Mark For: OMEGA™ trademark registration is intended to cover the categories of sawmills; sawmill parts; sawmill accessories, namely, manual log rollers, hydraulic log turners, manual and hydraulic toe boards, lap siding and shingle makers, sawmill bed extensions, power-feed and power sawhead packages consisting of electric motors, control boxes and remotes, log dogs, log rests, sawmill covers, hydraulic log loaders, log ramps, lighting kits, hydraulic pumps, sawmill log clamping mechanisms, namely, machine tools in the nature of clamps for use in the clamping of logs to sawmill, bed levelers, bed support jacks, legs and stands, blade systems consisting of blade guide rollers or ceramic guides, portable board edgers, and trailer packages consisting of axles, wheels and drawbars and bed support jacks and legs.
Status
2021-04-20 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
Yes
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
Nicholas J. Gingo
Attorney Name
Nicholas J. Gingo
Attorney Docket Number
RIDOT0139US
Timeline
2021-04-16
Application Filed
2021-04-20
Location: NEW APPLICATION PROCESSING
2021-04-20
Status: Live/Pending
2021-04-20
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
NICHOLAS J. GINGO RENNER, OTTO, BOISSELLE & SKLAR, LLP 1621 EUCLID AVE. 19TH FLOOR CLEVELAND, OH 44115
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
Type Code
Type
GS0071
Sawmills; sawmill parts; sawmill accessories, namely, manual log rollers, hydraulic log turners, manual and hydraulic toe boards, lap siding and shingle makers, sawmill bed extensions, power-feed and power sawhead packages consisting of electric motors, control boxes and remotes, log dogs, log rests, sawmill covers, hydraulic log loaders, log ramps, lighting kits, hydraulic pumps, sawmill log clamping mechanisms, namely, machine tools in the nature of clamps for use in the clamping of logs to sawmill, bed levelers, bed support jacks, legs and stands, blade systems consisting of blade guide rollers or ceramic guides, portable board edgers, and trailer packages consisting of axles, wheels and drawbars and bed support jacks and legs
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Norwood Industries Inc.
Application
Drawing
| 