Mark For: GB™ trademark registration is intended to cover the categories of tools being parts of machines; cutting tools (mechanically operated tools, and machine driven tools); recessing tools (mechanically operated tools, and machine driven tools); piercing tools (mechanically operated tools, and machine driven tools); mechanical tools for machine tools; chucks being machine parts; drill chucks (parts of machines); tool holders being parts of machine tools; pre-setting tools for setting and adjusting tools, included in this class; modular couplings for machine tools.
Status
2021-09-15 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Kevin C. Brown
Attorney Docket Number
921_198
Timeline
2017-05-19
Trademark Registered
2021-09-12
Application Filed
2021-09-15
Location: NEW APPLICATION PROCESSING
2021-09-15
Status: Live/Pending
2021-09-15
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
KEVIN C. BROWN BURR & BROWN, PLLC P.O. BOX 869 FAYETTEVILLE, NY 13066
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
Type Code
Type
GS0071
Tools being parts of machines; cutting tools (mechanically operated tools, and machine driven tools); recessing tools (mechanically operated tools, and machine driven tools); piercing tools (mechanically operated tools, and machine driven tools); mechanical tools for machine tools; chucks being machine parts; drill chucks (parts of machines); tool holders being parts of machine tools; pre-setting tools for setting and adjusting tools, included in this class; modular couplings for machine tools
GS0071
mechanically operated piercing tools for metalworking being parts of mechanically operated machines; and power-operated piercing tools for metalworking being parts of machine-driven machines
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Guehring KG
Application
Drawing
| 