Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88212898 SHURE (Stylized and/or with Design, see http://uspto.report/TM/88212898/mark.png) has been amended as follows:

ARGUMENT(S)
In response to the substantive refusal(s), please note the following:

This amendment and response is submitted in reply to the Office Action issued March 1, 2019, which requested amendments to the goods and services identifications.

 

In response to the request for clarification of the identifications of goods and services, Applicant is submitting a revised description of the goods and services that reflects the recommendations of the Examining Attorney. Accordingly, Applicant believes the amended description now meets the requirements for clarity.

 

Upon submission of this response, it is believed that this application will be in condition for publication. Such action is respectfully requested.

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Microphones; microphone cases and stands; wireless audio systems, comprising wireless microphones, wireless receivers, wireless transmitters, spectrum analyzers, wireless access point (wap) devices, ethernet switches, antenna distribution systems, antennas, microphone switches, audio cables, batteries, battery packs, and battery chargers; wireless transmitters; wireless receivers; microphones with enhanced radio frequency interference shielding capabilities; wireless microphones; wired microphones; microphone transducers; microphone cables; audio processors for the recording, transmission, amplification, reproduction, and processing of sound; microphone mixer; audio systems comprising microphones, wireless transmitters, and audio network interfaces; audio network interfaces; controls for audio receivers; preamplifiers; audio receivers; audio equipment for receiving wireless signals; electronic switchers for audio signals; transformers; coiled electric cord; microphone cartridges; microphone stands; amplifiers; audio conferencing consoles; digital signal processors; digital switching apparatus for use with audio devices; audio mixer output expanders; earphones; earphone sleeves; earphone cases; headphones; headsets for use with music players; headsets for use with telephones; headset sleeves; microphone booms; audio attenuators; electrical filters; electrical phase reversers; electronic tone generators; microphone adapters for video equipment; network interface adapters; computer software for digital signal processing; computer software for digital feedback reduction; computer software for monitoring and controlling wireless audio systems; cases for microphones and audio systems; microphone windscreens; microphone cables and cordsets; audio cables; power cables; microphone transformers; audio mixers; power amplifiers; audio amplifiers; wireless audio receivers; wireless audio transmitters; antennas; antenna distribution systems, namely, amplifiers, combiners and splitters; antenna cables; antenna splitters; rack mounting kits, namely, brackets, fasteners, trays, spacers, panels, connectors and cables; microphone goosenecks; microphone anti-roll devices; audio connectors; wireless audio systems, namely, microphones, receivers, transmitters, power supplies, cables and antennas; audio equalizers; audio processors; audio feedback reducers; power supplies; hard wired and wireless audio monitor systems, namely, transmitters, receivers and earpieces; network interface systems, namely, interface modules, software for monitoring and control of wireless receivers and cables for wireless audio systems; microphone grilles; microphone mounts and adapters; microphone switches; mounts for attaching microphones or audio equipment to a user; microphone mounting brackets for use in live sound stage productions and live sound recording studios; wireless systems comprising audio transmitters and audio receivers for use with microphones and musical instruments; cables, namely, electronic cables, electric cables, connection cables, audio cables, power cables, instrument cables; multi-channel computer controlled audio digital signal processor; computer software to control and monitor the function of audio equipment; wireless audio systems, comprising wireless transmitters and wireless receivers; wireless systems, comprising uhf receivers, uhf body-pack transmitters, and handheld uhf transmitters; electro-acoustical devices-namely, microphones; earphone wax guards; cases for headphones; audio upgrade card; antenna combiners; downloadable software for recording audio, editing audio, monitoring and controlling audio equipment; downloadable software for updating firmware and software of audio equipment; downloadable computer software for programming identification cards for audio conferencing; downloadable software for audio and video recording; software for integrating video and audio; software that automatically displays a video image of a person speaking for recording, broadcasting, and streaming applications; headsets for use with audio systems; audio channel selector; network charging station for audio transmitters; chargers for batteries; rechargeable batteries; Simultaneous interpretation receivers; digital radiator; transceivers; audio transceivers; wireless access point transceivers; antenna cases; mounts for audio equipment; flush-mounts for audio equipment; junction boxes; audio repeaters; video camera for video conferencing unit; guitar wireless system, namely, guitar cables, guitar pedal receivers, and guitar mounts; USB cables; USB charging cables for use in