Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88207786 MIDWAY SELECT (Stylized and/or with Design, see http://uspto.report/TM/88207786/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 005 for Topical anesthetic; dental anesthetic for surgical purposes and everyday procedures, lidocaine, articaine, mepivacaine; dental core build-up materials; dental etching gel; hemostatic gel and solution; composites, namely, flowable dental resins; cotton for medical purposes; gauze; orthodontic alginate for dental impressions; vinyl polysiloxane dental impression material; materials used for bite registration; dental tray cleaners; dental tray adhesives; evacuation system disinfectant cleaners; sanitizing surface wipes; disinfectants and cleaner in surface and liquid form; autoclave disinfectant cleaners; dental tartar remover; dental stain remover; dental cement remover; general purpose cleaning solution; plaster and stone remover; enzymatic detergent and tablets; alcohol; solvent; oral rinses, namely, dental rinses; dental pit and fissure sealant; dental paste; dental varnish; dental wax, namely, base plate wax, boxing wax, wax strips, wax ropes; whitening; bonding agents; universal composite; composite - flowable; glass ionomer restorative; cement; intermediate restorative material; desensitizer; curing light; irrigation solutions; eugenol; endo refrigerant spray; gutta percha; alginate; alginate replacement; vinyl polysiloxane putty; fluoride foam; hemostatic solution
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Topical anesthetic; dental anesthetic for surgical purposes and everyday procedures, lidocaine, articaine, mepivacaine; dental anesthetics for surgical purposes, namely, lidocaine, articaine, and mepivacaine; dental core build-up materials; dental etching gel; hemostatic gel and solution; hemostatic gel and solution for dental purposes; composites, namely, flowable dental resins; cotton for medical purposes; gauze; orthodontic alginate for dental impressions; vinyl polysiloxane dental impression material; materials used for bite registration; materials used for dental bite registration; dental tray cleaners; dental tray adhesives; evacuation system disinfectant cleaners; sanitizing surface wipes; disinfectants and cleaner in surface and liquid form; disinfectants and disinfecting cleaner for dental purposes in surface and liquid form; autoclave disinfectant cleaners; dental tartar remover; dental tartar remover, namely, solution to remove tartar from dentures, bridges, orthodontic appliances; dental stain remover; dental stain remover, namely, solution to remove stains from dentures, bridges, orthodontic appliances; dental cement remover; dental cement remover, namely, solution to remove cement from dentures, bridges, inlays, onlays, orthodontic appliances, instruments; general purpose cleaning solution; dental general purpose cleaner, namely, used to remove buffing, other compounds and foreign matter from dentures, bridges, crowns, instruments; plaster and stone remover; plaster and stone remover, namely, solution to remove plaster and stone from dentures, bridges, inlays, onlays, orthodontic appliances, impression trays, spatulas; enzymatic detergent and tablets; enzymatic detergent and tablets for medical purposes; alcohol; alcohol for disinfection or cleaning of instruments; oral rinses, namely, dental rinses for medical purposes; oral rinses, namely, dental rinses; dental pit and fissure sealant; dental polishing paste, namely, prophylaxis paste used to clean and polish teeth; dental paste; dental varnish for use by dentists; dental varnish; dental wax, namely, base plate wax, boxing wax, wax strips, wax ropes; bonding agents for dental purposes; whitening; dental composite materials, namely, universal composite; bonding agents; flowable dental composite; universal composite; materials for tooth restoration, namely, glass ionomer restorative; composite - flowable; dental cement; glass ionomer restorative; materials for tooth restoration, namely, intermediate restorative material; cement; desensitizer, namely, dental material that reduces sensitivity to pain; intermediate restorative material; irrigation solutions for dental use; desensitizer; analgesics, namely, eugenol; curing light; endo refrigerant spray for testing pulp viality; irrigation solutions; alginate, namely, for dental impressions; eugenol; alginate