The mark consists of the character W above the character A within a square bisected horizontally by a line which serves as the horizontal diameter of a circle that passes through the character W at its uppermost point and the character A at its horizontal line.
Mark For: WA® trademark registration is intended to cover the categories of surveying; Civil engineering; Engineering services for the construction of water treatment and purification plants, solid waste treatment plants and other municipal infrastructure facilities; Hydraulic and hydrologic engineering services, namely, storm sewer system design, hydrology and flood studies, storm water management systems, water quality design, storm system mapping, platting, and flood plain mapping; Land use planning services; Landscape architectural design; Planning of buildings and infrastructure systems for buildings; Traffic and transportation engineering; Urban design planning services.
Status
2021-07-30 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Computer, scientific & legal) Scientific and technological services and research and design relating thereto: industrial analysis and research services; design and development of computer hardware and software; legal services.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Conor McCullough
Timeline
2017-11-01
Date of First Use
2017-11-01
Date of Use In Commerce
2021-07-27
Application Filed
2021-07-30
Location: NEW APPLICATION PROCESSING
2021-07-30
Status: Live/Pending
2021-07-30
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
CONOR MCCULLOUGH STEPHEN N. BARNES, JR., LLC 3725 VINEVILLE AVE. MACON, GA 31204
Good, Services, and Codes
International Codes:
42
U.S. Codes:
100,101
Type Code
Type
DM0000
The mark consists of the character W above the character A within a square bisected horizontally by a line which serves as the horizontal diameter of a circle that passes through the character W at its uppermost point and the character A at its horizontal line.
DM0000
The mark consists of the character W above the character A within a square bisected horizontally by a line which serves as the horizontal diameter of a circle that passes through the character W at its uppermost point and the character A at its horizontal line.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
W&A Engineering, Inc.
Drawing
TEAS Plus New Application
| 