Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88210131 ARSENAL(Standard Characters, see http://uspto.report/TM/88210131/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant hereby deletes the following class of goods/services from the application.
Class 001 for Chemicals used in the oil and gas industry, namely, drilling muds, drilling chemicals, cement blends, fracturing fluids and chemicals, production chemicals, and additives for same

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metallic equipment for use in oil and gas exploration, completion, and production, namely, casing centralizers, tubing centralizers, slickline, drillpipe, casing, tubing, valves, packers, liner hangers, float shoes and float collars, stop collars, casing collars, frac plugs, scrapers, toe sleeves, sliding sleeves, vibration tools, wellhead, frac stacks, fishing tools, drill bits and drill bit cutters
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Metallic equipment for use in oil and gas exploration, completion, and production, namely, casing centralizers, tubing centralizers, slickline, drillpipe, casing, tubing, valves, packers, liner hangers, float shoes and float collars, stop collars, casing collars, frac plugs, scrapers, toe sleeves, sliding sleeves, vibration tools, wellhead, frac stacks, fishing tools, drill bits and drill bit cutters; Metallic equipment in the nature of metal hardware for use in oil and gas exploration, completion, and production, namely, slickline wire, drill pipe, casing, tubing, valves not being parts of machines; metal pipe collars specially adapted to protect threads of oil pipeClass 006 for Metallic equipment in the nature of metal hardware for use in oil and gas exploration, completion, and production, namely, slickline wire, drill pipe, casing, tubing, valves not being parts of machines; metal pipe collars specially adapted to protect threads of oil pipe
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Machines and tools for use in oil and gas exploration, completion, and production, namely, non-metallic casing centralizers, non-metallic tubing centralizers, non-metallic packers, non-metallic frac balls and frac plugs, non-metallic drill bits and drill bit cutters, fluid pumps and separators, drilling and workover rigs, torque and drag tools, friction reduction tools, artificial lift systems, solid control equipment, wireline cable heads and related equipment, thread protectors, and drill pipe protectors
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Machines and tools for use in oil and gas exploration, completion, and production, namely, non-metallic casing centralizers, non-metallic tubing centralizers, non-metallic packers, non-metallic frac balls and frac plugs, non-metallic drill bits and drill bit cutters, fluid pumps and separators, drilling and workover rigs, torque and drag tools, friction reduction tools, artificial lift systems, solid control equipment, wireline cable heads and related equipment, thread protectors, and drill pipe protectors; Machines and tools for use in oil and gas exploration, completion, and production, namely, metallic and non-metallic casing centralizers, metallic and non-metallic tubing centralizers, metallic and non-metallic packers, metallic and non-metallic frac balls and frac plugs, metallic and non-metallic power drill bits and drill bit cutters, fluid pumps and separators, drilling rigs and workover rigs in the nature of drilling rigs, torque converters, other than for land vehicles and drag-line excavator tools, friction reduction tools in the nature of pumps for tools, artificial lift systems in the nature of springs being parts of machines, solid control equipment in the nature of centrifuges, wireline cable heads and related equipment in the nature of winches, drill guides for protecting oilfield pipes, metallic liner hangers, metallic float shoes and float collars, metallic stop collars, metallic casing collars, metallic scrapers, metallic toe sleeves, metallic sliding sleeves, metallic vibration tools, metallic wellhead machines in the nature of gate valves, metallic frac stacks in the nature of valves as machine components, metallic fishing tools for locating stray drilling equipment, metallic power drill bits and drill bit cuttersClass 007 for Machines and tools for use in oil and gas exploration, completion, and production, namely, metallic and non-metallic casing centralizers, metallic and non-metallic tubing centralizers, metallic and non-metallic packers, metallic and non-metallic frac balls and frac plugs, metallic and non-metallic power drill bits and drill bit cutters, fluid pumps and separators, drilling rigs and workover rigs in the nature of drilling rigs, torque converters, other than for land vehicles and drag-line excavator tools, friction reduction tools in the nature of pumps for tools, artificial lift systems in the nature of springs being parts of machines, solid control equipment in the nature of centrifuges, wireline cable heads and related equipment in the nature of winches, drill guides for protecting oilfield pipes, metallic liner hangers, metallic float shoes and float collars, metallic stop collars, metallic casing collars, metallic scrapers, metallic toe sleeves, metallic sliding sleeves, metallic vibration tools, metallic wellhead machines in the nature of gate valves, metallic frac stacks in the nature of valves as machine components, metallic fishing tools for locating stray drilling equipment, metallic power drill bits and drill bit cutters
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Apparatus for use in oil and gas exploration, completion, and production, namely, downhole sensors and measuring tools, logging tools, wireline tools; Software for use in petroleum exploration and production, namely, well modeling and projection, torque modeling, drag modeling, friction modeling, drilling measurement, centralizer placement modeling, and hydraulic modeling
