Mark For: INTEGRA™ trademark registration is intended to cover the categories of fasteners of plastic, other than for use in building materials; plastic clips, other than for use in building materials; retainers, other than for use in building materials; carpet retainers, door trim fasteners, trim component fasteners, inner fender fasteners, door trim pad fasteners, door trim panel fasteners, interior trim panel fasteners, exterior trim molding fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; electrical connector plastic fasteners, other than for use in building materials; bus bars made partially of plastics, other than for use in building materials; push buttons made of plastic, other than for use in building materials; straps, tie straps, straps for attaching to a hole, straps for attaching to a stud, straps to secure a wire bundle, wire bundle clips, wire routing clips, tube routing clips, hose routing clips, routing clips, vibration damping routing clips, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; bumper spacers made of plastics or partially of plastics, other than for use in building materials; collars of plastic for fastening pipes, other than for use in building materials; pins of plastic, other than for use in building materials; grommets, grommet fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; fasteners of plastic for automotive assembly; plastic clips for automotive assembly; retainers made of plastics or partially of plastics for automotive parts; glove box door fasteners; electrical connector plastic fasteners for automotive assembly; bus bars made partially of plastics for automotive assembly; push buttons made of plastic for automotive assembly; straps for automotive assembly; collars of plastic for fastening pipes for automotive assembly; pins of plastic for automotive assembly; grommet fasteners for automotive assembly made of plastics or partially of plastics; fitting parts made of plastics or partially of plastics for automotive assembly; sealing plugs for automotive assembly; all the aforesaid goods excluding hanging supports for domestic curtains, especially curtain rods, curtain rails, curtain holders, holders for curtain rods, curtain ring, cable tension regulators for curtains; None of the aforesaid for use in relation to, or including, domestic window covers, domestic window covering products, domestic curtain rails, domestic curtain runners or domestic curtain fittings. [all]
Status
2020-04-12 UTC
DEAD APPLICATION Refused Dismissed or Invalidated
This trademark application was refused, dismissed, or invalidated by the Office and this application is no longer active.
TMO LAW OFFICE 122 - EXAMINING ATTORNEY ASSIGNED 2020-03-30
Basis
44(e)
Class Status
ACTIVE
Primary US Classes
002:
Receptacles
013:
Hardware, Plumbing and Steamfitting Supplies
022:
Games, Toys and Sporting Good
025:
Locks and Safes
032:
Furniture and Upholstery
050:
Merchandise Not Otherwise Classified
Primary International Class
020 - Primary Class
(Furniture and articles not otherwise classified) Furniture, mirrors, picture frames; goods (not included in other classes) of wood, cork, reed, cane, wicker, horn, bone, ivory, whalebone, shell, amber, mother-of-pearl, meerschaum and substitutes for all these materials, or of plastics.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Michael P. Leary
Attorney Docket Number
MPL/SEF/Inte
Law Office Assigned
N40
Employee Name
CALLOWAY, CHRISTINA DE
Timeline
2019-05-16
Trademark Registered
2019-06-12
Application Filed
2019-09-16
Location: TMO LAW OFFICE 122 - EXAMINING ATTORNEY ASSIGNED
2019-09-16
Status: Live/Pending
2019-09-16
Transaction Date
2020-03-30
Location: TMO LAW OFFICE 122 - EXAMINING ATTORNEY ASSIGNED
2020-03-30
Status: Abandoned because the applicant failed to respond or filed a late response to an Office action. To view all documents in this fi
MICHAEL P. LEARY STANLEY BLACK & DECKER, INC. 6201 GREENLEIGH AVENUE PATENT DEPT/MR-045 MIDDLE RIVER, MD 21220
Good, Services, and Codes
