Mark For: 4EVER™ trademark registration is intended to cover the categories of universal joints for machine parts; joints as machine parts and component machine parts used for repair and replacement of drive shafts, half shafts, and prop shafts for machines, namely, universal joints, companion flanges, flange yokes, slip yokes, end yokes, center and tube yokes, shafting, tubing, yoke and tube assemblies comprised of a yoke and tubes, stub shafts, yoke shafts, double cardan constant velocity assemblies comprised of two double cardan joints, an h-yoke, a ball socket yoke and a ball-stud yoke, center support bearings, and driveshaft and propeller shaft shielding; high speed constant velocity joints being parts of machines.
Status
2020-10-29 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Scott J. Slavick
Attorney Docket Number
NEAP-0144
Timeline
2020-10-26
Application Filed
2020-10-29
Location: NEW APPLICATION PROCESSING
2020-10-29
Status: Live/Pending
2020-10-29
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
SCOTT J. SLAVICK BARACK FERRAZZANO KIRSCHBAUM & NAGELBERG 200 WEST MADISON STREET, SUITE 3900 CHICAGO, IL 60606
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
International Codes:
12
U.S. Codes:
019,021,023,031,035,044
International Codes:
40
U.S. Codes:
100,103,106
Type Code
Type
GS0071
universal joints for machine parts; joints as machine parts and component machine parts used for repair and replacement of drive shafts, half shafts, and prop shafts for machines, namely, universal joints, companion flanges, flange yokes, slip yokes, end yokes, center and tube yokes, shafting, tubing, yoke and tube assemblies comprised of a yoke and tubes, stub shafts, yoke shafts, double cardan constant velocity assemblies comprised of two double cardan joints, an h-yoke, a ball socket yoke and a ball-stud yoke, center support bearings, and driveshaft and propeller shaft shielding; high speed constant velocity joints being parts of machines
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Neapco Intellectual Property Holdings, LLC
Application
Drawing
| 