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Apparatus for use in oil and gas exploration, completion, and production, namely, downhole sensors and measuring tools, logging tools, wireline tools; Apparatus for use in oil and gas exploration, completion, and production, namely, downhole sensors and tool measuring instruments, logging tools in the nature of electronic data loggers, wireline tools in the nature of extension cables; Software for use in petroleum exploration and production, namely, well modeling and projection, torque modeling, drag modeling, friction modeling, drilling measurement, centralizer placement modeling, and hydraulic modeling; Downloadable computer software for use in petroleum exploration and production, namely, well modeling and projection, torque modeling, drag modeling, friction modeling, drilling measurement, centralizer placement modeling, and hydraulic modelingClass 009 for Apparatus for use in oil and gas exploration, completion, and production, namely, downhole sensors and tool measuring instruments, logging tools in the nature of electronic data loggers, wireline tools in the nature of extension cables; Downloadable computer software for use in petroleum exploration and production, namely, well modeling and projection, torque modeling, drag modeling, friction modeling, drilling measurement, centralizer placement modeling, and hydraulic modeling
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 013 for Explosives for use in oil and gas exploration, completion, and production, namely, shaped charges and perforating tools
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Explosives for use in oil and gas exploration, completion, and production, namely, shaped charges and perforating tools; Explosives for use in oil and gas exploration, completion, and production, namely, perforating tools in the nature of shaped chargesClass 013 for Explosives for use in oil and gas exploration, completion, and production, namely, perforating tools in the nature of shaped charges
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 037 for Installation, maintenance, and repair services relating to oil and gas exploration, completion, and production, namely, slickline services, directional drilling services, safety consulting services, project engineering, wireline services, pipe recovery, logging services, well drilling, torque and test services, fracturing services, pressure control services, cementing services, and technical consulting for same
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Installation, maintenance, and repair services relating to oil and gas exploration, completion, and production, namely, slickline services, directional drilling services, safety consulting services, project engineering, wireline services, pipe recovery, logging services, well drilling, torque and test services, fracturing services, pressure control services, cementing services, and technical consulting for same; Installation, maintenance, and repair services relating to oil and gas exploration, completion, and production apparatus and equipment, namely, apparatus and equipment for slickline services, directional drilling services, safety consulting services, project engineering, wireline services, pipe recovery, logging services, well drilling, torque and test services, fracturing services, pressure control services, and cementing services; Technical consulting related to the installation of oil and gas apparatus and equipmentClass 037 for Installation, maintenance, and repair services relating to oil and gas exploration, completion, and production apparatus and equipment, namely, apparatus and equipment for slickline services, directional drilling services, safety consulting services, project engineering, wireline services, pipe recovery, logging services, well drilling, torque and test services, fracturing services, pressure control services, and cementing services; Technical consulting related to the installation of oil and gas apparatus and equipment
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 040 for Oil and gas production services, namely, project engineering, performation services, well treatment, fluid management, casing and tubing distribution, and technical consulting for same; Petroleum midstream services, namely, processing, treatment, transport, fractionation, compression, and technical consulting for same
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Oil and gas production services, namely, project engineering, performation services, well treatment, fluid management, casing and tubing distribution, and technical consulting for same; Oil and gas production services, namely, perforation services, well treatment, fluid management, casing and tubing distribution, and technical consulting for same; Petroleum midstream services, namely, processing, treatment, transport, fractionation, compression, and technical consulting for same; Petroleum midstream services, namely, processing, treatment, fractionation, compression, and technical consulting for sameClass 040 for Oil and gas production services, namely, perforation services, well treatment, fluid management, casing and tubing distribution, and technical consulting for same; Petroleum midstream services, namely, processing, treatment, fractionation, compression, and technical consulting for same
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 042 for Oil and gas exploration services, namely, measurement and telemetry services, geophysical exploration, computer modeling, and technical consulting for same; engineering services in connection with the custom design, manufacture, and application of specialized downhole tools
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Oil and gas exploration services, namely, measurement and telemetry services, geophysical exploration, computer modeling, and technical consulting for same; Oil and gas exploration services, namely, measurement and downhole telemetry services while drilling, geophysical exploration, computer modeling, and technical consulting for same; engineering services in connection with the custom design, manufacture, and application of specialized downhole toolsClass 042 for Oil and gas exploration services, namely, measurement and downhole telemetry services while drilling, geophysical exploration, computer modeling, and technical consulting for same; engineering services in connection with the custom design, manufacture, and application of specialized downhole tools
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant hereby adds the following class of goods/services to the application:
New: Class 039 (Original Class: 001 ) for Petroleum midstream services, namely, petroleum transport services, and technical consulting, namely, transportation consulting
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