vehicles; microphone accessories, namely, color identification rings for microphones; protective cases for wireless transmitters; Software for configuring, managing, monitoring, and control of audio/visual conferencing equipment; software for use in controlling, configuring, managing, and personalizing audio for conferencing; audio conferencing system comprising audio conferencing console, microphones, loudspeakers, digital media receivers, simultaneous interpretation receivers, and headphones for conferencing; Digital conferencing system consisting of a central audio control unit, power extension unit, audio output unit, junction box, repeater unit, power inserter, software for configuring, managing, monitoring, and control of audio and visual conferencing equipment; digital audio discussion systems comprising microphones, loudspeakers, simultaneous interpretation receivers, and user control hardware; Wireless microphone systems comprising audio transmitter unit, microphone, transceiver, audio network interface device, and chargers for the aforementioned products; tuners for electronic musical instruments; kit consisting of microphones, microphone adapters, microphone mounts and power cables, and cases for microphones; and components, parts, and fittings of all of the foregoing
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Microphones; microphone cases and stands; wireless audio systems, comprising wireless microphones, wireless receivers, wireless transmitters, spectrum analyzers, wireless access point (wap) devices, ethernet switches, antenna distribution systems, antennas, microphone switches, audio cables, batteries, battery packs, and battery chargers; wireless transmitters; wireless receivers; microphones with enhanced radio frequency interference shielding capabilities; wireless microphones; wired microphones; microphone transducers; microphone cables; audio processors for the recording, transmission, amplification, reproduction, and processing of sound; microphone mixer; audio systems comprising microphones, wireless transmitters, and audio network interfaces; audio network interfaces; controls for audio receivers; preamplifiers; audio receivers; audio equipment for receiving wireless signals; electronic switchers for audio signals; transformers; coiled electric cord; microphone cartridges; microphone stands; amplifiers; audio conferencing consoles; digital signal processors; digital switching apparatus for use with audio devices; audio mixer output expanders; earphones; earphone sleeves; earphone cases; headphones; headsets for use with music players; headsets for use with telephones; headset sleeves; microphone booms; audio attenuators; electrical filters; electrical phase reversers; electronic tone generators; microphone adapters for video equipment; network interface adapters; computer software for digital signal processing; computer software for digital feedback reduction; computer software for monitoring and controlling wireless audio systems; cases for microphones and audio systems; microphone windscreens; microphone cables and cordsets; audio cables; power cables; microphone transformers; audio mixers; power amplifiers; audio amplifiers; wireless audio receivers; wireless audio transmitters; antennas; antenna distribution systems, namely, amplifiers, combiners and splitters; antenna cables; antenna splitters; rack mounting kits, namely, brackets, fasteners, trays, spacers, panels, connectors and cables; rack mounting kits especially adapted for audio equipment microphones, wireless receivers, wireless transmitters, Ethernet switches, sound recording and sound reproducing apparatus and instruments, namely, brackets, fasteners, trays, spacers, panels, connectors and cables; microphone goosenecks; microphone anti-roll devices; audio connectors; wireless audio systems, namely, microphones, receivers, transmitters, power supplies, cables and antennas; audio equalizers; audio processors; audio feedback reducers; power supplies; hard wired and wireless audio monitor systems, namely, transmitters, receivers and earpieces; network interface systems, namely, interface modules, software for monitoring and control of wireless receivers and cables for wireless audio systems; microphone grilles; microphone mounts and adapters; microphone switches; mounts for attaching microphones or audio equipment to a user; microphone mounting brackets for use in live sound stage productions and live sound recording studios; wireless systems comprising audio transmitters and audio receivers for use with microphones and musical instruments; cables, namely, electronic cables, electric cables, connection cables, audio cables, power cables, instrument cables; multi-channel computer controlled audio digital signal processor; computer software to control and monitor the function of audio equipment; wireless audio systems, comprising wireless transmitters and wireless receivers; wireless systems, comprising uhf receivers, uhf body-pack transmitters, and handheld uhf transmitters; electro-acoustical devices-namely, microphones; earphone wax guards; earphone wax guards, not for medical use; cases for headphones; audio upgrade card; audio upgrade card, namely, sound card; antenna combiners; electronic antenna combiners; downloadable software for recording audio, editing audio, monitoring and controlling audio equipment; downloadable software for updating firmware and software of audio equipment; downloadable computer software for programming identification cards for audio conferencing; downloadable