To: | Concrete Polishing & Prep Solutions Inc. (Timtheattorney@aol.com) |
Subject: | U.S. Trademark Application Serial No. 90317590 - ULTRAPRO - N/A |
Sent: | April 23, 2021 05:37:17 PM |
Sent As: | ecom113@uspto.gov |
Attachments: |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 90317590
Mark: ULTRAPRO
|
|
Correspondence Address:
|
|
Applicant: Concrete Polishing & Prep Solutions Inc.
|
|
Reference/Docket No. N/A
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: April 23, 2021
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SEARCH OF USPTO DATABASE OF MARKS
SUMMARY OF ISSUES
SPECIMEN & REQUEST FOR INFORMATION REQUIREMENT
Specimen does not show use in International Class 002. Registration is refused because the specimen does not show the applied-for mark as actually used in commerce in connection with any of the goods specified in International Class 002. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); In re Keep A Breast Found., 123 USPQ2d 1869, 1876-79 (TTAB 2017); TMEP §§904, 904.07(a), 1301.04(d), (g)(i). An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark as actually used in commerce for each international class of goods identified in the application. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a); see In re Gulf Coast Nutritionals, Inc., 106 USPQ2d 1243, 1247 (TTAB 2013).
Specifically, the specimen shows that mark used on “concrete densifier.” The current application is for “concrete moisture barrier coating,” and “concrete sealers in the form of a coating.” Concrete densifier is not a coating/sealer, but is a chemical compound used to fill pores in concrete to increase surface density. See attached Wikipedia evidence. Thus, concrete densifier is properly classified in International Class 001 with chemicals as opposed to Class 002 with paints and sealants. See USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual, Term ID No. 001-1544.
Therefore, the applicant must provide a specimen showing the mark used in connection with concrete barrier coating and/or sealer.
Specimen does not show direct association between mark and services. Registration is refused because the specimen does not show a direct association between the mark and the services and fails to show the applied-for mark as actually used in commerce with the identified services in International Class 037. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a), (b)(2); TMEP §§904, 904.07(a), 1301.04(f)(ii), (g)(i). An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark as actually used in commerce for each international class of services identified in the application. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).
When determining whether a mark is used in connection with the services in the application, a key consideration is the perception of the user. In re JobDiva, Inc., 843 F.3d 936, 942, 121 USPQ2d 1122, 1126 (Fed. Cir. 2016) (citing Lens.com, Inc. v. 1-800 Contacts, Inc., 686 F.3d 1376, 1381-82, 103 USPQ2d 1672, 1676 (Fed Cir. 2012)). A specimen must show the mark used in a way that would create in the minds of potential consumers a sufficient nexus or direct association between the mark and the services being offered. See 37 C.F.R. §2.56(b)(2); In re Universal Oil Prods. Co., 476 F.2d 653, 655, 177 USPQ2d 456, 457 (C.C.P.A. 1973); TMEP §1301.04(f)(ii).
To show a direct association, specimens consisting of advertising or promotional materials must (1) explicitly reference the services and (2) show the mark used to identify the services and their source. In re The Cardio Grp., LLC, 2019 USPQ2d 227232, at *2 (TTAB 2019) (quoting In re WAY Media, LLC, 118 USPQ2d 1697, 1698 (TTAB 2016)); TMEP §1301.04(f)(ii). Although the exact nature of the services does not need to be specified in the specimen, there must be something that creates in the mind of the purchaser an association between the mark and the services. In re Adair, 45 USPQ2d 1211, 1215 (TTAB 1997) (quoting In re Johnson Controls Inc., 33 USPQ2d 1318, 1320 (TTAB 1994)).
To show a direct association, specimens showing the mark used in rendering the identified services need not explicitly refer to those services, but “there must be something which creates in the mind of the purchaser an association between the mark and the service activity.” In re The Cardio Grp., LLC, 2019 USPQ2d 227232, at *1 (TTAB 2019) (citing In re WAY Media, LLC, 118 USPQ2d 1697, 1698 (TTAB 2016)).
In the present case, the specimen does not show a direct association between the mark and services in that all three specimens consist only of the mark used on the label for concrete densifier goods. The specimens contain no reference to any type of services provided by the applicant, explicit or otherwise. Therefore, the specimens fail to establish that the applicant provides services for others.
Digitally created or altered image or mockup is not an acceptable specimen. Registration is refused because the specimen appears to consist of a digitally created or altered image or a mockup of a depiction of the mark on the goods or their packaging and does not show the applied-for mark as actually used in commerce in International Classes 002 and/or 037. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a), (c); TMEP §§904.04(a), 904.07(a).
An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark as actually used in commerce for each international class of goods identified in the application. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). “Use in commerce” means (1) a bona fide use of the applied-for mark in the ordinary course of trade (and not merely to reserve a right in the mark), (2) the mark is placed in any manner on the goods, packaging, tags or labels affixed to the goods, or displays that directly associate the mark with the goods and have a point-of-sale nature, and (3) the goods are actually sold or transported in commerce. See 15 U.S.C. §1127.