replacement, namely, alginate replacement for dental impressions; endo refrigerant spray; dental impression materials, namely, vinyl polysiloxane and putty; gutta percha; fluoride foam in the nature of anti-cavity coating preparations; alginate; hemostatic solution for medical purposes; alginate replacement; alcohol used as a solvent and dehydrating agent for medical purposes; vinyl polysiloxane putty; solvent; fluoride foam; hemostatic solutionClass 005 for Topical anesthetic; dental anesthetics for surgical purposes, namely, lidocaine, articaine, and mepivacaine; dental core build-up materials; dental etching gel; hemostatic gel and solution for dental purposes; composites, namely, flowable dental resins; cotton for medical purposes; gauze; orthodontic alginate for dental impressions; vinyl polysiloxane dental impression material; materials used for dental bite registration; dental tray cleaners; dental tray adhesives; evacuation system disinfectant cleaners; sanitizing surface wipes; disinfectants and disinfecting cleaner for dental purposes in surface and liquid form; autoclave disinfectant cleaners; dental tartar remover, namely, solution to remove tartar from dentures, bridges, orthodontic appliances; dental stain remover, namely, solution to remove stains from dentures, bridges, orthodontic appliances; dental cement remover, namely, solution to remove cement from dentures, bridges, inlays, onlays, orthodontic appliances, instruments; dental general purpose cleaner, namely, used to remove buffing, other compounds and foreign matter from dentures, bridges, crowns, instruments; plaster and stone remover, namely, solution to remove plaster and stone from dentures, bridges, inlays, onlays, orthodontic appliances, impression trays, spatulas; enzymatic detergent and tablets for medical purposes; alcohol for disinfection or cleaning of instruments; oral rinses, namely, dental rinses for medical purposes; dental pit and fissure sealant; dental polishing paste, namely, prophylaxis paste used to clean and polish teeth; dental varnish for use by dentists; dental wax, namely, base plate wax, boxing wax, wax strips, wax ropes; bonding agents for dental purposes; dental composite materials, namely, universal composite; flowable dental composite; materials for tooth restoration, namely, glass ionomer restorative; dental cement; materials for tooth restoration, namely, intermediate restorative material; desensitizer, namely, dental material that reduces sensitivity to pain; irrigation solutions for dental use; analgesics, namely, eugenol; endo refrigerant spray for testing pulp viality; alginate, namely, for dental impressions; alginate replacement, namely, alginate replacement for dental impressions; dental impression materials, namely, vinyl polysiloxane and putty; fluoride foam in the nature of anti-cavity coating preparations; hemostatic solution for medical purposes; alcohol used as a solvent and dehydrating agent for medical purposes; solvent
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 010 for Needles for medical use; articulating paper; dental burs; pre-bent applicator and dispensing tips; disposable brushes and applicators; mixing pads and wells; dental crowns; dental crowns and bridges provisional material and mixing tips; bibs for dental use; dental tray covers; disposable syringes and tips; disposable filters; evacuator tips; evacuator ejectors; surgical aspirator tips; finishing and polishing points and discs; polishing paste; dental syringes with needle; dental syringes without needle; irrigation needle tips; dental bite registration mixers and tips; bite impression trays; dental utility syringe; digital sensor sleeves; digital barrier envelopes; camera and syringe sleeves; covers for dental t-lights; barrier cover films; barrier curing light sleeves; tray barriers for dental trays; x-ray covers; autoclave pouches; medical gloves, medical masks, eyewear, medical gowns and jackets; mirror defogger; denture and retainer boxes; prophy angles; fluoride trays; sutures; surgical blades; blade handles for surgical blades; disposable scalpels; dental bite rims; medical x-ray aprons and collars; dental bite wing tabs and loops; film holders for x-rays; aspirating syringe; diamonds; bur blocks; mixing pads; mixing wells; bib holders; sponges; disposable traps; evacuation traps; HVE tips; saliva ejectors; endo files; endo gates glidden; barbed broaches; paper points; apex locator; endo aids; bite registration; mixing tips; t-style mixers; intraoral tips; impression trays; disposable barriers; autoclave pouches; waterline tabs; disposable apparel; CSR wrap; dental instruments; mirror heads; mirror handles; dappen dishes; mixing bowls; dispensing gun; posts and drills; retraction cord; sutures; surgical blades; blade handles; disposable bite blocks; film positioners; phosphor imaging plates
