X-PRO

Maxpro LLC

Application Filed: 2019-12-27
Trademark Application Details
Trademark Logo X-PRO

The mark consists of bold font reads "X-PRO" with an arch from the top of the "X" to the top of the "R". Around the half arch is a circle arrow that goes around the word "X-PRO" the circle begins between the R and O and ends below the R not going in front of the text. The letter X has three "wings" that extend to the left of the text and diminish in size from top to bottom.

Mark For: X-PRO® trademark registration is intended to cover the categories of electrical motor and engine parts of ATVs, motorized dirt bikes, go-karts, motorcycles, scooters, and mopeds, namely, ignition devices in the nature of capacitor discharge ignition, ignition devices in the nature of digital capacitor discharge ignition engine control unit, electric fuel pump, motor starters in the nature of electrical brushes, motor starters in the nature of electronic carbon brushes, electronic ignitions, ignition magnetos, ignition devices in the nature of ignition coil, ignition devices in the nature of magneto coil, ignition devices in the nature of magneto rotor, ignition devices in the nature of motor brush speed controller, spark plugs, starter motors, motor starter relay, starters for motors and engines, spark plug amplifier; gasoline and diesel engine parts for ATVs, motorized dirt bikes, go karts, motorcycles, scooters and mopeds, namely, air filters, anti-pollution devices for engines, belts for engines, cam shafts, carburetors, carburetor intake gasket, control cables for engines, cooling fans for motors and engines, valve covers for engines, crank shafts, engine cylinders, engine cylinder gasket, cylinder heads for engines, cylinder head cover for engines, engine gaskets in the nature of cylinder head cover sealers, cylinder piston gaskets for engines, engine cylinder sleeves, cylinders for engines, engine cam sprockets, exhaust gasket for engines, fan belts, engine fan blade wheel, engine fan cover, engine fans, engine flywheels, fuel diaphragms for engines, fuel economizers for engines, fuel petcock, gasket for engines, fuel injectors, intake manifolds, exhaust manifold for engines, intake pipe gasket for engines, joints for engines, kick starters, lubricating oil filter, lubricating pumps, magnetic oil drain plug for engines, manifold exhaust for engines, engine mufflers, oil tank plugs and caps, oil mirror for engines, oil rulers for engines, engine gaskets in the nature of an oil seal, piston ring pins, piston rings, pistons, pumps as parts of engines, radiators for engines, rocker arms for motors, sealing joints for engines, silencers for engines, chains for starting engines, engine valve springs, water pumps. [all]

Status

2020-01-04 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.


Research OneLook Acronym Finder
Serial Number88740200
Registration Number6178191
Mark Literal ElementsX-PRO
Mark Drawing Type-
Mark TypeTRADEMARK
Standard Character ClaimNo
RegisterPRINCIPAL
Current LocationNEW APPLICATION PROCESSING 2020-01-04
Basis1(a)
Class StatusACTIVE
Primary US Classes
  • 013: Hardware, Plumbing and Steamfitting Supplies
  • 019: Vehicles
  • 021: Electrical Apparatus, Machines and Supplies
  • 023: Cutlery, Machinery, Tools and Parts Thereof
  • 031: Filters and Refrigerators
  • 034: Heating, Lighting and Ventilating Apparatus
  • 035: Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
  • 007 - Primary Class
  • (Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed UseYes
Current UseYes
Intent To UseNo
Filed ITUNo
44D FiledNo
44E CurrentNo
66A CurrentNo
Current BasisNo
No BasisNo

Timeline

2019-01-10Date of First Use
2019-01-10Date of Use In Commerce
2019-12-27Application Filed
2019-12-31Location: NEW APPLICATION PROCESSING
2019-12-31Status: Live/Pending
2020-01-01Transaction Date
2020-01-04Location: NEW APPLICATION PROCESSING
2020-01-04Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
2020-10-20Trademark Registered

Trademark Parties (Applicants & Owners)

Party: Maxpro LLC
Address9448 Rush St South El Monte, CALIFORNIA UNITED STATES 91733
Legal Entity TypeLimited Liability Company
Legal Entity StateCALIFORNIA

Documents

DrawingJPEG2019-12-27
SpecimenJPEG2019-12-27
TEAS RF New ApplicationMULTI2019-12-27

Design Search Codes

031701Bird wings shown alone or as part of something other than associated animal; Wings of birds, shown alone or as part of something other than associated animal
070906Arches
241502Arrows forming any other geometric figure

