UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 3/22/2019

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

 

SUMMARY OF ISSUES:

• SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
• IDENTIFICATION OF SERVICES

 

 

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

 

Registration of the applied-for mark is refused because of a likelihood of confusion with the marks in U.S. Registration Nos. 1939212 and 4483059.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registrations.

 

Applicant’s mark is “TC” with a design element for “round bar production and precision center-less grinding” in International Class 040.

 

Reg. No. 1939212 is for “TC” with a design element for “heat treating, hardening, tempering, annealing, hardfacing, straightening, and normalizing metal bars, rods, plates, and structural shapes for others” in International Class 040.

 

Reg. No. 4483059 is for “TC1” in standard character form for “treatment of materials, namely, metal treatment, metal stamping and metal plating” in International Class 040.

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

Comparison of the Marks

 

Turning to the first prong of the test, a comparison must be made between the applied-for mark “TC” with a design element and the registered marks “TC” with a design element and “TC1” in standard character form.

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v).  “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.”  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)); TMEP §1207.01(b).

 

When comparing marks, “[t]he proper test is not a side-by-side comparison of the marks, but instead whether the marks are sufficiently similar in terms of their commercial impression such that [consumers] who encounter the marks would be likely to assume a connection between the parties.”  Cai v. Diamond Hong, Inc., __ F.3d __, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1368, 101 USPQ2d 1713, 1721 (Fed. Cir. 2012)); TMEP §1207.01(b).  The proper focus is on the recollection of the average purchaser, who retains a general rather than specific impression of trademarks.  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re St. Helena Hosp., 774 F.3d 747, 750-51, 113 USPQ2d 1082, 1085 (Fed. Cir. 2014); Geigy Chem. Corp. v. Atlas Chem. Indus., Inc., 438 F.2d 1005, 1007, 169 USPQ 39, 40 (CCPA 1971)); TMEP §1207.01(b).

 

The marks all use the letters “TC”, which creates a similar overall commercial impression. Marks may be confusingly similar in appearance where similar terms or phrases or similar parts of terms or phrases appear in the compared marks and create a similar overall commercial impression.  See Crocker Nat’l Bank v. Canadian Imperial Bank of Commerce, 228 USPQ 689, 690-91 (TTAB 1986), aff’d sub nom. Canadian Imperial Bank of Commerce v. Wells Fargo Bank, Nat’l Ass’n, 811 F.2d 1490, 1495, 1 USPQ2d 1813, 1817 (Fed. Cir. 1987) (finding COMMCASH and COMMUNICASH confusingly similar); In re Corning Glass Works, 229 USPQ 65, 66 (TTAB 1985) (finding CONFIRM and CONFIRMCELLS confusingly similar); In re Pellerin Milnor Corp., 221 USPQ 558, 560 (TTAB 1983) (finding MILTRON and MILLTRONICS confusingly similar); TMEP §1207.01(b)(ii)-(iii).

 

Additionally, the wording “TC” in the applied-for mark is fully incorporated in the registered mark “TC1”. Incorporating the entirety of one mark within another does not obviate the similarity between the compared marks, as in the present case, nor does it overcome a likelihood of confusion under Section 2(d).  See Wella Corp. v. Cal. Concept Corp., 558 F.2d 1019, 1022, 194 USPQ 419, 422 (C.C.P.A. 1977) (finding CALIFORNIA CONCEPT and surfer design and CONCEPT confusingly similar); Coca-Cola Bottling Co. v. Jos. E. Seagram & Sons, Inc., 526 F.2d 556, 557, 188 USPQ 105, 106 (C.C.P.A. 1975) (finding BENGAL LANCER and design and BENGAL confusingly similar); In re Integrated Embedded, 120 USPQ2d 1504, 1513 (TTAB 2016) (finding BARR GROUP and BARR confusingly similar); In re Mr. Recipe, LLC, 118 USPQ2d 1084, 1090 (TTAB 2016) (finding JAWS DEVOUR YOUR HUNGER and JAWS confusingly similar); TMEP §1207.01(b)(iii).  In the present case, the marks are identical in part.

 

The design elements in the applied-for mark and the registered mark “TC” do not distinguish the applied-for mark from the registered marks. When evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods and/or services.  In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii).  Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed.  In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)). Therefore, the dominant portion of the marks is the wording, which is sufficiently similar that confusion is likely among consumers.

 

Accordingly, the marks are confusingly similar in their entireties when giving each feature of the marks their appropriate weight.

 

Comparison of the Services

 

The goods and/or services are compared to determine whether they are similar, commercially related, or travel in the same trade channels.  See Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-71, 101 USPQ2d 1713, 1722-23 (Fed. Cir. 2012); Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1165, 64 USPQ2d 1375, 1381 (Fed. Cir. 2002); TMEP §§1207.01, 1207.01(a)(vi).

