The mark consists of The letters "M", "G", and "P" appearing stylized in the form of a leaf, where the letter "M" is on the top-left of the image, the letter "G" is to the immediate right of the letter "M" and positioned at the top-right of the image, and the letter "P" is positioned at the bottom of the image and positioned beneath the letters "M" and "G" respectively; said letter "P" has the tail-end of the P extending to the bottom-left as in the stem of said leaf.
Mark For: MGP® trademark registration is intended to cover the categories of blades for power saws; Chains for chain saws; Power saw blades; Replacement parts for chain saws, namely, bars and chains; Replacement parts for chain saws; Brush cutter blades.
Status
2021-03-09 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Brandon Carlin
Attorney Docket Number
2787.002
Timeline
2020-12-24
Date of First Use
2020-12-24
Date of Use In Commerce
2021-03-04
Application Filed
2021-03-08
Location: NEW APPLICATION PROCESSING
2021-03-08
Status: Live/Pending
2021-03-08
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
BRANDON CARLIN LUMMIS & BARKLEY, LLC 3273 CHURCH ST STEVENS POINT, WI 54481
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
International Codes:
9
U.S. Codes:
021,023,026,036,038
International Codes:
25
U.S. Codes:
022,039
International Codes:
39
U.S. Codes:
100,105
Type Code
Type
DM0000
The mark consists of The letters "M", "G", and "P" appearing stylized in the form of a leaf, where the letter "M" is on the top-left of the image, the letter "G" is to the immediate right of the letter "M" and positioned at the top-right of the image, and the letter "P" is positioned at the bottom of the image and positioned beneath the letters "M" and "G" respectively; said letter "P" has the tail-end of the P extending to the bottom-left as in the stem of said leaf.
DM0000
The mark consists of The letters "M", "G", and "P" appearing stylized in the form of a leaf, where the letter "M" is on the top-left of the image, the letter "G" is to the immediate right of the letter "M" and positioned at the top-right of the image, and the letter "P" is positioned at the bottom of the image and positioned beneath the letters "M" and "G" respectively; said letter "P" has the tail-end of the P extending to the bottom-left as in the stem of said leaf.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
www.mgpsupply.com
OneLook
Acronym Finder
MGP Supply LLC
Application
Drawing
| 