Offc Action Outgoing

APDIS

NIKON CORPORATION

U.S. TRADEMARK APPLICATION NO. 88292370 - APDIS - NIKN 1902115

To: NIKON CORPORATION (KLim-Docket@fzlz.com)
Subject: U.S. TRADEMARK APPLICATION NO. 88292370 - APDIS - NIKN 1902115
Sent: 4/29/2019 1:50:33 PM
Sent As: ECOM103@USPTO.GOV
Attachments:

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

U.S. APPLICATION SERIAL NO.  88292370

 

MARK: APDIS

 

 

        

*88292370*

CORRESPONDENT ADDRESS:

       KAREN LIM

       FROSS ZELNICK LEHRMAN & ZISSU, P.C.

       4 TIMES SQUARE, 17TH FLOOR

       NEW YORK, NY 10036

       

 

CLICK HERE TO RESPOND TO THIS LETTER:

http://www.gov.uspto.report/trademarks/teas/response_forms.jsp

 

VIEW YOUR APPLICATION FILE

 

APPLICANT: NIKON CORPORATION

 

 

 

CORRESPONDENT’S REFERENCE/DOCKET NO:  

       NIKN 1902115

CORRESPONDENT E-MAIL ADDRESS: 

       KLim-Docket@fzlz.com

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 4/29/2019

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SEARCH OF OFFICE’S DATABASE OF MARKS

 

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).

 

SUMMARY OF ISSUES:

  • Identification of Goods—Amendment Required
  • Foreign Registration Certificate Required

 

IDENTIFICATION OF GOODS—AMENDMENT REQUIRED

 

The identification of goods is indefinite and must be clarified for the reasons set forth below.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01. 

 

The wording "Non-contact 3D measuring instruments," "three dimensional measuring apparatus, "precision measuring apparatus," "measuring apparatus," " measuring instruments," "electric measuring apparatus and instruments," " electric measuring apparatus and instruments" is unacceptable as indefinite because applicant must specify what the goods measure, or otherwise specify their uses or common commercial names.  See id.  See suggested amendment below.   

 

The wording "detectors" is unacceptable as indefinite because applicant must specify what the goods are designed to detect, e.g. smoke detectors, metal detectors, motion detectors, etc.  See id.  See suggested amendment below.   

 

The wording "levelling instruments" is unacceptable as indefinite because applicant must further specify the use of the goods or clarify the wording by specifying the goods by their common commercial name(s).  See id.  See suggested amendment below.   

 

The wording "software; software for non-contact 3D measuring instruments; computer software for 3D measuring apparatus; software for GPS navigation systems; computer programs, downloadable; computer software applications, downloadable; mobile software applications, downloadable; computer software for processing digital images; computer software for computer-aided design; operating system programs" is unacceptable as indefinite because applicant must clarify that the goods are downloadable or recorded, and also specify the function and/or field of use of the software.  If the software is online non-downloadable software provided via a service, applicant must so specify and also reclassify the software to Class 042.  See id.  See suggested amendment below.   

 

SUGGESTED AMENDMENTS

 

Applicant may adopt the following identification, if accurate:

 

Class 009

 

Non-contact 3D measuring instruments for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; three dimensional measuring apparatus for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; {indicate what goods are designed to detect}_____________detectors; precision measuring apparatus for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; lasers for measuring; laser measuring systems; measuring apparatus for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; measuring instruments for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; electric measuring apparatus and instruments for measuring____________{indicate what is measured, e.g., length, width, height, depth, etc.}; levelling instruments, namely_______________{further specify the use or provide common commercial name, e.g., level measuring machines, level indicators, etc}; coordinate measuring instruments; optical sensors; {specify downloadable or recorded} software for_____________{specify function and/or field of use}; {specify downloadable or recorded} software for non-contact 3D measuring instruments; {specify downloadable or recorded}computer software for 3D measuring apparatus; {specify downloadable or recorded} software for GPS navigation systems; computer programs, downloadable, for_______________{specify function and/or field of use}; computer software applications, downloadable for_______________{specify function and/or field of use}; mobile software applications, downloadable for_______________{specify function and/or field of use}; {specify downloadable or recorded} computer software for processing digital images; {specify downloadable or recorded} computer software for computer-aided design; {specify downloadable or recorded} operating system programs; scanners; 3D scanners; radar apparatus; radar detectors; GPS navigation device; optical lenses; microscopes

 

Class 042 (added class)

 

Online non-downloadable software for______________{specify function and/or field of use}; Online non-downloadable software for non-contact 3D measuring instruments; Online non-downloadable computer software for 3D measuring apparatus; Online non-downloadable software for GPS navigation systems; Online non-downloadable computer software for processing digital images; Online non-downloadable computer software for computer-aided design

 

If applicant adopts the suggested amendment of the goods, then applicant must amend the classification to International Classes 009 and 042.  See 37 C.F.R. §§2.32(a)(7), 2.85; TMEP §§805, 1401.