software for audio and video recording; software for integrating video and audio; software that automatically displays a video image of a person speaking for recording, broadcasting, and streaming applications; headsets for use with audio systems; audio channel selector; network charging station for audio transmitters; chargers for batteries; rechargeable batteries; Simultaneous interpretation receivers; digital radiator; digital radiator, namely, audio transmitters and receivers, infrared detectors, infrared sensors; transceivers; audio transceivers; wireless access point transceivers; antenna cases; mounts for audio equipment; flush-mounts for audio equipment; flush-mounts especially adapted for audio equipment; junction boxes; audio repeaters; video camera for video conferencing unit; guitar wireless system, namely, guitar cables, guitar pedal receivers, and guitar mounts; USB cables; USB charging cables for use in vehicles; microphone accessories, namely, color identification rings for microphones; protective cases for wireless transmitters; Software for configuring, managing, monitoring, and control of audio/visual conferencing equipment; software for use in controlling, configuring, managing, and personalizing audio for conferencing; audio conferencing system comprising audio conferencing console, microphones, loudspeakers, digital media receivers, simultaneous interpretation receivers, and headphones for conferencing; Digital conferencing system consisting of a central audio control unit, power extension unit, audio output unit, junction box, repeater unit, power inserter, software for configuring, managing, monitoring, and control of audio and visual conferencing equipment; digital audio discussion systems comprising microphones, loudspeakers, simultaneous interpretation receivers, and user control hardware; Wireless microphone systems comprising audio transmitter unit, microphone, transceiver, audio network interface device, and chargers for the aforementioned products; tuners for electronic musical instruments; kit consisting of microphones, microphone adapters, microphone mounts and power cables, and cases for microphones; and component parts and fittings of all of the foregoing; and components, parts, and fittings of all of the foregoingClass 009 for Microphones; microphone cases and stands; wireless audio systems, comprising wireless microphones, wireless receivers, wireless transmitters, spectrum analyzers, wireless access point (wap) devices, ethernet switches, antenna distribution systems, antennas, microphone switches, audio cables, batteries, battery packs, and battery chargers; wireless transmitters; wireless receivers; microphones with enhanced radio frequency interference shielding capabilities; wireless microphones; wired microphones; microphone transducers; microphone cables; audio processors for the recording, transmission, amplification, reproduction, and processing of sound; microphone mixer; audio systems comprising microphones, wireless transmitters, and audio network interfaces; audio network interfaces; controls for audio receivers; preamplifiers; audio receivers; audio equipment for receiving wireless signals; electronic switchers for audio signals; transformers; coiled electric cord; microphone cartridges; microphone stands; amplifiers; audio conferencing consoles; digital signal processors; digital switching apparatus for use with audio devices; audio mixer output expanders; earphones; earphone sleeves; earphone cases; headphones; headsets for use with music players; headsets for use with telephones; headset sleeves; microphone booms; audio attenuators; electrical filters; electrical phase reversers; electronic tone generators; microphone adapters for video equipment; network interface adapters; computer software for digital signal processing; computer software for digital feedback reduction; computer software for monitoring and controlling wireless audio systems; cases for microphones and audio systems; microphone windscreens; microphone cables and cordsets; audio cables; power cables; microphone transformers; audio mixers; power amplifiers; audio amplifiers; wireless audio receivers; wireless audio transmitters; antennas; antenna distribution systems, namely, amplifiers, combiners and splitters; antenna cables; antenna splitters; rack mounting kits especially adapted for audio equipment microphones, wireless receivers, wireless transmitters, Ethernet switches, sound recording and sound reproducing apparatus and instruments, namely, brackets, fasteners, trays, spacers, panels, connectors and cables; microphone goosenecks; microphone anti-roll devices; audio connectors; wireless audio systems, namely, microphones, receivers, transmitters, power supplies, cables and antennas; audio equalizers; audio processors; audio feedback reducers; power supplies; hard wired and wireless audio monitor systems, namely, transmitters, receivers and earpieces; network interface systems, namely, interface modules, software for monitoring and control of wireless receivers and cables for wireless audio systems; microphone grilles; microphone mounts and adapters; microphone switches; mounts for attaching microphones or audio equipment to a user; microphone mounting brackets for use in live sound stage productions and live sound recording studios; wireless systems comprising audio transmitters and audio receivers for use with microphones and musical instruments; cables, namely, electronic cables, electric cables, connection cables, audio cables, power cables, instrument