Mark For: SURE-CUT® trademark registration is intended to cover the categories of woodworking tools; cutting tools for use with wood; cutting tools for use with wood, namely saws; cutting tools for use with wood, namely, miter saws, cross cut saws, rip cut saws, saw guides and saw tracks; clamps; woodworking tools, namely backstops that provide support during a woodworking operation; cutting tools, namely backstops that provide support during a cutting operation; cutting tools, namely, sacrificial zero-clearance back fence that provides full material support during the cutting process.
Status
2020-03-06 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
CHRISTOPHER A. PROSKEY BROWNWINICK LAW FIRM 666 GRAND AVENUE, SUITE 2000 DES MOINES, IA 50309
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
International Codes:
8
U.S. Codes:
023,028,044
Type Code
Type
GS0081
Woodworking tools; cutting tools for use with wood; cutting tools for use with wood, namely saws; cutting tools for use with wood, namely, miter saws, cross cut saws, rip cut saws, saw guides and saw tracks; clamps; woodworking tools, namely backstops that provide support during a woodworking operation; cutting tools, namely backstops that provide support during a cutting operation; cutting tools, namely, sacrificial zero-clearance back fence that provides full material support during the cutting process
GS0081
cutting hand tools for use with wood, namely, saws; cutting hand tools for use with wood, namely, miter saws, cross cut saws, rip cut saws, manually operated saw guides and manually operated saw tracks; hand tools, namely, clamps; woodworking tools, namely, backstops that provide support during a woodworking operation in the nature of vise workpiece stops; cutting tools, namely, backstops that provide support during a cutting operation in the nature of vise workpiece stops; hand operated cutting guides for saws in the nature of a backboard sold as an integral component of finished saw guide systems composed of manually operated saw guides and clamps
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.