foam feed tanks and refills thereof, plastic tubing, polyurethane
foam dispensers all for use in insulation, sealing, packaging, filling and marine flotation applications; aerosol foam sealant for use in connection with residential and commercial construction
projects; polyurethane spray foam with heated hoses, sold as a unit, for residential and commercial insulation purposes; foam products for door and window insulation, namely, polyurethane insulation
systems, namely, polyurethane foams for use as building insulation, polyurethane foam sealants for filling in gaps and cracks, and low pressure polyurethane spray foam sealants sold as a unit;
Plastic spray nozzles and tips for hand-operated pressurized dispensers of foam insulation that incorporate a temperature sensor that causes the nozzles and tips to change color as a temperature
warning to indicate whether the chemicals comprising the insulation are at the proper temperature for installation; color changing temperature warning plastic nozzles and tips for hand-operated
pressurized dispensers of foam insulation that indicate by changing color whether the chemicals comprising the insulation are at the proper temperature for installation; plastic nozzles and tips for
hand-operated pressurized dispensers of foam insulation
FILING BASIS
SECTION 1(b)
ATTORNEY INFORMATION
NAME
John Pickerill
ATTORNEY BAR MEMBERSHIP NUMBER
XXX
YEAR OF ADMISSION
XXXX
U.S. STATE/ COMMONWEALTH/ TERRITORY
XX
FIRM NAME
Fredrikson & Byron, P.A.
STREET
200 South 6th Street, Suite 4000
CITY
Minneapolis
STATE
Minnesota
COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
ZIP/POSTAL CODE
55402
PHONE
612-492-7306
FAX
6124927077
EMAIL ADDRESS
ip@fredlaw.com
OTHER APPOINTED ATTORNEY
Cindy Moyer; Courtney Thompson; Tracy Deutmeyer; Jake Abdo; Ann Wessberg
CORRESPONDENCE INFORMATION
NAME
John Pickerill
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE
ip@fredlaw.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES)
wmunt@fredlaw.com
FEE INFORMATION
APPLICATION FILING OPTION
TEAS Standard
NUMBER OF CLASSES
1
APPLICATION FOR REGISTRATION PER CLASS
350
*TOTAL FEES DUE
350
*TOTAL FEES PAID
350
SIGNATURE INFORMATION
SIGNATURE
/John Pickerill/
SIGNATORY'S NAME
John Pickerill
SIGNATORY'S POSITION
Attorney of record
SIGNATORY'S PHONE NUMBER
612-492-7306
DATE SIGNED
01/13/2022
SIGNATURE METHOD
Signed directly within the form
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
Serial Number:97218272
Filing Date:01/13/2022
To the Commissioner for Trademarks:
MARK: ICP (Standard Characters, see mark)
The literal element of the mark consists of ICP. The mark consists of standard characters, without claim to any particular font style, size, or color.
The applicant, ICP Construction, Inc., a corporation of Massachusetts, having an address of
150 Dascomb Road
Andover, Massachusetts 01810
United States
XXXX
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 002: Paints; primers; Coatings in the nature of stains for exterior use on a variety of substrates; sealer coatings; colorants and tints for paints and primers; resin sold
as an integral component of paints and primers; concrete sealers in the form of a coating; penetrating sealer coatings for use on decks; penetrating sealer coatings for use on concrete; protective
coatings for exterior and interior use on wood and concrete substrates; preservative coatings for concrete and wood surfaces; epoxy coating for wood, metal or masonry; acrylic latex filler coating
for rubber underlayments; surface coatings for athletic surfaces; acrylic polymer surface coatings for use on asphalt and concrete roller hockey facilities; acrylic coatings and surfacing materials
for asphalt, concrete, athletic surfaces such as tennis courts, recreational areas, and other pavements; polymer surface coating composition for multisport gymnasium floors; acrylic color coating
filler for asphalt and concrete; liquid coatings in the nature of a paint, namely, liquid enamels, fillers, paints, primers, sealers, shellac, stains and varnishes; liquid thinners for paints and
varnishes; resinous liquid floor and wall coatings; liquid coatings for the protection of roofing; heavy paintlike coatings for concrete blocks; liquid tinting colors for enamels, fillers, paints,
primers, and concrete block coatings; finishing material for asphalt, namely, penetrating sealer coatings, concrete coatings being penetrating sealer coatings, plaster and masonry coatings being
penetrating sealer coatings; cement bonding compounds being unprocessed natural resins for use in the manufacture of adhesives; and masonry water-repelling compounds being penetrating sealer
coatings; surface coating compositions, namely, non-skid compositions for floors and the like all being penetrating sealer coatings with a high friction finish; reflective acrylic paint for paved
surfaces; paints, varnishes and preservatives against rust and against deterioration of wood; surface coatings for interior and exterior use to protect against and treat growth of mold, mildew,
bacteria and fungi; primers for preparing surfaces to be painted and finishes, both containing antimicrobial products to prevent the growth of mold, mildew and similar organisms on the structural
components of buildings and on walls, floors and countertop surfaces, and on personal sports equipment and sports surfaces, namely, tennis courts, tracks and turf; acrylic coatings being penetrating
sealer coatings for use in a system to remediate contamination from mold, mildew and similar organisms that accumulate on the structural components of buildings; rubber coatings and surfacing