cables; multi-channel computer controlled audio digital signal processor; computer software to control and monitor the function of audio equipment; wireless audio systems, comprising wireless transmitters and wireless receivers; wireless systems, comprising uhf receivers, uhf body-pack transmitters, and handheld uhf transmitters; electro-acoustical devices-namely, microphones; earphone wax guards, not for medical use; cases for headphones; audio upgrade card, namely, sound card; electronic antenna combiners; downloadable software for recording audio, editing audio, monitoring and controlling audio equipment; downloadable software for updating firmware and software of audio equipment; downloadable computer software for programming identification cards for audio conferencing; downloadable software for audio and video recording; software for integrating video and audio; software that automatically displays a video image of a person speaking for recording, broadcasting, and streaming applications; headsets for use with audio systems; audio channel selector; network charging station for audio transmitters; chargers for batteries; rechargeable batteries; Simultaneous interpretation receivers; digital radiator, namely, audio transmitters and receivers, infrared detectors, infrared sensors; transceivers; audio transceivers; wireless access point transceivers; antenna cases; mounts for audio equipment; flush-mounts especially adapted for audio equipment; junction boxes; audio repeaters; video camera for video conferencing unit; guitar wireless system, namely, guitar cables, guitar pedal receivers, and guitar mounts; USB cables; USB charging cables for use in vehicles; microphone accessories, namely, color identification rings for microphones; protective cases for wireless transmitters; Software for configuring, managing, monitoring, and control of audio/visual conferencing equipment; software for use in controlling, configuring, managing, and personalizing audio for conferencing; audio conferencing system comprising audio conferencing console, microphones, loudspeakers, digital media receivers, simultaneous interpretation receivers, and headphones for conferencing; Digital conferencing system consisting of a central audio control unit, power extension unit, audio output unit, junction box, repeater unit, power inserter, software for configuring, managing, monitoring, and control of audio and visual conferencing equipment; digital audio discussion systems comprising microphones, loudspeakers, simultaneous interpretation receivers, and user control hardware; Wireless microphone systems comprising audio transmitter unit, microphone, transceiver, audio network interface device, and chargers for the aforementioned products; kit consisting of microphones, microphone adapters, microphone mounts and power cables, and cases for microphones; and component parts and fittings of all of the foregoing
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 035 for Providing information in the field of audio and electronic products all on-line via a global computer network
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Providing information in the field of audio and electronic products all on-line via a global computer network; Providing consumer product information in the field of audio and electronic products all on-line via a global computer networkClass 035 for Providing consumer product information in the field of audio and electronic products all on-line via a global computer network
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 037 for Repair and maintenance services for electronic equipment
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Repair and maintenance services for electronic equipment; Repair and maintenance services for electronic equipment, namely, audio equipment, computer hardwareClass 037 for Repair and maintenance services for electronic equipment, namely, audio equipment, computer hardware
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 041 for Providing information in the field of sound and music, all on-line via a global computer network; providing online blogs in the field of sound, music, and entertainment; providing non-downloadable webinars in the field of sound, music, and entertainment; entertainment services, namely, providing podcasts in the field of sound, music, and entertainment
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Providing information in the field of sound and music, all on-line via a global computer network; Providing information in the field of sound, namely, audio equipment, sound mixing, production of sound recordings, audio mastering, and editing and recording of sound, and music, all on-line via a global computer network; providing online blogs in the field of sound, music, and entertainment; providing non-downloadable webinars in the field of sound, music, and entertainment; entertainment services, namely, providing podcasts in the field of sound, music, and entertainmentClass 041 for Providing information in the field of sound, namely, audio equipment, sound mixing, production of sound recordings, audio mastering, and editing and recording of sound, and music, all on-line via a global computer network; providing online blogs in the field of sound, music, and entertainment; providing non-downloadable webinars in the field of sound, music, and entertainment; entertainment services, namely, providing podcasts in the field of sound, music, and entertainment
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