 

Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).  Additionally, for U.S. applications filed under Trademark Act Section 44(e), the scope of the identification for purposes of permissible amendments may not exceed the scope of the goods and/or services identified in the foreign registration.  37 C.F.R. §2.32(a)(6); Marmark, Ltd. v. Nutrexpa, S.A., 12 USPQ2d 1843, 1845 (TTAB 1989) (citing In re Löwenbräu München, 175 USPQ 178, 181 (TTAB 1972)); TMEP §§1012, 1402.01(b).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MULTIPLE-CLASS APPLICATION REQUIREMENTS

 

The application identifies goods and/or services in more than one international class; therefore, applicant must satisfy all the requirements below for each international class based on Trademark Act Sections 1(b) and 44:

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  The application identifies goods and/or services that are classified in at least two classes; however, applicant submitted a fee(s) sufficient for only one class.  Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.

 

See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).

 

See an overview of the requirements for a Sections 1(b) and 44 multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

FOREIGN REGISTRATION CERTIFICATE REQUIRED

 

The application specifies both an intent to use basis under Trademark Act Section 1(b) and a claim of priority under Section 44(d) based on a foreign application.  See 15 U.S.C. §§1051(b), 1126(d); 37 C.F.R. §2.34(a)(2), (a)(4).  However, no copy of a foreign registration has been provided even though the application indicates applicant’s intent to rely on Section 44(e) as an additional basis for registration.  See 15 U.S.C. §1126(e).

 

An application with a Section 44(e) basis must include a true copy, photocopy, certification, or certified copy of a foreign registration from an applicant’s country of origin.  15 U.S.C. §1126(e); 37 C.F.R. §2.34(a)(3)(ii); TMEP §§1004, 1004.01, 1016.  In addition, an applicant’s country of origin must be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law.  15 U.S.C. §1126(b); TMEP §§1002.01, 1004.

 

Therefore, applicant must provide a copy of the foreign registration from applicant’s country of origin when it becomes available.  TMEP §1003.04(a).  A copy of a foreign registration must consist of a document issued to an applicant by, or certified by, the intellectual property office in applicant’s country of origin.  TMEP §1004.01.  If applicant’s country of origin does not issue registrations or Madrid Protocol certificates of extension of protection, applicant may submit a copy of the Madrid Protocol international registration that shows that protection of the international registration has been extended to applicant’s country of origin.  TMEP §1016.  In addition, applicant must also provide an English translation if the foreign registration is not written in English.  37 C.F.R. §2.34(a)(3)(ii); TMEP §1004.01(a)-(b).  The translation should be signed by the translator.  TMEP §1004.01(b).

 

If the foreign registration has not yet issued, or applicant requires additional time to procure a copy of the foreign registration (and English translation, as appropriate), applicant should so inform the trademark examining attorney and request that the U.S. application be suspended until a copy of the foreign registration is available.  TMEP §§716.02(b), 1003.04(b).

 

If applicant cannot satisfy the requirements of a Section 44(e) basis, applicant may request that the mark be approved for publication based solely on the Section 1(b) basis.  See 15 U.S.C. §§1051(b), 1126(e); 37 C.F.R. §2.35(b)(1); TMEP §§806.02(f), 806.04(b), 1003.04(b).  Although the mark may be approved for publication on the Section 1(b) basis, it will not register until an acceptable allegation of use has been filed.  See 15 U.S.C. §1051(c)-(d); 37 C.F.R. §§2.76, 2.88; TMEP §1103.  Please note that, if the U.S. application satisfied the requirements of Section 44(d) as of the U.S. application filing date, applicant may retain the priority filing date under Section 44(d) without perfecting the Section 44(e) basis, provided there is a continuing valid basis for registration.  See 37 C.F.R. §2.35(b)(3)-(4); TMEP §§806.02(f), 806.04(b). 

 

Alternatively, applicant has the option to amend the application to rely solely on the Section 44(e) basis and request deletion of the Section 1(b) basis.  See 37 C.F.R. §2.35(b)(1); TMEP §806.04.  The foreign registration alone may serve as the basis for obtaining a U.S. registration.  See 37 C.F.R. §2.34(a)(3); TMEP §806.01(d).

 

Response guidelines.  For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action.  For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above.  For a requirement, applicant should set forth the changes or statements.  Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

/Michael FitzSimons/

Michael FitzSimons

Trademark Examining Attorney

Law Office 103

(571) 272-0619

michael.fitzsimons@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

U.S. TRADEMARK APPLICATION NO. 88292370 - APDIS - NIKN 1902115

To: NIKON CORPORATION (KLim-Docket@fzlz.com)
Subject: U.S. TRADEMARK APPLICATION NO. 88292370 - APDIS - NIKN 1902115
Sent: 4/29/2019 1:50:33 PM
Sent As: ECOM103@USPTO.GOV
Attachments:

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 4/29/2019 FOR U.S. APPLICATION SERIAL NO. 88292370

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 4/29/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.

 

 


uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed