To: | Quick Tie Products, Inc. (Stephen.kelly@hwhlaw.com) |
Subject: | U.S. Trademark Application Serial No. 88464610 - SPARTAN - 15861.019 |
Sent: | September 04, 2019 11:28:23 AM |
Sent As: | ecom119@uspto.gov |
Attachments: | Attachment - 1 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88464610
Mark: SPARTAN
|
|
Correspondence Address: 101 E KENNEDY BLVD, SUITE 3700
|
|
Applicant: Quick Tie Products, Inc.
|
|
Reference/Docket No. 15861.019
Correspondence Email Address: |
|
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: September 04, 2019
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 755792. Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq. See the attached registration.
In this case, the applicant’s mark is “SPARTAN” in standard characters for “Metal hardware for sill plate anchor assemblies.” The registrant’s mark is “SPARTAN” in standard characters for “Door, Window and Transom Hardware; Builders' Hardware; Furniture Hardware; Showcase Hardware; Cabinet Hardware and Plumbers' Hardware, Consisting of Shower Heads and Associated Fittings Therefor.”
Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods of the parties. See 15 U.S.C. §1052(d). Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”). In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017). Only those factors that are “relevant and of record” need be considered. M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018).
Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis: (1) the similarities between the compared marks and (2) the relatedness of the compared goods. See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.
Marks are Similar
In the present case, applicant’s mark is SPARTAN and registrant’s mark is SPARTAN. These marks are identical in appearance, sound, and meaning, “and have the potential to be used . . . in exactly the same manner.” In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017). Additionally, because they are identical, these marks are likely to engender the same connotation and overall commercial impression when considered in connection with applicant’s and registrant’s respective goods. Id.
Therefore, the marks are confusingly similar.
Goods are Related
In this case, the registration uses broad wording to describe its hardware, which presumably encompasses all goods of the type described, including applicant’s more narrow hardware for sill plate anchor assemblies. See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015). Thus, applicant’s and registrant’s goods are legally identical. See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v.Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).
Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Thus, applicant’s and registrant’s goods are related.
Accordingly, because confusion as to source is likely, registration is refused under Trademark Act. Section 2(d) based upon a likelihood of confusion.
The overriding concern is not only to prevent buyer confusion as to the source of the goods, but to protect the registrant from adverse commercial impact due to use of a similar mark by a newcomer. See In re Shell Oil Co., 992 F.2d 1204, 1208, 26 USPQ2d 1687, 1690 (Fed. Cir. 1993). Therefore, any doubt regarding a likelihood of confusion determination is resolved in favor of the registrant. TMEP §1207.01(d)(i); see Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1265, 62 USPQ2d 1001, 1003 (Fed. Cir. 2002); In re Hyper Shoppes (Ohio), Inc., 837 F.2d 463, 464-65, 6 USPQ2d 1025, 1026 (Fed. Cir. 1988).
Applicant may substitute the following wording, if accurate: “metal hardware for sill plate anchor assemblies, namely, [identify specific goods, e.g., nuts, bolts, screws].”
The Trademark Act requires that a trademark or service mark application must include a “specification of … the goods [or services]” in connection with which the mark is being used or will be used. 15 U.S.C. §1051(a)(2) (emphasis added), (b)(2) (emphasis added); see 15 U.S.C. §1053. Specifically, a complete application must include a “list of the particular goods or services on or in connection with which the applicant uses or intends to use the mark.” 37 C.F.R. §2.32(a)(6) (emphasis added). This requirement for a specification of the particular goods applies to applications filed under all statutory bases. See 15 U.S.C. §§1051(a)(2), 1051(b)(2), 1053, 1126(d)-(e), 1141f; 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.01(b)-(c).
For assistance with identifying and classifying goods in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
How to respond. Click to file a response to this nonfinal Office action
Jill Prater
/Jill I. Prater/
Trademark Examining Attorney
Law Office 119
(571) 272-8257
jill.prater1@uspto.gov
RESPONSE GUIDANCE