Mark For: BASIC CONCEPTS® trademark registration is intended to cover the categories of reusable spill containment systems for liquid spills or releases, namely, berms made primarily of polymer or fabric; secondary containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric; Reusable spill containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric; support bases and pads made of polymeric foam substrates for use with oil and gas, refinery, and chemical processing equipment and storage tanks.
Status
2020-04-27 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Nonmetallic building materials) Building materials (nonmetallic); nonmetallic rigid pipes for building; asphalt, pitch and bitumen; nonmetallic transportable buildings; monuments, not of metal.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
J. Bennett Mullinax
Attorney Docket Number
BCI-51-TM
Timeline
1988-03-01
Date of First Use
1998-03-01
Date of Use In Commerce
2020-04-23
Application Filed
2020-04-27
Location: NEW APPLICATION PROCESSING
2020-04-27
Status: Live/Pending
2020-04-27
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
J. BENNETT MULLINAX J. BENNETT MULLINAX, LLC PO BOX 26029 GREENVILLE, SC 29616
Good, Services, and Codes
International Codes:
19
U.S. Codes:
001,012,033,050
International Codes:
37
U.S. Codes:
100,103,106
International Codes:
39
U.S. Codes:
100,105
International Codes:
42
U.S. Codes:
100,101
Type Code
Type
GS0191
Reusable spill containment systems for liquid spills or releases, namely, berms made primarily of polymer or fabric; secondary containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric; Reusable spill containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric; support bases and pads made of polymeric foam substrates for use with oil and gas, refinery, and chemical processing equipment and storage tanks
GS0191
Reusable spill containment systems for liquid spills or releases, namely, berms made primarily of polymer or fabric; secondary containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric; Reusable spill containment systems for liquid spills or releases, namely, berms made predominantly of polymer or fabric
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Basic Concepts, Inc.
Application
Drawing
| 