To: | Sony Corporation (bhipdocket@bakerlaw.com) |
Subject: | U.S. TRADEMARK APPLICATION NO. 88392095 - ACOUSTIC MULTI-AUDIO - 41279.3171 |
Sent: | 6/19/2019 5:00:48 PM |
Sent As: | ECOM106@USPTO.GOV |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 88392095
MARK: ACOUSTIC MULTI-AUDIO
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Sony Corporation
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW. A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.
ISSUE/MAILING DATE: 6/19/2019
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
Summary of Issues that Applicant Must Address
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
Applicant must provide a disclaimer of the unregistrable part(s) of the applied-for mark even though the mark as a whole appears to be registrable. See 15 U.S.C. §1056(a); TMEP §§1213, 1213.03(a). A disclaimer of an unregistrable part of a mark will not affect the mark’s appearance. See Schwarzkopf v. John H. Breck, Inc., 340 F.2d 978, 979-80, 144 USPQ 433, 433 (C.C.P.A. 1965).
In this case, applicant must disclaim the wording “ACOUSTIC” because it is not inherently distinctive. These unregistrable term(s) at best are merely descriptive of an ingredient, quality, characteristic, function, feature, purpose, or use of applicant’s goods and/or services. See 15 U.S.C. §1052(e)(1); DuoProSS Meditech Corp. v. Inviro Med. Devices, Ltd., 695 F.3d 1247, 1251, 103 USPQ2d 1753, 1755 (Fed. Cir. 2012); TMEP §§1213, 1213.03(a).
The attached evidence from an online dictionary shows this wording means relating to sound and the way people hear things. Thus, the wording merely describes applicant’s goods because it identifies a purpose and feature of the goods, namely, relating to sound.
Applicant may respond to this issue by submitting a disclaimer in the following format:
No claim is made to the exclusive right to use “ACOUSTIC” apart from the mark as shown.
For an overview of disclaimers and instructions on how to satisfy this issue using the Trademark Electronic Application System (TEAS), see the Disclaimer webpage.
Identification of Goods
The current wording used to describe the goods needs clarification because it is indefinite and unclear as to the nature of applicant’s goods, as indicated below in the suggested identification of goods. Applicant must amend the identification of goods to specify the common commercial or generic name for the goods, as appropriate and as indicated below in the suggested identification of goods. If there is no common commercial or generic name for the product, then applicant must describe the product or service and intended consumer as well as its main purpose and intended uses. TMEP §1402.01. Moreover, the identification of goods must be specific and all-inclusive. The examining attorney has indicated below using “{ }” where the applicant must be specific. In many instances, applicant should amend the identification to incorporate the wording "namely." Applicant may adopt the following identification, if accurate:
INT. CLASS 009: Blueprinting machines; photo-copying machines; photographic machines and apparatus, namely, {specify, e.g., photographic cameras}; cinematographic machines and apparatus; optical machines and apparatus, namely, {provide a common commercial name or a description and purpose in this class, e.g., blank optical discs, optical receivers}; measuring and testing machines and instruments for {specify what is being measured and tested, e.g., measuring the temperature; testing metal strength}; batteries and dry cells; electric wires and cables; television receivers, television sets; loudspeakers; audio speakers for home theaters; audio interfaces; digital sound processors; telecommunication machines and apparatus, namely, {provide a common commercial name or a description and purpose in this class, e.g., telephones, telecommunication cables}; smartphones; personal digital assistants in the shape of a watch; computers; recorded and downloadable computer software for {specify function, e.g., downloading and organizing music files, authenticating user identification, etc., and indicate the content or field of use, if the goods are content- or field-specific, e.g., for the field of banking}; computer programs, recorded, for {specify the function of the programs, e.g., use in database management, use in electronic storage of data, etc.}; electronic machines, apparatus, namely, {provide a common commercial name or a description and purpose in this class, e.g., electronic machines for reading credit cards and recording financial operations} and parts therefor; recorded game programs for use with home video game machines; electronic circuits and CD-ROMs recorded with game programs for hand-held games with liquid crystal displays; metronomes; electronic circuits and CD-ROMs recorded with automatic performance programs for electronic musical instruments; phonograph records featuring {indicate subject matter}; downloadable music files; downloadable image files in the field of {specify}; pre-recorded video discs and video tapes featuring {indicate subject matter}; electronic publications in the nature of {indicate specific nature of publication} in the field of {indicate subject matter of publication}; exposed cinematographic films; exposed slide films; slide film mounts
For assistance with identifying and classifying goods and/or services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.
An applicant may amend an identification of goods and services only to clarify or limit the goods and services; adding to or broadening the scope of the goods and/or services is not permitted. 37 C.F.R. §2.71(a); see TMEP §§1402.06 et seq., 1402.07 et seq.
Certificate of Foreign Registration
The application specifies both an intent to use basis under Trademark Act Section 1(b) and a claim of priority under Section 44(d) based on a foreign application. See 15 U.S.C. §§1051(b), 1126(d); 37 C.F.R. §2.34(a)(2), (a)(4). However, no copy of a foreign registration has been provided even though the application indicates applicant’s intent to rely on Section 44(e) as an additional basis for registration. See 15 U.S.C. §1126(e).