Attorney of Record

MAXPRO LLC
MAXPRO LLC
9448 RUSH ST
SOUTH EL MONTE, CA 91733

Good, Services, and Codes


IC 007. US 013 019 021 023 031 034 035. G & S: Electrical motor and engine parts of ATVs, motorized dirt bikes, go-karts, motorcycles, scooters, and mopeds, namely, ignition devices in the nature of capacitor discharge ignition, ignition devices in the nature of digital capacitor discharge ignition engine control unit, electric fuel pump, motor starters in the nature of electrical brushes, motor starters in the nature of electronic carbon brushes, electronic ignitions, ignition magnetos, ignition devices in the nature of ignition coil, ignition devices in the nature of magneto coil, ignition devices in the nature of magneto rotor, ignition devices in the nature of motor brush speed controller, spark plugs, starter motors, motor starter relay, starters for motors and engines, spark plug amplifier; gasoline and diesel engine parts for ATVs, motorized dirt bikes, go karts, motorcycles, scooters and mopeds, namely, air filters, anti-pollution devices for engines, belts for engines, cam shafts, carburetors, carburetor intake gasket, control cables for engines, cooling fans for motors and engines, valve covers for engines, crank shafts, engine cylinders, engine cylinder gasket, cylinder heads for engines, cylinder head cover for engines, engine gaskets in the nature of cylinder head cover sealers, cylinder piston gaskets for engines, engine cylinder sleeves, cylinders for engines, engine cam sprockets, exhaust gasket for engines, fan belts, engine fan blade wheel, engine fan cover, engine fans, engine flywheels, fuel diaphragms for engines, fuel economizers for engines, fuel petcock, gasket for engines, fuel injectors, intake manifolds, exhaust manifold for engines, intake pipe gasket for engines, joints for engines, kick starters, lubricating oil filter, lubricating pumps, magnetic oil drain plug for engines, manifold exhaust for engines, engine mufflers, oil tank plugs and caps, oil mirror for engines, oil rulers for engines, engine gaskets in the nature of an oil seal, piston ring pins, piston rings, pistons, pumps as parts of engines, radiators for engines, rocker arms for motors, sealing joints for engines, silencers for engines, chains for starting engines, engine valve springs, water pumps. FIRST USE: 20190110. FIRST USE IN COMMERCE: 20190110
IC 009. US 021 023 026 036 038. G & S: Electrical parts for ATVs, motorized dirt bikes, go-karts, motorcycles, scooters, and mopeds, namely, battery boxes, battery chargers, battery jars, electric batteries, electric cables, electric coils, electric wires, fuse wire, fuses, grids for batteries, ignition batteries, electric switches in the nature of a kill switch, electric light switch, magnetic wires, plates for batteries, electrical signal attenuators, electrical switches, tachometers, voltage regulators for vehicles, solar power controllers, electric temperature sensors, voltage regulators, voltage regulator rectifier. FIRST USE: 20190110. FIRST USE IN COMMERCE: 20190110
IC 012. US 019 021 023 031 035 044. G & S: ATVs (all terrain vehicles) with open front seats; ATVs (all terrain vehicles) with closed front seats; motorized dirt bikes for motocross; go-karts; motorcycles; electrically-powered scooters; gas-powered scooters; self-balancing motorized scooters; mopeds; Bicycles; Tricycles; structural parts for ATVs, motorized dirt bikes, go-karts, motorcycles, scooters, and mopeds; electrical parts for ATVs, motorized dirt bikes, go-karts, motorcycles, scooters, and mopeds, namely, electric drives and wire harnesses in the nature of wires, terminals and connectors bundled together to transmit electric power and signals to electric or electronic equipment mounted on the vehicle body parts; land vehicle console parts, namely, wiring harness for control, monitoring and protection of engines for ATVs, motorized dirt bikes, go-karts, motorcycles, scooters and mopeds; brake cables, caliber brake pads, brake rotors, clutches, fork bearings and races, fork seals, front dash panels, handlebars, headlight mounts, shift levers, handle bar throttles, brake master cylinder assemblies, clutch master cylinder assemblies, master cylinders, all for ATVs, motorized dirt bikes, go karts, motorcycles, scooters and mopeds; wheels, rear wheel sprockets, wheel rims, and wheel suspensions, all for ATVs, motorized dirt bikes, go karts, motorcycles, scooters and mopeds; bodyworks for ATVs, motorized dirt bikes, go karts, motorcycles, scooters and mopeds. FIRST USE: 20190110. FIRST USE IN COMMERCE: 20190110

International Codes:7
U.S. Codes:013,019,021,023,031,034,035
International Codes:9
U.S. Codes:021,023,026,036,038
International Codes:12
U.S. Codes:019,021,023,031,035,044
Type CodeType
DM0000The mark consists of bold font reads "X-PRO" with an arch from the top of the "X" to the top of the "R". Around the half arch is a circle arrow that goes around the word "X-PRO" the circle begins between the R and O and ends below the R not going in front of the text. The letter X has three "wings" that extend to the left of the text and diminish in size from top to bottom.
CC0000Color is not claimed as a feature of the mark.

Trademark Filing History

DescriptionDateProceeding Number
NEW APPLICATION ENTERED IN TRAM2019-12-31

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed