To: | Hologic, Inc. (docketing@fisherbroyles.com) |
Subject: | U.S. Trademark Application Serial No. 88675358 - RAPIDFFN - 9095.T071US |
Sent: | December 11, 2019 01:55:15 PM |
Sent As: | ecom101@uspto.gov |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 Attachment - 11 Attachment - 12 Attachment - 13 Attachment - 14 Attachment - 15 Attachment - 16 Attachment - 17 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88675358
Mark: RAPIDFFN
|
|
Correspondence Address:
|
|
Applicant: Hologic, Inc.
|
|
Reference/Docket No. 9095.T071US
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: December 11, 2019
Search for Conflicting Marks
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
Summary of Issues
SUMMARY OF ISSUES:
Refusal -- Section 2(e)(1) -- Mark is Merely Descriptive
A mark is merely descriptive if it describes an ingredient, quality, characteristic, function, feature, purpose, or use of an applicant’s goods and/or services. TMEP §1209.01(b); see, e.g., In re TriVita, Inc., 783 F.3d 872, 874, 114 USPQ2d 1574, 1575 (Fed. Cir. 2015) (quoting In re Oppedahl & Larson LLP, 373 F.3d 1171, 1173, 71 USPQ2d 1370, 1371 (Fed. Cir. 2004)); In re Steelbuilding.com, 415 F.3d 1293, 1297, 75 USPQ2d 1420, 1421 (Fed. Cir. 2005) (citing Estate of P.D. Beckwith, Inc. v. Comm’r of Patents, 252 U.S. 538, 543 (1920)).
The determination of whether a mark is merely descriptive is made in relation to an applicant’s goods and/or services, not in the abstract. DuoProSS Meditech Corp. v. Inviro Med. Devices, Ltd., 695 F.3d 1247, 1254, 103 USPQ2d 1753, 1757 (Fed. Cir. 2012); In re The Chamber of Commerce of the U.S., 675 F.3d 1297, 1300, 102 USPQ2d 1217, 1219 (Fed. Cir. 2012); TMEP §1209.01(b); see, e.g., In re Polo Int’l Inc., 51 USPQ2d 1061, 1062-63 (TTAB 1999) (finding DOC in DOC-CONTROL would refer to the “documents” managed by applicant’s software rather than the term “doctor” shown in a dictionary definition); In re Digital Research Inc., 4 USPQ2d 1242, 1243-44 (TTAB 1987) (finding CONCURRENT PC-DOS and CONCURRENT DOS merely descriptive of “computer programs recorded on disk” where the relevant trade used the denomination “concurrent” as a descriptor of a particular type of operating system).
“Whether consumers could guess what the product [or service] is from consideration of the mark alone is not the test.” In re Am. Greetings Corp., 226 USPQ 365, 366 (TTAB 1985).
The applicant seeks registration for RAPIDFFN in stylized letters for “Diagnostic preparations and reagents for clinical or medical laboratory use; medical diagnostic reagents,” in International Class 5.
Generally, if the individual components of a mark retain their descriptive meaning in relation to the goods and/or services, the combination results in a composite mark that is itself descriptive and not registrable. In re Fat Boys Water Sports LLC, 118 USPQ2d 1511, 1516 (TTAB 2016) (citing In re Tower Tech, Inc., 64 USPQ2d 1314, 1317-18 (TTAB (2002)); TMEP §1209.03(d); see, e.g., Apollo Med. Extrusion Techs., Inc. v. Med. Extrusion Techs., Inc., 123 USPQ2d 1844, 1851 (TTAB 2017) (holding MEDICAL EXTRUSION TECHNOLOGIES merely descriptive of medical extrusion goods produced by employing medical extrusion technologies); In re Cannon Safe, Inc., 116 USPQ2d 1348, 1351 (TTAB 2015) (holding SMART SERIES merely descriptive of metal gun safes); In re Tower Tech, Inc., 64 USPQ2d 1314, 1317-18 (TTAB 2002) (holding SMARTTOWER merely descriptive of “commercial and industrial cooling towers and accessories therefor, sold as a unit”). Only where the combination of descriptive terms creates a unitary mark with a unique, incongruous, or otherwise nondescriptive meaning in relation to the goods and/or services is the combined mark registrable. See In re Colonial Stores, Inc., 394 F.2d 549, 551, 157 USPQ 382, 384 (C.C.P.A. 1968); In re Positec Grp. Ltd., 108 USPQ2d 1161, 1162-63 (TTAB 2013). In this case, both the individual components and the composite result are descriptive of applicant’s goods and/or services and do not create a unique, incongruous, or nondescriptive meaning in relation to the goods and/or services.
The mark consists of the terms RAPID and FFN combined into a single term. The term RAPID is defined in part as “moving, acting, or occurring with great speed.” See attached dictionary definition from The American Heritage Dictionary at http://www.ahdictionary.com/word/search.html?q=rapid. Additional supporting definitions are also attached hereto.
The term FFN is an initialism for “fetal fibronectin. See attached definition from Medicinenet at http://www.medicinenet.com/script/main/art.asp?articlekey=23861. The term is defined as a protein produced during pregnancy and is the basis for medical testing. This is also evidenced by the attached.
Combined into a single term, the impression of the mark in connection with the identified goods is a fast or rapid test of fetal fibronectin. This is supported by the attached internet websites obtained from a Google® search, including portion of applicant’s website.
Therefore, the evidence establishes that each component term in the mark is descriptive, and when combined no incongruity or non-descriptive meaning results. Rather, the meaning of the mark in connection with the identified goods is clear and direct, and no multi-stage reasoning process is required.
For these reasons, registration is refused under §2(e)(1) of the Trademark Act.
Acquired Distinctiveness
Applicant may amend the application to assert a claim of acquired distinctiveness under Trademark Act Section 2(f) based on ownership of active U.S. Registration No(s). 3781153. See 15 U.S.C. §1052(f); TMEP §§1212.04 et seq. To do so, applicant must request that the application be amended to assert a claim of acquired distinctiveness under Section 2(f) and submit the following statement, if accurate:
The mark has become distinctive of the goods and/or services as evidenced by the ownership of active U.S. Registration No(s). 3781153 on the Principal Register for the same mark for sufficiently similar goods and/or services.
TMEP §1212.04(e); see 37 C.F.R. §2.41(a)(1).
Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.
Requirement -- Identification of Goods
Applicant may substitute the following wording, if accurate:
“diagnostic preparations for clinical and medical laboratory use; diagnostic reagents for clinical or medical laboratory use,” in International Class 1;
“clinical medical reagents; medical diagnostic reagents,” in International Class 5.
Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended. See 37 C.F.R. §2.71(a); TMEP §1402.06. Generally, any deleted goods and/or services may not later be reinserted. See TMEP §1402.07(e). For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.
Therefore, applicant must either (1) restrict the application to the number of classes covered by the fees already paid, or (2) submit the fees for each additional class.
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.
(2) Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule). The application identifies goods and/or services that are classified in at least 2 classes; however, applicant submitted a fee(s) sufficient for only 1 class. Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.
See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).
See an overview of the requirements for a Section 1(b) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
How to respond. Click to file a response to this nonfinal Office action.
/Michael P. Keating/
Trademark Attorney
Law Office 101
(571) 272-9177
Michael.Keating@uspto.gov (informal inquiries only)
RESPONSE GUIDANCE