Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1581 (Rev 09/2005) |
OMB No. 0651-0054 (Exp 12/31/2020) |
Request for Extension of Time to File a Statement of Use
(15 U.S.C. Section 1051(d))
The table below presents the data as entered.
Input Field
|
Entered
|
SERIAL NUMBER |
88267141 |
LAW OFFICE ASSIGNED |
LAW OFFICE 108 |
MARK SECTION |
MARK |
SMARTSYNC (see, http://uspto.report/TM/88267141/mark.png) |
STANDARD CHARACTERS |
YES |
USPTO-GENERATED IMAGE |
YES |
LITERAL ELEMENT |
SMARTSYNC |
OWNER SECTION (current) |
NAME |
Hypertherm, Inc. |
MAILING ADDRESS |
Etna Road, P.O. Box 5010 |
CITY |
Hanover |
STATE |
New Hampshire |
ZIP/POSTAL CODE |
03755 |
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY |
United States |
EMAIL |
XXXX |
OWNER SECTION (proposed) |
NAME |
Hypertherm, Inc. |
MAILING ADDRESS |
Etna Road, P.O. Box 5010 |
CITY |
Hanover |
STATE |
New Hampshire |
ZIP/POSTAL CODE |
03755 |
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY |
United States |
EMAIL |
XXXX |
CORRESPONDENCE INFORMATION (current) |
NAME |
Joseph A. Capraro Jr. |
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE |
docketingpatentboston@proskauer.com |
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES) |
jboumil@proskauer.com |
CORRESPONDENCE INFORMATION (proposed) |
NAME |
Joseph A. Capraro Jr. |
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE |
docketingpatentboston@proskauer.com |
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES) |
jboumil@proskauer.com |
DOCKET/REFERENCE NUMBER |
HYP-660 |
GOODS AND/OR SERVICES SECTION |
INTERNATIONAL CLASS |
007 |
CURRENT IDENTIFICATION |
Plasma arc cutting machines and replacement parts therefor; waterjet cutting machines and replacement parts therefor; machines and machine
tools for the cutting, marking, scoring, and forming of materials; plasma arc systems comprised of plasma arc torches, power supplies, control panels, water supplies, high frequency consoles, gas
consoles, noise and pollution suppressors, counter/timers, and replacement parts therefor; plasma arc cutting torches; plasma arc cutting torch cartridges and plasma arc cutting torch consumables in
the nature of nozzles, retaining caps, swirl rings, shields, shield caps, o-rings, cartridges, deflectors, and cooling tubes; waterjet systems comprised of waterjet cutting machines, pumps and
consumables in the nature of nozzles, orifices, alignment inserts, housing inserts, adaptors, valves, tubes, nuts, threaded discs, seats, seals, hoops, back-ups, cylinders, stems, rings, bearings,
caps, poppets, springs, adaptors, pins, filters, and needles |
GOODS OR SERVICES |
KEEP ALL LISTED |
INTERNATIONAL CLASS |
009 |
CURRENT IDENTIFICATION |
Electrical power supplies for plasma arc cutting machines and replacement parts therefor; electronic, electrical and computer-generated
controls in the nature of computer hardware and downloadable computer software for controlling plasma arc cutting machines and replacement parts therefor; electronic, electrical, computer hardware,
and downloadable computer software controllers for waterjet machines and pumps |
GOODS OR SERVICES |
KEEP ALL LISTED |
EXTENSION SECTION |
EXTENSION NUMBER |
1 |
ALLOWANCE MAIL DATE |
06/30/2020 |
STATEMENT OF USE |
NO |
PAYMENT SECTION |
NUMBER OF CLASSES |
2 |
SUBTOTAL AMOUNT [EXTENSION FEE] |
250 |
TOTAL AMOUNT |
250 |
SIGNATURE SECTION |
SIGNATURE |
/Garrett Quillia/ |
SIGNATORY'S NAME |
Garrett K. Quillia |
SIGNATORY'S POSITION |
Patent Attorney, Hypertherm, Inc. |
DATE SIGNED |
11/04/2020 |
FILING INFORMATION |
SUBMIT DATE |
Wed Nov 04 12:42:37 ET 2020 |
TEAS STAMP |
USPTO/ESU-XXX.XXX.XXX.XXX
-20201104124237114872-882
67141-7505f3cb86084db3253
35110a3a9b2a53a427788c520
c9ca373e28be4a728fdee0-DA
-42368131-202011041050483
62813 |
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1581 (Rev 09/2005) |
OMB No. 0651-0054 (Exp 12/31/2020) |
SOU Extension Request
(15 U.S.C. Section 1051(d))
To the Commissioner for Trademarks:
MARK: SMARTSYNC (see, http://uspto.report/TM/88267141/mark.png)
SERIAL NUMBER: 88267141
OWNER AND/OR ENTITY INFORMATION
The owner proposes to amend the following:
Current: Hypertherm, Inc., having an address of
Etna Road, P.O. Box 5010
Hanover, New Hampshire 03755
United States
Email: XXXX
Proposed: Hypertherm, Inc., having an address of
Etna Road, P.O. Box 5010
Hanover, New Hampshire 03755
United States
Phone:
Fax:
Email: XXXX
The owner requests a six-month extension of time to file the Statement of Use under 37 C.F.R. Section 2.89 in this application. The Notice of Allowance mailing date was 06/30/2020.