materials for tennis courts, recreational areas and other pavements being penetrating sealer coatings; all-surface paving compound being penetrating sealer coatings; elastomeric coating compositions
for asphalt, concrete and wood all being penetrating sealer coatings; paints, architectural coatings, sealers, and binders, all being penetrating sealer coatings; decorative coating material
containing pigments, mineral fillers and fibers for covering paved surfaces; Antimicrobial cleaning agents, namely, disinfectant soaps, for use in controlling, remediating and preventing the growth
of mold, mildew and similar organisms on the structural components of buildings on walls, floors and countertop surfaces, for cleaning and disinfecting personal sports equipment, and on sports
surfaces, namely, tennis courts, tracks and turf, for use in commercial and residential applications; antimicrobial preparations for inhibiting and treating mold and mildew; antimicrobial acrylic
coatings to prevent the growth of mold, mildew and similar organisms on the structural components of buildings, on walls, floors and countertop surfaces, for cleaning and disinfecting personal sports
equipment, and on sports surfaces, namely, tennis courts, tracks and turf; antimicrobial cleaning agents, namely, sanitary sterilizing preparations, fungicides, disinfectants, sanitizers,
antiseptics, and germicides, for use in controlling, remediating and preventing growth of mold, mildew and similar organisms on the structural components of buildings, on walls, floors and countertop
surfaces, for cleaning and disinfecting personal sports equipment, and on sports surfaces, namely, tennis courts, tracks and turf, for use in commercial and residential applications; Asphalt coatings
and surfacing materials for athletic surfaces, namely, asphalt coatings and surfacing materials for tennis courts, recreational areas and other pavements, all the forgoing being asphalt; Polyurethane
foam adhesive for use with roofing in the building industry; polyurethane adhesives for industrial use; adhesives for general use, namely, adhesives for use in construction, aerosol foam adhesives
for use in connection with residential and commercial construction projects; chemical spray solvent cleaner used to dissolve uncured foam; Polyurethane adhesive application systems consisting of
power-operated polyurethane adhesive dispensing machines and parts therefor and polyurethane adhesive chemicals, sold as a unit, for use in building and construction industries; Power-operated
hand-held dispenser attached to containers for use in dispensing a foam spray; power-operated spray guns for foamable synthetics; push carts specially designed for transporting cylinders for
machines; Polyurethane sealants; sealants for buildings; Polyurethane spray foam for sealing mine shafts; polyurethane spray foams for use as insulation in exterior home walls, cement blocks, window
fenestration, marine insulation, and extruded profile channel fill; polyurethane foam kit comprised of polyurethane spray foam and foam feed tanks and refills thereof, plastic tubing, polyurethane
foam dispensers all for use in insulation, sealing, packaging, filling and marine flotation applications; aerosol foam sealant for use in connection with residential and commercial construction
projects; polyurethane spray foam with heated hoses, sold as a unit, for residential and commercial insulation purposes; foam products for door and window insulation, namely, polyurethane insulation
systems, namely, polyurethane foams for use as building insulation, polyurethane foam sealants for filling in gaps and cracks, and low pressure polyurethane spray foam sealants sold as a unit;
Plastic spray nozzles and tips for hand-operated pressurized dispensers of foam insulation that incorporate a temperature sensor that causes the nozzles and tips to change color as a temperature
warning to indicate whether the chemicals comprising the insulation are at the proper temperature for installation; color changing temperature warning plastic nozzles and tips for hand-operated
pressurized dispensers of foam insulation that indicate by changing color whether the chemicals comprising the insulation are at the proper temperature for installation; plastic nozzles and tips for
hand-operated pressurized dispensers of foam insulation
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
The owner's/holder's proposed attorney information: John Pickerill. Other appointed attorneys are Cindy Moyer; Courtney Thompson; Tracy Deutmeyer; Jake Abdo; Ann Wessberg. John Pickerill of
Fredrikson & Byron, P.A., is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
200 South 6th Street, Suite 4000
Minneapolis, Minnesota 55402
United States
612-492-7306(phone)
6124927077(fax)
ip@fredlaw.com
John Pickerill submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed,
and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $350 has been submitted with the application, representing payment for 1 class(es).
Declaration
Declaration Signature
Signature: /John Pickerill/ Date: 01/13/2022
Signatory's Name: John Pickerill
Signatory's Position: Attorney of record
Signatory's Phone Number: 612-492-7306
Signature method: Signed directly within the form
Payment Sale Number: 97218272
Payment Accounting Date: 01/13/2022
Serial Number: 97218272
Internet Transmission Date: Thu Jan 13 17:45:33 ET 2022
TEAS Stamp: USPTO/BAS-XXX.XX.XX.XXX-2022011317453383
2400-97218272-8101011ad1dc12326c0931afac
d1626a87e15a112811724e6cd83de48a5158e6e3
-CC-45323040-20220113174214735851