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Needles for medical use; articulating paper; dental burs; pre-bent applicator and dispensing tips; pre-bent applicator and dispensing tips attached to a syringe and used for applying dental materials in the mouth; disposable brushes and applicators; disposable brushes and applicators specifically for applying dental materials in the mouth; mixing pads and wells; mixing pads and wells specifically used for preparing dental materials used in the mouth; dental crowns; dental crowns and bridges provisional material and mixing tips; mixing tips for dental materials; bibs for dental use; dental tray covers; dental tray covers for use as a protective germ shield barrier in the health care field; disposable syringes and tips; disposable filters; disposable filters for medical purposes used for filtering water; evacuator tips; evacuator tips for use in dentistry; evacuator ejectors; evacuator ejectors for use in dentistry; surgical aspirator tips; finishing and polishing points and discs; dental equipment, namely, curing lights, handpieces, scalers and polishers; polishing paste; dental finishing and polishing points and discs used to finish dental restorations; dental syringes with needle; dental syringes without needle; irrigation needle tips; dental instruments, namely, irrigation needle tips; dental bite registration mixers and tips; dental instruments, namely, dental bite registration mixers and tips; bite impression trays; dental bite impression trays; dental utility syringe; digital sensor sleeves; digital sensor sleeves for use as a protective germ shield barrier in the health care field for use in connection with digital sensors used for taking digital dental radiographs; digital barrier envelopes; fitted covers for dental patient digital imaging plates, namely, digital barrier envelopes and sleeves; camera and syringe sleeves; dental intra-oral syringe sleeves in the nature of fitted covers for dental syringes; covers for dental t-lights; fitted covers for dental t-lights for use as a protective germ shield barrier in the health care field; barrier cover films; barrier cover films for use as a protective germ shield barrier in the health care field; barrier curing light sleeves; barrier curing light sleeves in the nature of fitted covers for dental curing lights for use as a protective germ shield barrier in the health care field; tray barriers for dental trays; tray barriers for dental trays in the nature of fitted covers for dental trays; x-ray covers; x-ray covers in the nature of fitted covers for patient x-ray machine; autoclave pouches; autoclave pouches in the nature of pouches specifically adapted for holding instruments and other items used in the dental operatory for sterilization for medical use; medical gloves, medical masks, eyewear, medical gowns and jackets; medical gloves; mirror defogger; medical masks; denture and retainer boxes; eyeware; prophy angles; medical gowns and jackets; fluoride trays; mirror defogger, namely, for use in defogging dental mirrors; holders specially adapted for use in connection with dentures and retainers, namely, denture and retainer boxes; dental instruments, namely, prophy angles; medical trays for holding fluoride for use on dental patients; sutures; surgical blades; blade handles for surgical blades; disposable scalpels; film holders for x-rays; dental bite rims; aspirating syringe; medical x-ray aprons and collars; diamonds; dental bite wing tabs and loops; bur blocks; film holders specially adapted for medical x-rays; mixing pads; aspirating syringe for medical use; mixing wells; dental instruments, namely bur blocks for use in connection with dental burs; bib holders; bib holders specifically adapted for use in connection with bibs for dental use; sponges; disposable traps; disposable traps used mainly to protect vacuum system when