The mark consists of the term "DAYTON" in white block lettering on a solid red background.
Mark For: DAYTON® trademark registration is intended to cover the categories of metal water tanks, namely, industrial water tanks of metal; metal spray and fuel nozzles for commercial and industrial use and couplings for use with plastic and rubber hoses; kits of metal mating flange members; kits of metal mechanical couplings, namely, metal couplings for use with power transmission equipment; air compressor tanks, namely, containers of metal for compressed air; air compressor accessories, namely, metal couplings used to attach an air tool to a hose or fitting used in a compressed air system; blower supports, namely, metal brackets used with blowers to allow for multiple positioning of the blower; curb caps, namely, metal caps mounted to roof ventilators used as covers; cylinder rod clevis with pins, namely, a metal component used to attach an air cylinder to a work surface; discharge caps, namely, metal caps used with industrial roof fans used for capturing and discharging moisture; drum and barrel pump accessories, namely, metal suction tube used for the discharge of liquids from a drum or barrel; drum cradles, namely, metal brackets used to hold or store metal storage drums for ease of mobility or use; elbow pipe fittings of metal; electric fan bases, namely, metal stands for fans in the nature of pedestals of metal; electric fan trays, namely, metal housings for fans in the nature of metal enclosures for fans; fan mounting hardware, namely, metal brackets used in mounting fans to ceilings or walls; foot switch guards, namely, a metal box enclosing a machine foot switch so as to protect the machine operator`s foot from injury; gas heater vents of metal, namely, metal roof vents for heating in residential and commercial buildings; gear motor accessories, namely, metal brackets used for mounting gear motors in multiple positions; heater brackets, namely, metal brackets used to mount various types of heaters in different types of heating situations; hoist chain containers, namely, metal boxes attached to overhead hoists used to store excess hoist chain so as not to hang down and pose a safety hazard; linear actuator accessories, namely, metal shafts, tubes, screws, brackets and clamps to allow multiple mounting positions of AC and DC motors for machines; metal beam clamps; metal cylinder brackets for air compressors; metal drive mandrels for AC and DC motors for industrial and commercial use; metal flanges; metal roof curbs; metal roof vents for use in heating, ventilation and air conditioning systems for residential and commercial use; metal shaft collars; metal support braces for construction; milling tables, namely, cast iron table and base to support milling machines and accessories therefor, namely, metal clamps, metal studs and metal nuts; motor conversion kits comprised of metal discs that attach to AC and DC motors to allow for multiple mounting types; motor rails, namely, cast iron brackets used for floor mounting of AC and DC motors for machines; motor ring adapters, namely, metal rings used to mount AC and DC motors for machines; non-automatic metal fuel nozzles; quick couplers, namely, hose couplings made of metal used to connect pressure washer hoses to each other or to accessories such as sprayers and guns; stationary and movable metal shutters for fans; steel drums; tube heater accessories, namely, metal air inlet caps for mounting outside at the end of side wall vents; ventilator bird screens, namely, metal screens used to cover ventilation pipes to prevent birds from making nests in the pipes; ventilator hinge kits, namely, metal hinges, cable, nuts and bolts attached to ventilators allowing ventilators to be tilted for easy cleaning and inspection; venturi fan frames, namely, metal frames used for mounting direct drive fans in walls; wall collars for fans, namely, metal collars used to install vertically mounted supply and exhaust fans; hydronic heater guards, namely, metal guards to cover hydronic heaters; light traps for fans, namely, metal devices mounted on roof fans in order to prevent light from entering building structures; steel tubes for use with pumps in the nature of pump suction tubes; metal chains; chain hoist used for lifting and rigging.
Status
2024-05-29 UTC
LIVE REGISTRATION Issued and Active
The trademark application has been registered with the Office.
3 - AN ILLUSTRATION DRAWING WHICH INCLUDES WORD(S)/ LETTER(S) /NUMBER(S)
Mark Type
Trademark
Standard Character Claim
No
Current Location
PUBLICATION AND ISSUE SECTION 2017-10-24
Basis
1(a)
Class Status
ACTIVE
Primary US Classes
002:
Receptacles
012:
Construction Materials
013:
Hardware, Plumbing and Steamfitting Supplies
014:
Metals, Metal Castings and Forgings
023:
Cutlery, Machinery, Tools and Parts Thereof
025:
Locks and Safes
050:
Merchandise Not Otherwise Classified
Primary International Class
006 - Primary Class
(Metal goods) Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; iron mongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Mark R. Galis
Attorney Docket Number
059505.04030
Law Office Assigned
N20
Employee Name
MIRANDA, JOHN SALVADOR
Timeline
1995-02-00
Date of First Use
1995-02-01
Date of First Use
1995-02-01
Date of Use In Commerce
2016-02-23
Application Filed
2017-08-08
Published
2017-08-08
Published for Opposition
2017-10-24
Location: PUBLICATION AND ISSUE SECTION
2017-10-24
Status: Live/Registered
2017-10-24
Status: Registered. The registration date is used to determine when post-registration maintenance documents are due.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.