The mark consists of the stylized capital letters M and P in which the upper right hand corner of the M has a curved surface and the upper left hand corner of the P has a corresponding curved surface.
Mark For: MP™ trademark registration is intended to cover the categories of chemical products, namely, combustion chamber and fuel injection cleaner chemical additive.
Status
2021-12-27 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Chemicals) Chemicals used in industry, science and photography, as well as in agriculture, horticulture and forestry; unprocessed artificial resins, unprocessed plastics; manures; fire extinguishing compositions; tempering and soldering preparations; chemical substances for preserving foodstuffs; tanning substances; adhesives used in industry.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Gary M. Anderson
Timeline
2018-02-00
Date of First Use
2018-02-01
Date of First Use
2018-02-01
Date of Use In Commerce
2021-12-22
Application Filed
2021-12-25
Location: NEW APPLICATION PROCESSING
2021-12-25
Status: Live/Pending
2021-12-25
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
GARY M. ANDERSON FULWIDER PATTON LLP 111 W. OCEAN BLVD. SUITE 1510 LONG BEACH, CA 90802
Good, Services, and Codes
International Codes:
1
U.S. Codes:
001,005,006,010,026,046
International Codes:
3
U.S. Codes:
001,004,006,050,051,052
International Codes:
4
U.S. Codes:
001,006,015
Type Code
Type
DM0000
The mark consists of the stylized capital letters M and P in which the upper right hand corner of the M has a curved surface and the upper left hand corner of the P has a corresponding curved surface.
DM0000
The mark consists of the stylized capital letters M and P in which the upper right hand corner of the M has a curved surface and the upper left hand corner of the P has a corresponding curved surface.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
MOC Products Company, Inc.
Application
Drawing
| 