The mark consists of a large capital letter "G" on the left-hand side of the logo, stylized to look like a downward facing axe head. The top of the "G" is smaller than the bottom of the "G." The top of the G is a straight line with sharp edges of the "G" creating the poll and the neck of the axe. The bottom of the "G" is curved to create the cutting edge of the axe. Inside the letter "G" is the letter "A" creating a smaller downward facing axe head that looks similar to the "G." The horizontal cross of the "A" is shared by the horizontal cross of the "G." Below the "A" but still inside the "G" is curved line that mirrors the outside cutting edge created by the "G". The logo appears on a white background but does not claim the white background as a part of the mark.
Mark For: GA™ trademark registration is intended to cover the categories of development and production of the advertising content of banners and signs for advertising, promotional, or marketing purposes.
Status
2021-06-11 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
Geometric figures forming letters, numerals or punctuation
Attorney of Record
LYNNE SHELTON, ESQ. SHELTON LAW & ASSOCIATES, LLC 1320 ARROW POINT DRIVE, SUITE 501 CEDAR PARK, TX 78613
Good, Services, and Codes
International Codes:
35
U.S. Codes:
100,101,102
International Codes:
41
U.S. Codes:
100,101,107
International Codes:
43
U.S. Codes:
100,101
Type Code
Type
DM0000
The mark consists of a large capital letter "G" on the left-hand side of the logo, stylized to look like a downward facing axe head. The top of the "G" is smaller than the bottom of the "G." The top of the G is a straight line with sharp edges of the "G" creating the poll and the neck of the axe. The bottom of the "G" is curved to create the cutting edge of the axe. Inside the letter "G" is the letter "A" creating a smaller downward facing axe head that looks similar to the "G." The horizontal cross of the "A" is shared by the horizontal cross of the "G." Below the "A" but still inside the "G" is curved line that mirrors the outside cutting edge created by the "G". The logo appears on a white background but does not claim the white background as a part of the mark.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.