 

The compared goods and/or services need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

Applicant’s mark is for “round bar production and precision center-less grinding” in International Class 040.

 

Reg. No. 1939212 is for “heat treating, hardening, tempering, annealing, hardfacing, straightening, and normalizing metal bars, rods, plates, and structural shapes for others” in International Class 040.

 

Reg. No. 4483059 is for “treatment of materials, namely, metal treatment, metal stamping and metal plating” in International Class 040.

 

The attached Internet evidence, consisting of third-party service providers, establishes that the same entity commonly manufactures/produces/provides the relevant goods and/or services and markets the goods and/or services under the same mark, the relevant goods and/or services are sold or provided through the same trade channels and used by the same classes of consumers in the same fields of use, and the goods and/or services are similar or complementary in terms of purpose or function.  Thus, applicant’s and registrant’s goods and/or services are considered related for likelihood of confusion purposes.  See, e.g., In re Davey Prods. Pty Ltd., 92 USPQ2d 1198, 1202-04 (TTAB 2009); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1268-69, 1271-72 (TTAB 2009).

 

• Wisconsin Metal Tech
• • Centerless grinding - http://wisconsinmetaltech.com/benefits-of-centerless-grinding/
  • Rod and bar production - http://wisconsinmetaltech.com/rod-and-bar-supply/
  • Heat treating - http://wisconsinmetaltech.com/heat-treating/
  • Metal plating - http://wisconsinmetaltech.com/metal-plating/
• Plouse
• • Centerless grinding - http://www.plousemanufacturing.com/glossary/centerless-grinding
  • Plating - http://www.plousemanufacturing.com/capabilities/anodizing-and-plating
  • Heat treatment - http://www.plousemanufacturing.com/capabilities/heat-treatment
  • Precision grinding - http://www.plousemanufacturing.com/capabilities/precision-grinding
  • Metal stamping - http://www.plousemanufacturing.com/capabilities/metal-stamping
• Centerless Grinding Service
• • Precision straightening - http://centerlessgrind.com/services-precision-straightening.shtml
  • Processing parts - http://centerlessgrind.com/services-processing.shtml
  • Centerless grinding - http://centerlessgrind.com/services-centerless-grinding.shtml

 

Accordingly, with the contemporaneous use of sufficiently similar marks, consumers are likely to conclude that the goods and/or services are related and originate from a single source. As such, registration must be refused under Trademark Act Section 2(d).

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.  However, if applicant responds to the refusal(s), applicant must also respond to the requirement(s) set forth below.

 

 

 

IDENTIFICATION OF SERVICES

 

The services are classified incorrectly. “Grinding services” and “metal fabrication and finishing services for others” are in International Class 040. Applicant must amend the application to classify the services in International Class 040.  See 37 C.F.R. §§2.32(a)(7), 2.85; TMEP §§1401.02(a), 1401.03(b).

 

The wording “round bar production” in the identification of services is indefinite and must be clarified because applicant must further specify the nature of the services.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  

 

Applicant may substitute the following wording, if accurate:  

 

International Class 040: Round bar production, namely, metal fabrication and finishing services for others and precision center-less grinding services

 

Applicant’s goods and/or services may be clarified or limited, but may not be expanded beyond those originally itemized in the application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Applicant may clarify or limit the identification by inserting qualifying language or deleting items to result in a more specific identification; however, applicant may not substitute different goods and/or services or add goods and/or services not found or encompassed by those in the original application or as acceptably amended.  See TMEP §1402.06(a)-(b).  The scope of the goods and/or services sets the outer limit for any changes to the identification and is generally determined by the ordinary meaning of the wording in the identification.  TMEP §§1402.06(b), 1402.07(a)-(b).  Any acceptable changes to the goods and/or services will further limit scope, and once goods and/or services are deleted, they are not permitted to be reinserted.  TMEP §1402.07(e).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

 

 

RESPONSE GUIDELINES

 

For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action.  For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above.  For a requirement, applicant should set forth the changes or statements.  Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

Please note that foreign attorneys, other than authorized Canadian attorneys, are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal).  See 37 C.F.R. §§2.17(e), 11.14(c), (e); TMEP §602.03-.03(c). 

 

The only attorneys who may practice before the USPTO in trademark matters are as follows:

 

(1)       Attorneys in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories; and

 

(2)       Canadian agents/attorneys who represent applicants located in Canada and (a) are registered with the USPTO and in good standing as patent agents or (b) have been granted reciprocal recognition by the USPTO.

 

See 37 C.F.R. §§2.17(a), (e), 11.1, 11.14(a), (c); TMEP §602.

 

 

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

/Tricia L. Brown/

Examining Attorney

Law Office 121

(571) 270-7892

tricia.brown@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 3/22/2019 FOR U.S. APPLICATION SERIAL NO. 88245870

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 3/22/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.