An application with a Section 44(e) basis must include a true copy, photocopy, certification, or certified copy of a foreign registration from an applicant’s country of origin. 15 U.S.C. §1126(e); 37 C.F.R. §2.34(a)(3)(ii); TMEP §§1004, 1004.01, 1016. In addition, an applicant’s country of origin must be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law. 15 U.S.C. §1126(b); TMEP §§1002.01, 1004.
Therefore, applicant must provide a copy of the foreign registration from applicant’s country of origin when it becomes available. TMEP §1003.04(a). A copy of a foreign registration must consist of a document issued to an applicant by, or certified by, the intellectual property office in applicant’s country of origin. TMEP §1004.01. If applicant’s country of origin does not issue registrations or Madrid Protocol certificates of extension of protection, applicant may submit a copy of the Madrid Protocol international registration that shows that protection of the international registration has been extended to applicant’s country of origin. TMEP §1016. In addition, applicant must also provide an English translation if the foreign registration is not written in English. 37 C.F.R. §2.34(a)(3)(ii); TMEP §1004.01(a)-(b). The translation should be signed by the translator. TMEP §1004.01(b).
If the foreign registration has not yet issued, or applicant requires additional time to procure a copy of the foreign registration (and English translation, as appropriate), applicant should so inform the trademark examining attorney and request that the U.S. application be suspended until a copy of the foreign registration is available. TMEP §§716.02(b), 1003.04(b).
If applicant cannot satisfy the requirements of a Section 44(e) basis, applicant may request that the mark be approved for publication based solely on the Section 1(b) basis. See 15 U.S.C. §§1051(b), 1126(e); 37 C.F.R. §2.35(b)(1); TMEP §§806.02(f), 806.04(b), 1003.04(b). Although the mark may be approved for publication on the Section 1(b) basis, it will not register until an acceptable allegation of use has been filed. See 15 U.S.C. §1051(c)-(d); 37 C.F.R. §§2.76, 2.88; TMEP §1103. Please note that, if the U.S. application satisfied the requirements of Section 44(d) as of the U.S. application filing date, applicant may retain the priority filing date under Section 44(d) without perfecting the Section 44(e) basis, provided there is a continuing valid basis for registration. See 37 C.F.R. §2.35(b)(3)-(4); TMEP §§806.02(f), 806.04(b).
Alternatively, applicant has the option to amend the application to rely solely on the Section 44(e) basis and request deletion of the Section 1(b) basis. See 37 C.F.R. §2.35(b)(1); TMEP §806.04. The foreign registration alone may serve as the basis for obtaining a U.S. registration. See 37 C.F.R. §2.34(a)(3); TMEP §806.01(d).
Responses
If applicant has questions about its application or needs assistance in responding to this Office action, please email the assigned trademark examining attorney directly at the address below.
There is no required format or form for responding to an Office action. The Office recommends applicants use the Trademark Electronic Application System (TEAS) to respond to Office actions online at http://www.gov.uspto.report/teas/index.html. However, if applicant responds on paper via regular mail, the response should include the title “Response to Office Action” and the following information: (1) the name and law office number of the examining attorney, (2) the serial number and filing date of the application, (3) the mailing date of this Office action, (4) applicant’s name, address, telephone number and e-mail address (if applicable), and (5) the mark. 37 C.F.R. §2.194(b)(1); TMEP §302.03(a).
The response should address each refusal and/or requirement raised in the Office action. If a refusal has issued, applicant can argue against the refusal; i.e., applicant can submit arguments and evidence as to why the refusal should be withdrawn and the mark should register. To respond to requirements, applicant should set forth in writing the required changes or statements and request that the Office enter them into the application record.
The response must be personally signed or the electronic signature manually entered by applicant or someone with legal authority to bind applicant (i.e., a corporate officer of a corporate applicant, the equivalent of an officer for unincorporated organizations or limited liability company applicants, a general partner of a partnership applicant, each applicant for applications with multiple individual applicants). TMEP §§605.02, 712.
PLEASE NOTE: Because it delays processing, submission of duplicate papers is
discouraged. Unless specifically requested to do so by the Office, parties should not mail
follow up copies of documents transmitted electronically or by fax. TMEP 306.04
In spring 2019, the USPTO is likely to issue proposed changes to the federal trademark regulations to require trademark applicants, registrants, and parties to Trademark Trial and Appeal Board proceedings who are foreign-domiciled (have a permanent legal residence or a principal place of business outside of the United States), including Canadian filers, to have an attorney who is licensed to practice law in the United States represent them at the USPTO.
In addition, U.S.-licensed attorneys representing a trademark applicant, registrant, or party will generally be required to provide their bar membership information, a statement attesting to their good standing in that bar, and their postal/email addresses in trademark-related submissions. All U.S.-licensed attorneys who practice before the USPTO are subject to the rules in 37 C.F.R. Part 11 governing representation of others, including the USPTO’s Rules of Professional Conduct.
These changes are being made to increase customer compliance with federal trademark law, improve the accuracy of trademark submissions to the USPTO, and safeguard the integrity of the U.S. trademark register. See the U.S. Counsel Rule change webpage for more information.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
/Bernice Middleton/
Bernice Middleton
Trademark Examining Attorney
Law Office 106
Bernice.Middleton@uspto.gov
(571) 270.1514
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.