An image of a product or packaging that has been digitally created or altered to include the mark or a mockup of how the mark may be displayed on the product or packaging is not a proper specimen for goods because it does not show actual use of the mark in commerce. See 15 U.S.C. §1127; 37 C.F.R. §2.56(c); TMEP §904.04(a).
In this case, the provided specimens consist of digitally created images. The label on the goods is blurry and pixilated as if created digitally. Moreover, the images contain no depth and are clearly not actual images of the products but merely digitally created two dimensional renderings. Therefore, the images appear to be digital mockups of how the label is intended to appear and the specimens do not show actual use of the mark in commerce.
Response options. Applicant may respond to the specimen refusal by satisfying one of the following options for each applicable international class:
(1) Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application and (b) shows the mark in actual use in commerce for the goods identified in the application. A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20: “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.” The substitute specimen cannot be accepted without this statement. For instructions on how to submit a different specimen using the online Trademark Electronic Application System (TEAS) form, see the Specimen webpage.
(2) Amend the filing basis to intent to use under Section 1(b) (which includes withdrawing an amendment to allege use, if one was filed), as no specimen is required before publication. This option will later necessitate additional fee(s) and filing requirements, including a specimen.
If applicant submits an acceptable verified substitute specimen or amends to Section 1(b), the requirement below for additional information/documentation about the original specimen will be withdrawn. The requirement below as to the original specimen will be made final if applicant submits a substitute specimen that is not acceptable or does not amend to Section 1(b), and does not also respond completely to the requirement below.
Additional information/documentation about original specimen(s) required. To permit proper examination of the application record for compliance with use in commerce requirements, applicant must respond to the following requests for information and documentation about the specimen(s). See 37 C.F.R. §2.61(b); TMEP §814. A specimen must show the mark as actually used in commerce, which means use in the ordinary course of trade, and not merely to reserve a right in the trademark. 15 U.S.C. §§1051, 1052, 1127. Because the specimen of record appears to be digitally created or altered, or is a mockup, further information is necessary to determine whether the specimen is in actual use in commerce.
Answer for each specimen/photograph/image previously provided. For any website source, provide a digital copy of the entire webpage from top to bottom, as rendered in an Internet browser, that includes the URL and access or print date. TMEP §710.01(b) (citing In re I-Coat Co., 126 USPQ2d 1730, 1733 (TTAB 2018)).
(1) Identify the particular good(s) listed in the application for which the specimen(s) was submitted to show use of the mark.
(2) Explain whether the specimen was created for submission with this application. If so, specify the date each specimen was created. If applicant used the image(s) of the goods shown in the specimen(s) from a third-party website, provide the URL of the website and a digital copy of relevant webpage(s) for each image.
(3) Provide information about and examples of how applicant’s goods appear in the actual sales environment.
(a) If sold in stores, provide a representative sample of the name(s) of the stores and of photographs showing the goods for sale in the named stores, such as photographs of the sales displays or goods on shelves with the mark.
(b) If sold online, provide a representative sample of the name(s) of the online retailers, the website URL(s) for each named retailer, and a digital copy of the webpages showing the goods for sale on the named website.
(c) If sold in another type of sales environment (e.g., catalogs, trade shows), identify the environment and provide photographs and/or documentation showing the goods for sale in that environment.
(4) If the information in question (3) about how the goods appear in the actual sales environment is not available to applicant, please describe how applicant’s goods are sold or transported and provide photographs and other documentation showing how applicant’s mark appears on the goods and/or its packaging when the goods are sold or transported to or within the United States.
(5) For each category of sales environment specified in response to questions (3) and (4), specify when the goods bearing the mark were first available for purchase within the United States, the date of the first sale of the goods to or within the United States, and whether the goods are still for sale to or within the United States in that environment.
(6) For the goods identified in response to question (1), provide documentation that shows payment or other consideration made for the goods, redacting personal or private information of buyers as necessary.
Failure to comply with a requirement to furnish information is grounds for refusing registration. In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814. Merely stating that information is available on applicant’s or a third party website or providing a hyperlink of such a website is an insufficient response and will not make the additional information or materials of record. See In re Planalytics, Inc., 70 USPQ2d 1453, 1457-58 (TTAB 2004).
RESPONSE GUIDELINES
For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action. For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above. For a requirement, applicant should set forth the changes or statements. Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.
Please call or email the assigned trademark examining attorney with questions about this Office action. Although an examining attorney cannot provide legal advice, the examining attorney can provide additional explanation about the refusal(s) and/or requirement(s) in this Office action. See TMEP §§705.02, 709.06.
The USPTO does not accept emails as responses to Office actions; however, emails can be used for informal communications and are included in the application record. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.
How to respond. Click to file a response to this nonfinal Office action.
/Fox, Lyal/
Lyal Fox
Examing Attorney
Law Office 113
571-270-7884
lyal.fox@uspto.gov
RESPONSE GUIDANCE