VITALPATH

Catheter and Medical Design LLC

Application Filed: 2021-05-28
Trademark Application Details
Trademark Logo VITALPATH

Mark For: VITALPATH™ trademark registration is intended to cover the categories of custom manufacturing of component parts and finished medical devices; fabricating medical catheter tubing products, namely braid or coil reinforced plastic tubing extrusion, laser cut polymer and metal tubing, laser welded subassemblies and laser ablated wire components.

Status

2021-06-01 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.


Research OneLook Acronym Finder
Serial Number90742851
Mark Literal ElementsVITALPATH
Mark Drawing Type4 - STANDARD CHARACTER MARK
Mark TypeService Mark
Current LocationNEW APPLICATION PROCESSING 2021-06-01
Basis1(b)
Class StatusACTIVE
Primary US Classes
  • 100: Miscellaneous
  • 103: Construction and Repair
  • 106: Material Treatment
Primary International Class
  • 040 - Primary Class
  • (Treatment of materials) Treatment of materials.
Filed UseNo
Current UseNo
Intent To UseYes
Filed ITUYes
44D FiledNo
44E CurrentNo
66A CurrentNo
Current BasisNo
No BasisNo
Attorney NameApril White
Attorney Docket Number48333.00002

Timeline

2021-05-28Application Filed
2021-06-01Location: NEW APPLICATION PROCESSING
2021-06-01Status: Live/Pending
2021-06-01Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
2021-06-01Transaction Date

Trademark Parties (Applicants & Owners)

Party: Catheter and Medical Design LLC
Address1758 Terrace Drive Roseville, MINNESOTA UNITED STATES 55113
Legal Entity TypeLimited Liability Company
Legal Entity StateMINNESOTA

Documents

ApplicationMULTI2021-05-28
DrawingJPEG2021-05-28

Attorney of Record

APRIL WHITE
PAUL HASTINGS LLP
4747 EXECUTIVE DR., 12TH FLOOR
SAN DIEGO, CA 92121

Good, Services, and Codes

International Codes:40
U.S. Codes:100,103,106
Type CodeType
GS0401Custom manufacturing of component parts and finished medical devices; fabricating medical catheter tubing products, namely braid or coil reinforced plastic tubing extrusion, laser cut polymer and metal tubing, laser welded subassemblies and laser ablated wire components
GS0401Custom manufacturing of medical devices and component parts therefor; Custom fabrication of medical catheter tubing products, namely, braid or coil reinforced plastic tubing extrusion, laser cut polymer and metal tubing, laser welded subassemblies and laser ablated wire components for others

Trademark Filing History

DescriptionDateProceeding Number
NEW APPLICATION ENTERED IN TRAM2021-06-01

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed