The mark consists of The mark consists of the term "EOS" appearing in a large, blocked, upper-case font. The stylized, upper case "E" is broken into 6 unequal sections by one horizontal line running through the center of the "E" and three vertical lines, each slightly to the right of the center of the "E". The three vertical lines of the "E" are all positioned at the same vertical axis creating the illusion that they are a single, continuous vertical line that disappears into the negative space of the mark. The top left and bottom right of the stylized "E" have rounded rather than sharp edges. The stylized, upper case "O" appears as a capsule shape, and lacks the empty space traditionally found in the center of a letter "O". The stylized, capsule-shaped "O" is broken into 4 equal sections by a horizontal line running through the center of the "O", and a vertical line running through the center of the "O". Other than the lines running through the "O", the stylized "O" appears as solid. The stylized, upper case "S" is broken into 6 unequal sections by one horizontal line running through the center of the "S" and three vertical lines, each running approximately through the center of the "S". The three vertical lines of the "S" are all positioned at the same vertical axis creating the illusion that they are a single, continuous vertical line that disappears into the negative space of the mark. The bottom and top "hooks" of the block letter "S" have sharp corners. The three horizontal lines running through the "E", "O", and "S" are all positioned at the same horizontal axis creating the illusion that they are a single, continuous horizontal line that disappears into the negative space of the mark.
Mark For: EOS™ trademark registration is intended to cover the categories of advanced and contemporary scientific apparatus and instruments for the purpose of conducting data acquisition, analyses, analog to digital conversions and/or trending, indication and/or signaling, measuring, surveying and/or weighing, including nautical, optical, thermal, pressure, and electrical parameters such as voltage, current, frequency, impedance etc., namely, ammeters, voltmeters, watt meters, timers and recorders, data analyzers, and control mechanism and control devices for the said purposes, including parts for all the aforementioned scientific equipment and instruments and any protective equipments in the form of isolators, surge protectors, grounding and shielding mechanism and related parts; Apparatus and installations for the transmission, distribution and control of electric current in the form of semiconductor power elements, electric usage meters, voltage testers, electric voltage and current transformers, electric conductors, and metal grounding bushings and metal grounding clamps, as parts, fittings and/or fixtures for coaxial cable, except for non-electric cable, machinery or machine parts; Apparatus and instruments for accumulating, conducting, controlling, correcting, regulating, switching, transforming of electric current and voltage, including parts required for such apparatus and instruments such as apparatus and instruments for controlling, conveying, distributing, storing, regulating and/or transforming electric current or voltage; Apparatus and instruments for emergency, rescue, response and teaching purposes in the form of indicators such as alarms, buzzers, and/or warning lamps in case of activities or incidents compromising security of personnel, equipment and facility such as fire, intrusion, theft, vandalizing etc. Data acquisition, processing and trending equipment, the mechanism and components required for such, namely, connectors, wires, interfaces and computers; Data protection apparatus such as surge arresters, shielding for protecting telephone and data transmission lines; Diagnostic apparatus for testing electrical systems and other scientific systems except for medical purposes; Electrical and electronic apparatus, devices, instruments and mechanisms and parts of such for the production, conversion, distribution, supply and storage (using batteries) of energy from alternative energy sources such as photovoltaic solar modules, solar panels, solar parks used to produce electricity from such sources; Electric and electronic installations for the remote control of automated industrial processes such as programmable logic controller (PLC), remote terminal unit (RTU) or supervisory control and data acquisition (SCADA); Low and medium voltage fuses and electrical safety devices such as surge protectors, voltage surge suppressors, electrical surge arrestors, circuit breakers and circuit closers, circuit overload protector devices and switchgears; Power distribution panels and cabinets in the nature of metal cabinets specially adapted to protect telecommunications equipment; Software and tools for controlling of power systems from electrical power generation to power distribution, industrial plants, buildings and facilities and similar software and tools for the purpose of controlling transportation of energy