The mark consists of as shown in the accompanying drawing, a two-dimensional view of a three-dimensional shape of a drill guide in the form of a T configuration, the T having a lower base length, an upper base length positioned in parallel to the lower base length and a perpendicular length crossing both the lower based length and the upper base length. The lower base length includes three substantially rectangular shaped additions each of which are attached to the base length with a fastener. Two of the rectangular shaped additions include apertures. The upper base length includes two protruding segments and a fastener attached to the right side. The broken lines shown in the shadowed areas of the drawing are intended only to show the position of the mark and are not claimed as a feature of the mark.
Mark For: USA™ trademark registration is intended to cover the categories of bits for hand drills; Hand tools, namely, jigs; Hand tools, namely, cabinet hardware jigs, cabinet light Jigs,and cabinet hinge jigs. [all]
>Color is not claimed as a feature of the mark. The mark consists of as shown in the accompanying drawing, a two-dimensional view of a three-dimensional shape of a drill guide in the form of a T configuration, the T having a lower base length, an upper base length positioned in parallel to the lower base length and a perpendicular length crossing both the lower based length and the upper base length. The lower base length includes three substantially rectangular shaped additions each of which are attached to the base length with a fastener. Two of the rectangular shaped additions include apertures. The upper base length includes two protruding segments and a fastener attached to the right side. The broken lines shown in the shadowed areas of the drawing are intended only to show the position of the mark and are not claimed as a feature of the mark.
Status
2020-02-10 UTC
LIVE APPLICATION Under Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and that this application has been assigned to an examiner.
Rulers; Surveyor's tapes or chains; Tapes, measuring; Yard sticks
170702
Abacuses; Slide rules, abacuses and the like
240905
American flags; Flags, American
Attorney of Record
MICHAEL P EDDY LAW OFFICE OF MICHAEL P. EDDY 12526 HIGH BLUFF DRIVE, SUITE 300 SAN DIEGO, CA 92014
Good, Services, and Codes
IC 008. US 023 028 044. G & S: Bits for hand drills; Hand tools, namely, jigs; Hand tools, namely, cabinet hardware jigs, cabinet light Jigs,and cabinet hinge jigs. FIRST USE: 19970616. FIRST USE IN COMMERCE: 19970616
International Codes:
8
U.S. Codes:
023,028,044
Type Code
Type
CC0000
Color is not claimed as a feature of the mark.
Trademark Filing History
Description
Date
Proceeding Number
NOTIFICATION OF NON-FINAL ACTION E-MAILED
2019-12-13
6325
NON-FINAL ACTION WRITTEN
2019-12-13
88570
NON-FINAL ACTION E-MAILED
2019-12-13
6325
ASSIGNED TO EXAMINER
2019-12-04
88570
NOTICE OF DESIGN SEARCH CODE E-MAILED
2019-09-13
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.