|
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Jun 30, 2020 |
U.S. Serial Number: 88267141
Mark: SMARTSYNC
Docket/Reference Number: HYP-660
|
No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
- |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
- |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
Serial Number: |
88267141
|
Mark: |
SMARTSYNC
|
Docket/Reference Number: |
HYP-660
|
Owner: |
Hypertherm, Inc.
Etna Road, P.O. Box 5010
Hanover , NEW HAMPSHIRE 03755
|
Correspondence Address: |
Joseph A. Capraro Jr.
PROSKAUER ROSE LLP
ONE INTERNATIONAL PLACE
BOSTON MA 02110
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
GOODS/SERVICES BY INTERNATIONAL CLASS |
007 - |
Plasma arc cutting machines and replacement parts therefor; waterjet cutting machines and replacement parts therefor; machines and machine tools for the cutting,
marking, scoring, and forming of materials; plasma arc systems comprised of plasma arc torches, power supplies, control panels, water supplies, high frequency consoles, gas consoles, noise and
pollution suppressors, counter/timers, and replacement parts therefor; plasma arc cutting torches; plasma arc cutting torch cartridges and plasma arc cutting torch consumables in the nature of
nozzles, retaining caps, swirl rings, shields, shield caps, o-rings, cartridges, deflectors, and cooling tubes; waterjet systems comprised of waterjet cutting machines, pumps and consumables in the
nature of nozzles, orifices, alignment inserts, housing inserts, adaptors, valves, tubes, nuts, threaded discs, seats, seals, hoops, back-ups, cylinders, stems, rings, bearings, caps, poppets,
springs, adaptors, pins, filters, and needles -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
009 - |
Electrical power supplies for plasma arc cutting machines and replacement parts therefor; electronic, electrical and computer-generated controls in the nature of
computer hardware and downloadable computer software for controlling plasma arc cutting machines and replacement parts therefor; electronic, electrical, computer hardware, and downloadable computer
software controllers for waterjet machines and pumps -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|