particles from the intra oral cavity are evacuated; evacuation traps; evacuation traps used mainly to protect vacuum system when particles from the intra oral cavity are evacuated; HVE tips; dental device for extracting saliva from the work area in the mouth, namely HVE tips; saliva ejectors; dental device for extracting saliva from the work area in the mouth, namely, saliva ejectors; endo files; dental instruments, namely, endo files; endo gates glidden; gates glidden drills; barbed broaches; dental instruments for removing pulp tissue during endodontic treatment, namely, barbed broaches; paper points; dental instruments, namely, endodontic paper points for removing moisture from canals; apex locator; endodontic gutta percha for filling canals after pulp removed; endo aids; apex locator, namely, a dental instrument for use in root canal procedures; bite registration; endo aids, namely, surgical instruments for dental use; mixing tips; bite registration, namely, dental bite registration material; t-style mixers; intraoral tips specifically for use in connection with attaching to the end of the mixing tips to extrude dental material intraorally; intraoral tips; dental impression trays; impression trays; disposable barriers for use as a protective germ shield barrier in the health care field; disposable barriers; disposable medical treatment apparel; autoclave pouches; CSR wrap in the nature of sterilization wrap for sterilizing medical instruments; waterline tabs; dental instruments, namely, dental instruments for hygiene, diagnostic, surgery, periodontal, ultrasonic scaling, endodontic, restorative and orthodontic; disposable apparel; dental mirror heads; CSR wrap; dental mirror handles; dental instruments; dental instruments, namely, dappen dishes being vessels for dental purposes; mirror heads; dental mixing bowls specifically adapted for use in connection with mixing dental restoration compounds; mirror handles; medical apparatus, namely, dispensing gun for use in dispensing dental materials; dappen dishes; dental posts and dental drills; mixing bowls; dental instruments, namely, retraction cord; dispensing gun; dental apparatus, namely, disposable bite blocks; posts and drills; dental film positioners; retraction cord; x-ray diagnostic apparatus, namely, phosphor imaging plates and sensors; sutures; dental instruments for removing tartar; surgical blades; dental instruments for removing teeth stains; blade handles; dental instruments for removing dental cement, plaster and stone; disposable bite blocks; dental apparatus, namely, intra-oral curing lights; film positioners; dental instruments, namely, prophy cups; phosphor imaging platesClass 010 for Needles for medical use; articulating paper; dental burs; pre-bent applicator and dispensing tips attached to a syringe and used for applying dental materials in the mouth; disposable brushes and applicators specifically for applying dental materials in the mouth; mixing pads and wells specifically used for preparing dental materials used in the mouth; dental crowns; mixing tips for dental materials; bibs for dental use; dental tray covers for use as a protective germ shield barrier in the health care field; disposable syringes and tips; disposable filters for medical purposes used for filtering water; evacuator tips for use in dentistry; evacuator ejectors for use in dentistry; surgical aspirator tips; dental equipment, namely, curing lights, handpieces, scalers and polishers; dental finishing and polishing points and discs used to finish dental restorations; dental syringes with needle; dental syringes without needle; dental instruments, namely, irrigation needle tips; dental instruments, namely, dental bite registration mixers and tips; dental bite impression trays; dental utility syringe; digital sensor sleeves for use as a protective germ shield barrier in the health care field for use in connection with digital sensors used for taking digital dental radiographs; fitted covers for dental patient digital imaging plates, namely, digital barrier envelopes and sleeves; dental intra-oral syringe sleeves in the nature of fitted covers for dental syringes; fitted covers for dental t-lights for use as a protective germ shield barrier in the health care field; barrier cover films for use as a protective germ shield barrier in the health care field; barrier curing light sleeves