The applicant's current attorney information: Katherine L. Fink. Katherine L. Fink of BANNER & WITCOFF, LTD., is located at

      SUITE 3600
      71 SOUTH WACKER DRIVE
      CHICAGO, Illinois 60606
      US
The docket/reference number is 010886.01886.

The phone number is 312-463-5000.

The fax number is 312-463-5001.

The email address is bwptotm@bannerwitcoff.com

The applicants proposed attorney information: Katherine L. Fink. Other appointed attorneys are Helen Hill Minsker, Richard S. Stockton, Katherine L. Fink, Anna L. King, Maurine L. Knutsson, Heather R. Smith-Carra, Elizabeth A. Brodzinski, William F. Rauchholz, Dale H. Hoscheit, Joseph M. Potenza, Robert F. Altherr, Ross A. Dannenberg, John M. Fleming, Jordan N. Bodner, Steve S. Chang, Gary D. Fedorochko, Christopher R. Glembocki, Lisa M. Hemmendinger, Sarah A. Kagan, Robert S. Katz, Christopher L. McKee, Frederic M. Meeker, Darrell G. Mottley, H. Wayne Porter, Christopher B. Roth, Joseph M. Skerpon, Benjamin C. Spehlmann, Susan A. Wolffe, Bradley C. Wright, Paul M. Rivard, C. Andy Mu, Evan M. Clark, Michael Cuviello, Joseph J. Berghammer, Marc S. Cooperman, J. Pieter van Es, Michael L. Krashin, Jon O. Nelson, Christopher J. Renk, Binal J. Patel, Charles W. Shifley, William Allen, Matthew P. Becker, Scott A. Burow, Michael Harris, Erik S. Maurer, Charles L. Miller, Janice V. Mitrius, Thomas K. Pratt, Robert H. Resis, Gregory G. Schlenz, Jason Shull, Timothy C. Meece, Sheldon W. Witcoff, Katie L. Becker, Bradley J. Van Pelt, Timothy J. Rechtien, Aseet Patel, Matthew May, Aimee B. Kolz, Louis DiSanto, Azuka Dike, Audra Eidem Heinze, Sean Jungels, Gregory J. Cohan, John P. Iwanicki, Ernest V. Linek, Eric Hamp, Victoria R. M. Webb, Brian Emfinger, Rajit Kapur, Elizabeth Almeter, Peter Nigrelli, Kevin Keenan, Joshua Davenport, Camille Sauer, Shambhavi Patel, Pei Wu, John A. Webb, Jr., Robert Boyd, Bennett Ingvoldstad, Justin Philpott, Eric Zelepegus, Zach Getzelman, Kim Devine, Kurt Riester, Alisa Abbott, Joshua Schneider, Kirk Sigmon, Kevin Dam, Anthony J. Denis, Kerry Creeron, Craig Kronenthal. Katherine L. Fink of BANNER & WITCOFF, LTD., is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at

      SUITE 3600
      71 SOUTH WACKER DRIVE
      CHICAGO, Illinois 60606
      United States
The docket/reference number is 010886.01886.

The phone number is 312-463-5000.

The fax number is 312-463-5001.

The email address is bwptotm@bannerwitcoff.com

Katherine L. Fink submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: KATHERINE L. FINK. KATHERINE L. FINK of BANNER & WITCOFF, LTD., is located at

      SUITE 3600
      71 SOUTH WACKER DRIVE
      CHICAGO, Illinois 60606
      US
The docket/reference number is 010886.01886.

The phone number is 312-463-5000.

The fax number is 312-463-5001.

The email address is bwptotm@bannerwitcoff.com

The applicants proposed correspondence information: Katherine L. Fink. Katherine L. Fink of BANNER & WITCOFF, LTD., is located at

      SUITE 3600
      71 SOUTH WACKER DRIVE
      CHICAGO, Illinois 60606
      United States
The docket/reference number is 010886.01886.

The phone number is 312-463-5000.

The fax number is 312-463-5001.

The email address is bwptotm@bannerwitcoff.com

SIGNATURE(S)
Response Signature
Signature: /Katherine L. Fink/     Date: 08/20/2019
Signatory's Name: Katherine L. Fink
Signatory's Position: Attorney of record, Illinois bar member

Signatory's Phone Number: 312-463-5000

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    KATHERINE L. FINK
   BANNER & WITCOFF, LTD.
   SUITE 3600
   71 SOUTH WACKER DRIVE
   CHICAGO, Illinois 60606
Mailing Address:    Katherine L. Fink
   BANNER & WITCOFF, LTD.
   SUITE 3600
   71 SOUTH WACKER DRIVE
   CHICAGO, Illinois 60606
        
Serial Number: 88212898
Internet Transmission Date: Tue Aug 20 21:15:47 EDT 2019
TEAS Stamp: USPTO/ROA-X.XX.XX.XXX-201908202115476215
35-88212898-610e48378da336957c5b3c195651
4da6da7dd0c16b824c6e34450fee2f33dca29-N/
A-N/A-20190819160412887191