(ABANDONED) IC 020. US 002 013 022 025 032 050. G & S: Fasteners of plastic, other than for use in building materials; plastic clips, other than for use in building materials; retainers, other than for use in building materials; carpet retainers, door trim fasteners, trim component fasteners, inner fender fasteners, door trim pad fasteners, door trim panel fasteners, interior trim panel fasteners, exterior trim molding fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; electrical connector plastic fasteners, other than for use in building materials; bus bars made partially of plastics, other than for use in building materials; push buttons made of plastic, other than for use in building materials; straps, tie straps, straps for attaching to a hole, straps for attaching to a stud, straps to secure a wire bundle, wire bundle clips, wire routing clips, tube routing clips, hose routing clips, routing clips, vibration damping routing clips, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; bumper spacers made of plastics or partially of plastics, other than for use in building materials; collars of plastic for fastening pipes, other than for use in building materials; pins of plastic, other than for use in building materials; grommets, grommet fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; fasteners of plastic for automotive assembly; plastic clips for automotive assembly; retainers made of plastics or partially of plastics for automotive parts; glove box door fasteners; electrical connector plastic fasteners for automotive assembly; bus bars made partially of plastics for automotive assembly; push buttons made of plastic for automotive assembly; straps for automotive assembly; collars of plastic for fastening pipes for automotive assembly; pins of plastic for automotive assembly; grommet fasteners for automotive assembly made of plastics or partially of plastics; fitting parts made of plastics or partially of plastics for automotive assembly; sealing plugs for automotive assembly; all the aforesaid goods excluding hanging supports for domestic curtains, especially curtain rods, curtain rails, curtain holders, holders for curtain rods, curtain ring, cable tension regulators for curtains; None of the aforesaid for use in relation to, or including, domestic window covers, domestic window covering products, domestic curtain rails, domestic curtain runners or domestic curtain fittings
International Codes:
20
U.S. Codes:
002,013,022,025,032,050
Type Code
Type
GS0201
Fasteners of plastic, other than for use in building materials; plastic clips, other than for use in building materials; retainers, other than for use in building materials; carpet retainers, door trim fasteners, trim component fasteners, inner fender fasteners, door trim pad fasteners, door trim panel fasteners, interior trim panel fasteners, exterior trim molding fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; electrical connector plastic fasteners, other than for use in building materials; bus bars made partially of plastics, other than for use in building materials; push buttons made of plastic, other than for use in building materials; straps, tie straps, straps for attaching to a hole, straps for attaching to a stud, straps to secure a wire bundle, wire bundle clips, wire routing clips, tube routing clips, hose routing clips, routing clips, vibration damping routing clips, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; bumper spacers made of plastics or partially of plastics, other than for use in building materials; collars of plastic for fastening pipes, other than for use in building materials; pins of plastic, other than for use in building materials; grommets, grommet fasteners, all the aforesaid goods made of plastics or partially of plastics, none of the aforesaid goods for use in building materials; fasteners of plastic for automotive assembly; plastic clips for automotive assembly; retainers made of plastics or partially of plastics for automotive parts; glove box door fasteners; electrical connector plastic fasteners for automotive assembly; bus bars made partially of plastics for automotive assembly; push buttons made of plastic for automotive assembly; straps for automotive assembly; collars of plastic for fastening pipes for automotive assembly; pins of plastic for automotive assembly; grommet fasteners for automotive assembly made of plastics or partially of plastics; fitting parts made of plastics or partially of plastics for automotive assembly; sealing plugs for automotive assembly; all the aforesaid goods excluding hanging supports for domestic curtains, especially curtain rods, curtain rails, curtain holders, holders for curtain rods, curtain ring, cable tension regulators for curtains; None of the aforesaid for use in relation to, or including, domestic window covers, domestic window covering products, domestic curtain rails, domestic curtain runners or domestic curtain fittings
Trademark Filing History
Description
Date
Proceeding Number
ABANDONMENT NOTICE E-MAILED - FAILURE TO RESPOND
2020-03-30
ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE
2020-03-30
NOTIFICATION OF NON-FINAL ACTION E-MAILED
2019-09-16
6325
NON-FINAL ACTION WRITTEN
2019-09-16
93048
NON-FINAL ACTION E-MAILED
2019-09-16
6325
ASSIGNED TO EXAMINER
2019-09-04
93048
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.