in the form of electricity, oil and/or gas; Accumulator boxes and electrical connection boxes; Amplifier; Anti-interference devices such as filters for radio interference suppression; Automatic steering apparatus such as simulators for vehicles steering and control; Automatic timer switch; Ballast for lighting equipment; Battery switch; Bushing insulator discs; Cable connection sleeve; Cable managing products; Cable sheath; Cable trays; Chargers for electric energy storage and batteries; Circuit breakers; Coaxial cable; Commutator switches; Computer peripherals and interfaces; Condensers or capacitors for storage of static charges; Connection sleeves - electric connections and connectors, wire connectors, and electrical and electronic connectors; Control board; Current and voltage inverters; Current and voltage rectifiers; Current collector; Current commutator; Current converters; Current limiter; Demagnetizer; Digital temperature controller; Disconnectors; Distribution boards; Distribution boxes; Distribution consoles; Distribution plugs and sockets; Distribution system fittings; Earthing and lightning protection; Electric adjustment device; Electric armature; Electric cables, lines and wires; Electric coil; Electric collectors i.e. photovoltaic cells (PV cells) or solar cells; Electric contactor; Electric current carrying bus bars or bus ways; Electric current switches; Electric dimmer; Electric diodes; Electric heating; Electric junction box; Electric measuring and regulating apparatus in the form of voltage regulators; Electric metering devices; Electric plugs; Electric power distribution installations such as distribution blocks, distributing boxes, distribution panels, distribution units; Electric relays; Electric resistances; Electric sockets; Electrical cable ducts; Electrical conductor; Electrical conduits; Electrical connector housings and electrical connector boxes; Electrical connector; Electrical connectors for electronic circuits; connectors for electrical power network; Electrical contact; Electrical coupler; Electrical ducts; Electrical energy storage system such as batteries; Electrical equipment and control device; Electrical equipment for industrial remote control operation; Electrical inductors or chokes; Electrical transformers; Electromagnetic coil; Electronic networking devices such as modems; Electronic, magnetic and optical and solid state storage for data such as blank floppy disks, blank magnetic disks, blank optical disks, and blank solid state devices; Enclosures; Engineering systems and tools; Equipment or apparatus mounting arrangements; Fiber optic cable; Filter capacitor; Fuel cells; Fused cutouts; Gate box; Grounding and shielding components and systems; Heavy current circuits and aerial cables for such currents; High and low voltage switch board; High frequency wave trappers; High-voltage explosion-proof power distribution device; Identification sheaths for cables used in electrical transmission lines and identification yarns in the form of sheaths for transmission lines of power system; Incoming feeders; Inductor coil holder; Insulated copper wire; Insulation components; Integrated circuits, microcontrollers and microprocessors; Integrated switching circuit chips; Intelligent control system distribution network; Intelligent control system for motors; Isolators; Lasers for instrumentation and control except for medical purposes; Light emitting diode (LED); Light regulator; Load switch; Low voltage power supply; Magnetic recording media such as blank magnetic data carriers; Magnetic wire, wire identification wire, wire identification cover; Memories for apparatus for data processing; Moisture and temperature controlling system; Motor control centers; Motor protection system; Motor start cable; Motor starter; Non-illumination discharge tube; Organic light emitting diode (OLED); Outgoing feeders; Panel board; Piezoelectric sensor; Plug and energize installation systems; Potential transformer/ current transformer; Power factor corrector or compensation system; Power monitoring equipment; Power plug converter; Power socket cover; Power socket; Power station automation device; Power supply material (wire, cable); Pressure reducer; Printed circuit boards (PCB); Programmable Logic Controller (PLC) boards; Protection system for arc flash/fault; Quantum dot light emitting diode (QLED); Reclosers; Regulated power supply; Rheostat; Variable inductor; Semiconductor power elements; Semi-conductors and wafers; Sensors - electric sensors, current sensors, voltage sensors and sensors for determining acceleration, position, velocity, pressure and temperature; Solenoid valve or solenoid switch; Stage lighting regulator; Step-up transformer; Switching and distribution installations - switchboards and switch desks, cables and push buttons, components required for switchboards operation; Telephone line; Thermostat; Thyristors; Time switches excluding mechanisms used for clockwork; Transformers; Transistors; Triode; Uninterruptible power supplies (UPS); Voltage regulator; and Wire connector.