For International Class 007:
Current identification: Plasma arc cutting machines and replacement parts therefor; waterjet cutting machines and replacement parts therefor; machines and machine tools for the cutting, marking,
scoring, and forming of materials; plasma arc systems comprised of plasma arc torches, power supplies, control panels, water supplies, high frequency consoles, gas consoles, noise and pollution
suppressors, counter/timers, and replacement parts therefor; plasma arc cutting torches; plasma arc cutting torch cartridges and plasma arc cutting torch consumables in the nature of nozzles,
retaining caps, swirl rings, shields, shield caps, o-rings, cartridges, deflectors, and cooling tubes; waterjet systems comprised of waterjet cutting machines, pumps and consumables in the nature of
nozzles, orifices, alignment inserts, housing inserts, adaptors, valves, tubes, nuts, threaded discs, seats, seals, hoops, back-ups, cylinders, stems, rings, bearings, caps, poppets, springs,
adaptors, pins, filters, and needles
For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice
of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate
control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this
specific class.
For International Class 009:
Current identification: Electrical power supplies for plasma arc cutting machines and replacement parts therefor; electronic, electrical and computer-generated controls in the nature of computer
hardware and downloadable computer software for controlling plasma arc cutting machines and replacement parts therefor; electronic, electrical, computer hardware, and downloadable computer software
controllers for waterjet machines and pumps
For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice
of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate
control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this
specific class.
This is the first extension request.
Correspondence Information (current):
Joseph A. Capraro Jr.
PRIMARY EMAIL FOR CORRESPONDENCE: docketingpatentboston@proskauer.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): jboumil@proskauer.com
Correspondence Information (proposed):
Joseph A. Capraro Jr.
PRIMARY EMAIL FOR CORRESPONDENCE: docketingpatentboston@proskauer.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): jboumil@proskauer.com
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the owner/holder and the owner's/holder's attorney, if appointed, and that all
official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $250 will be submitted with the form, representing payment for 2 classes.
Declaration
STATEMENTS: The signatory believes that: the applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all the goods/services under Section
1(b) in the notice of allowance or as subsequently modified, or, if applicable, the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the
mark in commerce on or in connection with all the goods/services/collective membership organization under Section 1(b) in the notice of allowance or as subsequently modified; and that to the best of
the signatory's knowledge and belief, no other persons, except, if applicable, members and concurrent users, have the right to use the mark in commerce, either in the identical form or in such near
resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.
DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. §1001, and that such willful false statements and
the like may jeopardize the validity of the application or submission or any resulting registration, declares that all statements made of his/her own knowledge are true and that all statements made
on information and belief are believed to be true.
Signature: /Garrett Quillia/ Date Signed: 11/04/2020
Signatory's Name: Garrett K. Quillia
Signatory's Position: Patent Attorney, Hypertherm, Inc.
RAM Sale Number: 88267141
RAM Accounting Date: 11/04/2020
Serial Number: 88267141
Internet Transmission Date: Wed Nov 04 12:42:37 ET 2020
TEAS Stamp: USPTO/ESU-XXX.XXX.XXX.XXX-20201104124237
114872-88267141-7505f3cb86084db325335110
a3a9b2a53a427788c520c9ca373e28be4a728fde
e0-DA-42368131-20201104105048362813