The applicant's current attorney information: Joshua Shamburger. Joshua Shamburger of MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC, is located at

      2000 BERING DRIVE, STE 700
      HOUSTON, Texas 77057
      US
The docket/reference number is Arsenal-002.

The phone number is 713-355-4200.

The email address is jshamburger@matthewsfirm.com

The applicants proposed attorney information: Joshua Shamburger. Joshua Shamburger of MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located at

      2000 BERING DRIVE, STE 700
      HOUSTON, Texas 77057
      United States
The docket/reference number is Arsenal-002.

The phone number is 713-355-4200.

The email address is jshamburger@matthewsfirm.com

Joshua Shamburger submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: JOSHUA SHAMBURGER. JOSHUA SHAMBURGER of MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC, is located at

      2000 BERING DRIVE, STE 700
      HOUSTON, Texas 77057
      US
The docket/reference number is Arsenal-002.

The phone number is 713-355-4200.

The email address is jshamburger@matthewsfirm.com; cnguyen@matthewsfirm.com; sgilbertson@matthewsfirm.com; dkemeny@matthewsfirm.com; tmccutcheon@matthewsfirm.com

The applicants proposed correspondence information: Joshua Shamburger. Joshua Shamburger of MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC, is located at

      2000 BERING DRIVE, STE 700
      HOUSTON, Texas 77057
      United States
The docket/reference number is Arsenal-002.

The phone number is 713-355-4200.

The email address is jshamburger@matthewsfirm.com; cnguyen@matthewsfirm.com; sgilbertson@matthewsfirm.com; tmccutcheon@matthewsfirm.com; dkemeny@matthewsfirm.com

SIGNATURE(S)
Response Signature
Signature: /joshua shamburger/     Date: 08/20/2019
Signatory's Name: Joshua Shamburger
Signatory's Position: Attorney of Record, TX bar member

Signatory's Phone Number: 713-355-4200

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    JOSHUA SHAMBURGER
   MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC
   
   2000 BERING DRIVE, STE 700
   HOUSTON, Texas 77057
Mailing Address:    Joshua Shamburger
   MATTHEWS, LAWSON, MCCUTCHEON & JOSEPH, PLLC
   2000 BERING DRIVE, STE 700
   HOUSTON, Texas 77057
        
Serial Number: 88210131
Internet Transmission Date: Tue Aug 20 18:19:45 EDT 2019
TEAS Stamp: USPTO/ROA-XXX.XXX.XXX.XXX-20190820181945
819007-88210131-6103fe46bbca8b101c353dc7
4814ef6593506bd933de36c51a3cc16ab5711a42
6-N/A-N/A-20190820181534654213