CORRECTED Feb 22, 2020 |
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Jul 23, 2019 |
U.S. Serial Number: 88238874
Mark: HALO (Stylized/Design)
Docket/Reference Number: 89653-15
|
No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
- |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
- |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
Serial Number: |
88238874
|
Mark: |
HALO (Stylized/Design)
|
Docket/Reference Number: |
89653-15
|
Owner: |
Hammond Group, Inc.
P.O. Box 6408
1414 Field St., Bldg B
Hammond , INDIANA 46325
|
Correspondence Address: |
APRIL L. BESL
DINSMORE & SHOHL LLP
255 E. Fifth St., Suite 1900
CINCINNATI, OH 45202
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
GOODS/SERVICES BY INTERNATIONAL CLASS |
006 - |
Semi-wrought common metals in particle and powdered form, for further manufacture into parts made from compressed metal powders to be sintered, heat treated or
machined; Semi-wrought common metals in particle and powdered form, for further manufacture into metal parts made from extruded metal powders to be sintered, heat treated or machined; Semi-wrought
common metals in particle and powdered form, for further manufacture into metal parts made from 3D printed metal powders to be sintered, heat treated or machined; Semi-wrought common metals in
particle and powdered form, for further manufacture into parts made from polymer or ceramic encapsulated metal powders; Semi-wrought common metals in particle and powdered form, for further
manufacture into metal powder containing lubricants; Semi-wrought common metals in particle and powdered form, for further manufacture into metal powder containing propellants; Semi-wrought common
metals in particle and powdered form, for further manufacture into metal powder containing explosives; Semi-wrought common metals in particle and powdered form, for further manufacture into metal
powder containing pyrotechnics; Mixtures of semi-wrought common metals in particle and powdered form, for further manufacture into metal powder containing solders; Mixtures of semi-wrought common
metals in particle and powdered form, for further manufacture into metal powder containing radiological personal protective equipment and X-ray shielding coatings -- FIRST USE DATE: NONE; -- USE IN
COMMERCE DATE: NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|