in the nature of fitted covers for dental curing lights for use as a protective germ shield barrier in the health care field; tray barriers for dental trays in the nature of fitted covers for dental trays; x-ray covers in the nature of fitted covers for patient x-ray machine; autoclave pouches in the nature of pouches specifically adapted for holding instruments and other items used in the dental operatory for sterilization for medical use; medical gloves; medical masks; eyeware; medical gowns and jackets; mirror defogger, namely, for use in defogging dental mirrors; holders specially adapted for use in connection with dentures and retainers, namely, denture and retainer boxes; dental instruments, namely, prophy angles; medical trays for holding fluoride for use on dental patients; sutures; surgical blades; blade handles for surgical blades; disposable scalpels; dental bite rims; medical x-ray aprons and collars; dental bite wing tabs and loops; film holders specially adapted for medical x-rays; aspirating syringe for medical use; dental instruments, namely bur blocks for use in connection with dental burs; bib holders specifically adapted for use in connection with bibs for dental use; sponges; disposable traps used mainly to protect vacuum system when particles from the intra oral cavity are evacuated; evacuation traps used mainly to protect vacuum system when particles from the intra oral cavity are evacuated; dental device for extracting saliva from the work area in the mouth, namely HVE tips; dental device for extracting saliva from the work area in the mouth, namely, saliva ejectors; dental instruments, namely, endo files; gates glidden drills; dental instruments for removing pulp tissue during endodontic treatment, namely, barbed broaches; dental instruments, namely, endodontic paper points for removing moisture from canals; endodontic gutta percha for filling canals after pulp removed; apex locator, namely, a dental instrument for use in root canal procedures; endo aids, namely, surgical instruments for dental use; bite registration, namely, dental bite registration material; intraoral tips specifically for use in connection with attaching to the end of the mixing tips to extrude dental material intraorally; dental impression trays; disposable barriers for use as a protective germ shield barrier in the health care field; disposable medical treatment apparel; CSR wrap in the nature of sterilization wrap for sterilizing medical instruments; dental instruments, namely, dental instruments for hygiene, diagnostic, surgery, periodontal, ultrasonic scaling, endodontic, restorative and orthodontic; dental mirror heads; dental mirror handles; dental instruments, namely, dappen dishes being vessels for dental purposes; dental mixing bowls specifically adapted for use in connection with mixing dental restoration compounds; medical apparatus, namely, dispensing gun for use in dispensing dental materials; dental posts and dental drills; dental instruments, namely, retraction cord; dental apparatus, namely, disposable bite blocks; dental film positioners; x-ray diagnostic apparatus, namely, phosphor imaging plates and sensors; dental instruments for removing tartar; dental instruments for removing teeth stains; dental instruments for removing dental cement, plaster and stone; dental apparatus, namely, intra-oral curing lights; dental instruments, namely, prophy cups
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 021 for Plastic cups; swabs and sponges for cleaning medical instruments; dental floss; flossing aids, namely, toothpicks and dental floss picks; toothbrushes; drinking cups; prophy cups
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Plastic cups; swabs and sponges for cleaning medical instruments; dental floss; flossing aids, namely, toothpicks and dental floss picks; toothbrushes; drinking cups; prophy cupsClass 021 for Plastic cups; swabs and sponges for cleaning medical instruments; dental floss; flossing aids, namely, toothpicks and dental floss picks; toothbrushes; drinking cups
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant hereby adds the following class of goods/services to the application:
New: Class 003 for oral rinses, namely, non-medicated dental rinses; dental paste in the nature of tooth paste; tooth whitening preparations
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

