Mark For: FLEXA™ trademark registration is intended to cover the categories of hoses made of metal for as protective conduits for protecting electrical conductors and electrical cables; metal hoses for use as suction and vacuum hoses, exhaust gas and venting hoses, and blower hoses; and metal fittings, metal couplings, and metal connectors, all for use with the hoses identified herein; Hoses made of plastic for use as protective conduits for protecting electrical conductors and electrical cables; plastic hoses for use as suction and vacuum hoses, exhaust gas and venting hoses, and blower hoses; and plastic fittings, plastic couplings, and plastic connectors, all for use with the hoses identified herein.
Status
2021-07-09 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Ojeiku C. Aisiku
Attorney Docket Number
300721-00023
Timeline
2021-07-06
Application Filed
2021-07-09
Location: NEW APPLICATION PROCESSING
2021-07-09
Status: Live/Pending
2021-07-09
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
OJEIKU C. AISIKU ECKERT SEAMANS CHERIN & MELLOTT, LLC 600 GRANT STREET U.S. STEEL TOWER PITTSBURGH, PA 15219
Good, Services, and Codes
International Codes:
6
U.S. Codes:
002,012,013,014,023,025,050
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
Hoses made of metal for as protective conduits for protecting electrical conductors and electrical cables; metal hoses for use as suction and vacuum hoses, exhaust gas and venting hoses, and blower hoses; and metal fittings, metal couplings, and metal connectors, all for use with the hoses identified herein; Hoses made of plastic for use as protective conduits for protecting electrical conductors and electrical cables; plastic hoses for use as suction and vacuum hoses, exhaust gas and venting hoses, and blower hoses; and plastic fittings, plastic couplings, and plastic connectors, all for use with the hoses identified herein
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
STENGER GmbH
Drawing
TEAS Plus New Application
| 