UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 1/28/2019

 

 

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES:

• Potential Citation of Prior-Filed Application
• Identification Requires Clarification
• Requirements Regarding Multiple Class Applications

 

PRIOR-FILED APPLICATION(S)

 

The trademark examining attorney has searched the USPTO’s database of registered and pending marks and has found no similar registered marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).  However, a mark in a prior-filed pending application may present a bar to registration of applicant’s mark.

 

The filing date of pending U.S. Application Serial No. 86446168 precedes applicant’s filing date.  See attached referenced application.  If the mark in the referenced application registers, applicant’s mark may be refused registration under Trademark Act Section 2(d) because of a likelihood of confusion between the two marks.  See 15 U.S.C. §1052(d); 37 C.F.R. §2.83; TMEP §§1208 et seq.  Therefore, upon receipt of applicant’s response to this Office action, action on this application may be suspended pending final disposition of the earlier-filed referenced application.

 

In response to this Office action, applicant may present arguments in support of registration by addressing the issue of the potential conflict between applicant’s mark and the mark in the referenced application.  Applicant’s election not to submit arguments at this time in no way limits applicant’s right to address this issue later if a refusal under Section 2(d) issues.

 

IDENTIFICATION OF GOODS

 

The wording “..., clutch assemblies and components, ..., flywheels, gaskets, heat shields, input shafts, mounting bolts, pilot bearing assemblies and components, release bearing assemblies and components, release yokes, spacers, and torque brakes,” in Class 12 in the identification of goods is indefinite and must be clarified because it does not identify the goods by the full common commercial name and it encompasses goods classified in more than one class.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01. 

 

Applicant may substitute the following wording, if accurate: 

 

International Class 6

Mounting bolts being bolts of metal.

 

International Class 7

Non-metal engine gaskets for vehicles.

 

International Class 8

Manually operated hand tools for repairing and installing clutches for land vehicles, namely, disc alignment shafts, clutch alignment pins, and shaft removal tools.

 

International Class 9

Measuring instruments for repairing and installing clutches for land vehicles, namely, clutch adjustment gauges and flywheel gauges.

 

International Class 12

Apparatus for power transmission for land vehicles, namely, clutch mechanisms for land vehicles, (identify the clutch components” by the common commercial name, e.g., clutch covers, clutch discs, clutch bearings, clutch pressure plates), bushings, clutch flywheels, (specify the type of gaskets, e.g., transmission pan gaskets), heat shields, transmission input shafts, pilot bearing assemblies being transmission bearings, and (identify the “components” by the common commercial name), release bearing assemblies bearing transmission bearings, and (identify the “components” by the common commercial name), transmission release yokes, transmission spacers, and torque brakes being brakes for land vehicles.

 

Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MULTIPLE-CLASS APPLICATION REQUIREMENTS

 

The application references goods and/or services based on use in commerce in more than one international class; therefore, applicant must satisfy all the requirements below for each international class:

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  Specifically, the application identifies goods and/or services based on use in commerce that are classified in at least five classes; however, applicant submitted a fee(s) sufficient for only three classes.  Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.

 

(3)       Submit verified dates of first use of the mark anywhere and in commerce for each international class.  See more information about verified dates of use.

 

(4)       Submit a specimen for each international class.  The current specimen is acceptable for classes 8, 9 and 12; and applicant needs a specimen for classes 6 and 7.  See more information about specimens.

 

            Examples of specimens for goods include tags, labels, instruction manuals, containers, and photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  

 

 (5)      Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application.”  See more information about verification.

 

See 15 U.S.C. §§1051(a), 1112; 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(1), 2.86(a); TMEP §§904, 1403.01, 1403.02(c).

 

See an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

/John Dwyer/

Examining Attorney

Law Office 116

571-272-9155

John.Dwyer1@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 1/28/2019 FOR U.S. APPLICATION SERIAL NO. 88150070

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 1/28/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.