Status
2021-07-25 UTC
LIVE APPLICATION Under Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and that this application has been assigned to an examiner.
3 - AN ILLUSTRATION DRAWING WHICH INCLUDES WORD(S)/ LETTER(S)/NUMBER(S)
Mark Type
Trademark
Standard Character Claim
No
Current Location
TMO LAW OFFICE 112 - EXAMINING ATTORNEY ASSIGNED 2021-02-16
Basis
1(b)
Class Status
ACTIVE
Primary US Classes
021:
Electrical Apparatus, Machines and Supplies
023:
Cutlery, Machinery, Tools and Parts Thereof
026:
Measuring and Scientific Appliances
036:
Musical Instruments and Supplies
038:
Prints and Publications
Primary International Class
009 - Primary Class
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Benjamin B. Xue
Timeline
2020-02-27
Application Filed
2020-03-05
Location: NEW APPLICATION PROCESSING
2020-03-05
Status: Live/Pending
2020-03-05
Transaction Date
2021-02-16
Location: TMO LAW OFFICE 112 - EXAMINING ATTORNEY ASSIGNED
2021-02-16
Status: A non-final Office action has been sent (issued) to the applicant. This is a letter from the examining attorney requiring additi
BENJAMIN B. XUE XUE & ASSOCIATES, P.C. 1 SCHOOL STREET, SUITE 303A 1 SCHOOL STREET, SUITE 303 GLEN COVE, NY 11542
Good, Services, and Codes
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
DM0000
The mark consists of The mark consists of the term "EOS" appearing in a large, blocked, upper-case font. The stylized, upper case "E" is broken into 6 unequal sections by one horizontal line running through the center of the "E" and three vertical lines, each slightly to the right of the center of the "E". The three vertical lines of the "E" are all positioned at the same vertical axis creating the illusion that they are a single, continuous vertical line that disappears into the negative space of the mark. The top left and bottom right of the stylized "E" have rounded rather than sharp edges. The stylized, upper case "O" appears as a capsule shape, and lacks the empty space traditionally found in the center of a letter "O". The stylized, capsule-shaped "O" is broken into 4 equal sections by a horizontal line running through the center of the "O", and a vertical line running through the center of the "O". Other than the lines running through the "O", the stylized "O" appears as solid. The stylized, upper case "S" is broken into 6 unequal sections by one horizontal line running through the center of the "S" and three vertical lines, each running approximately through the center of the "S". The three vertical lines of the "S" are all positioned at the same vertical axis creating the illusion that they are a single, continuous vertical line that disappears into the negative space of the mark. The bottom and top "hooks" of the block letter "S" have sharp corners. The three horizontal lines running through the "E", "O", and "S" are all positioned at the same horizontal axis creating the illusion that they are a single, continuous horizontal line that disappears into the negative space of the mark.
Trademark Filing History
Description
Date
Proceeding Number
NOTIFICATION OF NON-FINAL ACTION E-MAILED
2021-02-16
6325
NON-FINAL ACTION WRITTEN
2021-02-16
94502
NON-FINAL ACTION E-MAILED
2021-02-16
6325
TEAS/EMAIL CORRESPONDENCE ENTERED
2020-11-26
88889
TEAS RESPONSE TO OFFICE ACTION RECEIVED
2020-11-25
CORRESPONDENCE RECEIVED IN LAW OFFICE
2020-11-25
88889
NOTIFICATION OF NON-FINAL ACTION E-MAILED
2020-05-26
6325
NON-FINAL ACTION WRITTEN
2020-05-26
94502
NON-FINAL ACTION E-MAILED
2020-05-26
6325
ASSIGNED TO EXAMINER
2020-05-18
94502
NOTICE OF DESIGN SEARCH CODE E-MAILED
2020-03-10
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.