Mark For: BIOGUARD™ trademark registration is intended to cover the categories of soluble glass containing anti-microbial metal ions that is mixed together with the ABS resin prior to the injection molding process of plastic parts thereby coating the injection molded ABS plastic parts with an anti-microbial coating for use in coating of plastic appliances to prevent cross bacteria and cross contamination, on medical devices in hospitals and healthcare centers, food processing and handling, public dining areas, public restrooms and toilets, public sports, leisure and lay facilities, in the kitchen, in the bathroom, in schools and daycare centers, restaurants and food courts, drinking fountains and water dispensers, coffee makers, ovens and stoves, other cooking devices.
Status
2020-12-27 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Chemicals) Chemicals used in industry, science and photography, as well as in agriculture, horticulture and forestry; unprocessed artificial resins, unprocessed plastics; manures; fire extinguishing compositions; tempering and soldering preparations; chemical substances for preserving foodstuffs; tanning substances; adhesives used in industry.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Sarah I. Cohen
Timeline
2020-12-23
Application Filed
2020-12-26
Location: NEW APPLICATION PROCESSING
2020-12-26
Status: Live/Pending
2020-12-26
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
SARAH I. COHEN LOMBARD & GELIEBTER LLP 230 PARK AVE, 4TH FL WEST NEW YORK, NY 10169
Good, Services, and Codes
International Codes:
1
U.S. Codes:
001,005,006,010,026,046
Type Code
Type
GS0011
soluble glass containing anti-microbial metal ions that is mixed together with the ABS resin prior to the injection molding process of plastic parts thereby coating the injection molded ABS plastic parts with an anti-microbial coating for use in coating of plastic appliances to prevent cross bacteria and cross contamination, on medical devices in hospitals and healthcare centers, food processing and handling, public dining areas, public restrooms and toilets, public sports, leisure and lay facilities, in the kitchen, in the bathroom, in schools and daycare centers, restaurants and food courts, drinking fountains and water dispensers, coffee makers, ovens and stoves, other cooking devices
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
BHRS Group, LLC
Application
Drawing
| 