The applicant's current attorney information: Daniel H. Bliss. Daniel H. Bliss of HOWARD & HOWARD ATTORNEYS PLLC, is located at

      450 WEST FOURTH STREET
      ROYAL OAK, Michigan 48067
      US
The docket/reference number is 112939.00014.

The phone number is 702-257-1483.

The fax number is 702-567-1568.

The email address is ipdocket@h2law.com

The applicants proposed attorney information: Daniel H. Bliss. Other appointed attorneys are Stephanie S. Buntin, Zachary T. Gordon, Samuel J. Haidle, Jeffrey A. Sadowski, Scott M. Levin. Daniel H. Bliss of HOWARD & HOWARD ATTORNEYS PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at

      450 WEST FOURTH STREET
      ROYAL OAK, Michigan 48067
      United States
The docket/reference number is 112939.00014.

The phone number is 702-257-1483.

The fax number is 702-567-1568.

The email address is ipdocket@h2law.com

Daniel H. Bliss submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: DANIEL H. BLISS. DANIEL H. BLISS of HOWARD & HOWARD ATTORNEYS PLLC, is located at

      450 WEST FOURTH STREET
      ROYAL OAK, Michigan 48067
      US
The docket/reference number is 112939.00014.

The phone number is 702-257-1483.

The fax number is 702-567-1568.

The email address is ipdocket@h2law.com; dhb@h2law.com; ag@h2law.com; sl2@h2law.com

The applicants proposed correspondence information: Daniel H. Bliss. Daniel H. Bliss of HOWARD & HOWARD ATTORNEYS PLLC, is located at

      450 WEST FOURTH STREET
      ROYAL OAK, Michigan 48067
      United States
The docket/reference number is 112939.00014.

The phone number is 702-257-1483.

The fax number is 702-567-1568.

The email address is ipdocket@h2law.com; dhb@h2law.com; ag@h2law.com

FEE(S)
Fee(s) in the amount of $275 is being submitted.

SIGNATURE(S)
Declaration Signature

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that, if the applicant submitted the application or allegation of use (AOU) unsigned, all statements in the application or AOU and this submission based on the signatory's own knowledge are true, and all statements in the application or AOU and this submission made on information and belief are believed to be true.

STATEMENTS FOR UNSIGNED SECTION 1(a) APPLICATION/AOU: If the applicant filed an unsigned application under 15 U.S.C. §1051(a) or AOU under 15 U.S.C. §1051(c), the signatory additionally believes that: the applicant is the owner of the mark sought to be registered; the mark is in use in commerce and was in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; the original specimen(s), if applicable, shows the mark in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; for a collective trademark, collective service mark, collective membership mark application, or certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce and was exercising legitimate control over the use of the mark in commerce as of the filing date of the application or AOU; for a certification mark application, the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

STATEMENTS FOR UNSIGNED SECTION 1(b)/SECTION 44 APPLICATION AND FOR SECTION 66(a) COLLECTIVE/CERTIFICATION MARK APPLICATION: If the applicant filed an unsigned application under 15 U.S.C. §§ 1051(b), 1126(d), and/or 1126(e), or filed a collective/certification mark application under 15 U.S.C. §1141f(a), the signatory additionally believes that: for a trademark or service mark application, the applicant is entitled to use the mark in commerce on or in connection with the goods/services specified in the application; the applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; for a collective trademark, collective service mark, collective membership mark, or certification mark application, the applicant has a bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce and had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce as of the application filing date; the signatory is properly authorized to execute the declaration on behalf of the applicant; for a certification mark application, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

Signature: /Daniel H. Bliss/      Date: 09/06/2019
Signatory's Name: Daniel H. Bliss
Signatory's Position: Attorney of Record, Michigan Bar Member
Signatory's Phone Number: 702-257-1483


Response Signature
Signature: /Daniel H. Bliss/     Date: 09/06/2019
Signatory's Name: Attorney of Record, Michigan Bar Member
Signatory's Position: 702-257-1483

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    DANIEL H. BLISS
   HOWARD & HOWARD ATTORNEYS PLLC
   
   450 WEST FOURTH STREET
   ROYAL OAK, Michigan 48067
Mailing Address:    Daniel H. Bliss
   HOWARD & HOWARD ATTORNEYS PLLC
   450 WEST FOURTH STREET
   ROYAL OAK, Michigan 48067
        
RAM Sale Number: 88207786
RAM Accounting Date: 09/06/2019
        
Serial Number: 88207786
Internet Transmission Date: Fri Sep 06 17:23:41 EDT 2019
TEAS Stamp: USPTO/ROA-XX.XXX.XXX.XXX-201909061723413
21731-88207786-610f47a931711f7d866e3936e
5666115bc337e0fb03298344eef2a2af3e0ee18d
f-DA-23405377-20190906170035376638