SMARTPORT

Glycon Corp.

Application Filed: 2020-09-16
Trademark Application Details
Trademark Logo SMARTPORT

Mark For: SMARTPORT™ trademark registration is intended to cover the categories of injection molding, blow molding, and extruder machine parts, namely, plasticating barrel and feed screw wear measuring devices for injection molding, blow molding, and extruder machines.

Status

2020-09-20 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.


Research OneLook Acronym Finder
Serial Number90186028
Mark Literal ElementsSMARTPORT
Mark Drawing Type4 - STANDARD CHARACTER MARK
Mark TypeTrademark
Current LocationNEW APPLICATION PROCESSING 2020-09-19
Basis1(b)
Class StatusACTIVE
Primary US Classes
  • 013: Hardware, Plumbing and Steamfitting Supplies
  • 019: Vehicles
  • 021: Electrical Apparatus, Machines and Supplies
  • 023: Cutlery, Machinery, Tools and Parts Thereof
  • 031: Filters and Refrigerators
  • 034: Heating, Lighting and Ventilating Apparatus
  • 035: Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
  • 007 - Primary Class
  • (Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed UseNo
Current UseNo
Intent To UseYes
Filed ITUYes
44D FiledNo
44E CurrentNo
66A CurrentNo
Current BasisNo
No BasisNo
Attorney NameMichael E. Dockins
Attorney Docket Number209353

Timeline

2020-09-16Application Filed
2020-09-19Location: NEW APPLICATION PROCESSING
2020-09-19Status: Live/Pending
2020-09-19Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
2020-09-19Transaction Date

Trademark Parties (Applicants & Owners)

Party: Glycon Corp.
Address912 Industrial Drive Tecumseh, MICHIGAN UNITED STATES 49286
Legal Entity TypeCorporation
Legal Entity StateMICHIGAN

Documents

ApplicationMULTI2020-09-16
DrawingIMAGE/JPEG2020-09-16

Attorney of Record

MICHAEL E. DOCKINS
SHUMAKER LOOP & KENDRICK
1000 JACKSON ST.
TOLEDO, OH 43604

Good, Services, and Codes

International Codes:7
U.S. Codes:013,019,021,023,031,034,035
Type CodeType
GS0071injection molding, blow molding, and extruder machine parts, namely, plasticating barrel and feed screw wear measuring devices for injection molding, blow molding, and extruder machines

Trademark Filing History

DescriptionDateProceeding Number
NEW APPLICATION ENTERED IN TRAM2020-09-19

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed