Mark For: EAGLE® trademark registration is intended to cover the categories of industrial equipment for processing, defecting and dimensioning of lumber, namely, optimizing rip saws, optimizing crosscut saws, planers, sanders, lumber distressing and chatter machines, belt and chain transfer units, manufacturing lines for feeding and sizing lumber, work stations for sizing lumber and locating and removing imperfections in lumber, feeding and stacking equipment for lumber, and conveyors.
Status
2020-02-13 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Joseph A. Sebolt
Attorney Docket Number
2170008US1AT
Timeline
2004-01-31
Date of First Use
2004-01-31
Date of Use In Commerce
2020-02-10
Application Filed
2020-02-13
Location: NEW APPLICATION PROCESSING
2020-02-13
Status: Live/Pending
2020-02-13
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
JOSEPH A. SEBOLT SAND, SEBOLT & WERNOW CO., LPA 4940 MUNSON STREET, NW AEGIS TOWER, SUITE 1100 CANTON, OH 44718-3615
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
International Codes:
9
U.S. Codes:
021,023,026,036,038
International Codes:
37
U.S. Codes:
100,103,106
Type Code
Type
GS0071
Industrial equipment for processing, defecting and dimensioning of lumber, namely, optimizing rip saws, optimizing crosscut saws, planers, sanders, lumber distressing and chatter machines, belt and chain transfer units, manufacturing lines for feeding and sizing lumber, work stations for sizing lumber and locating and removing imperfections in lumber, feeding and stacking equipment for lumber, and conveyors
GS0071
Industrial equipment for processing, defecting and dimensioning of lumber, namely, rip saw machines, crosscut saw machines, electric planers, electric sanders, lumber distressing and chatter machines, belt and chain transfer units, machines for feeding and sizing lumber, machines for sizing lumber and locating and removing imperfections in lumber, feeding and stacking machines for lumber, and belt and roller conveyors
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Eagle Machinery & Supply, Inc.
Drawing
TEAS RF New Application
| 