IC 007. US 013 019 021 023 031 034 035. G & S: Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites being structural parts and specially adapted for engines and motors, in particular housings for engines and motors, not for land vehicles, namely, machine housings, bearing housings, pump housings, valve housings, and oil sumps being parts of vehicle gearboxes other than for land vehicles; steam and oil separators; heat exchangers being parts of machines; pumps being parts of engines and motors; pumps as parts of machines, motors and engines; pumps for cooling engines; pumps for machines; rotary pumps; vacuum pumps; vacuum pumps being machines; oil pumps for land vehicles; oil pumps for use in motors and engines; pumps for heating and cooling systems, namely, pumps for cooling engines, pumps for machines for heating; oil filters, fluid filters, in particular air and gas filters for motors and engines, fans for motors and engines, valves as parts of machines, motors and engines, valves as machine components, valves for pumps, overpressure valves in the nature of pump control valves, thermostatic control valves for machines, temperature-regulated valves for machines, motors and engines, pressure relief valves being parts and specifically adapted for machines, pistons, the aforesaid goods for engines and motors; parts and fittings for all aforesaid goods
IC 009. US 021 023 026 036 038. G & S: Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites as structural parts and specially adapted for measuring and checking apparatus and instruments, in particular housings for printed circuit boards, electric switch housings, electrical connector housings, semiconductor chip housings, electric junction box housings, covers for electric outlets; molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics or plastic composites as structural parts and specially adapted for apparatus and instruments for conducting, switching, converting, storing, controlling and checking electricity, in particular housings for printed circuit boards, electric switch housings, electrical connector housings, semiconductor chip housings, electric junction box housings, covers for electric outlets; molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics or plastic composites as structural parts and specially adapted for apparatus for the recording, transmission and reproduction of sound and picture in particular disc storage containers, covers for electric outlets, holders for compact discs; molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics or plastic composites as structural parts and specially adapted for photovoltaic solar modules and solar modules for production of electricity, in particular holders for photovoltaic solar modules and holders for solar modules for production of electricity
IC 010. US 026 039 044. G & S: Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites, for medical apparatus, instruments and articles, in particular disposable syringes, containers for medical waste, blood containers for medical purposes sold empty, specimen cup holders and mounts for medical x-ray negatives, specially adapted for and being structural parts of medical apparatus, instruments and articles, in particular as parts of blood purification devices in the nature of filters for blood and blood components for medical purposes, dental drills, lithotripters, air filters for medical ventilators, blood filters, X-ray apparatus medical devices, namely, infusion pumps for delivering measured amounts of solutions into the bloodstream over time and vacuum pumps for medical purposes
IC 011. US 013 021 023 031 034. G & S: Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites, in particular water purification tanks, septic tanks, drainage water treatment tanks, waste water treatment tanks, waste water purification apparatus, installations and tanks, containers for medical fluids, hot water tanks being heating apparatus, fluid-bearing parts, in particular water and gas bearing parts, namely, flexible pipes being parts of basin plumbing installations, flexible pipes being parts of sink plumbing installations, flexible pipes being parts of shower plumbing installations, flexible pipes being parts of bath plumbing installations, pipes being parts of sanitary facilities, pipes for heating boilers, all aforesaid goods being structural parts of and specially adapted for air conditioning installations, ventilating installations in the nature of ventilating fans for commercial and industrial use, ventilating exhaust fans, heat sinks for use in heating, cooling and ventilating apparatus, heating installations, lighting installations and waste gas installations; parts and fittings of air conditioning, ventilating, heating, lighting and waste gas installations, in particular thermostatic valves, temperature-regulated valves, heat exchangers not being parts of machines; solar thermal collectors, namely, solar thermal modules for heating purposes
IC 012. US 019 021 023 031 035 044. G & S: Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites as structural parts and specially adapted for vehicles for use on land and as structural parts and specially adapted for motors for vehicles for use on land, in particular gas tanks for land vehicles, mobile storage tanks, trash containers adapted for use in vehicles, gear shift covers, transmission top covers for land vehicles, fuel tank caps for motor cars; crankcases for land vehicle components, other than for engines; sumps being parts of land vehicle gearboxes
IC 017. US 001 005 012 013 035 050. G & S: Flexible tubes of plastics and plastic composites; profiles of plastics or plastic composites, namely, plastic and plastic composite material in the form of profiles, boards, sheets, blocks, rods, powder, and pellets for use in manufacturing; semi-finished plastics and plastic composites in the form of profiles, boards, sheets, blocks, rods, powder, and pellets for use in manufacturing * not for building purposes, except as parts of windows, doors and facades * ; semi-processed foams and films of plastic in the nature of filtering materials for use in oil filters, medical filters, in particular blood filters and fluid filters, in particular air, water and gas filters; electric, thermal and acoustic insulators * for automotive industry and automotive supply industry, medical technology, mechanical engineering, heating and sanitary area, control technology, energy and solar technology * ; heat protection tubes in the nature of rubber tubes and plastic tubes; electric, thermal and acoustic insulation bars, electric, thermal and acoustic insulation profiles, the aforesaid goods being non-metallic and being parts of windows, doors, and facades
IC 019. US 001 012 033 050. G & S: [ Molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics and plastic composites for building purposes in the nature of non-metallic building materials, in particular for ceiling suspensions comprising panels, ducts, not of metal for ventilating and air-conditioning installations, air conditioning ducts, ducts not for electrical circuitry, heating ducts, ventilating ducts and shutter systems primarily comprised of shutters; joists, not of metal, planks, ] ledges, in particular insulation ledges, pipes, in particular media distribution pipes in the nature of branching pipes, gutter pipes, drain pipes, water pipes, rigid pipes for construction purposes, profiles, in particular insulation profiles, couplings, in particular pipe couplings, insulation bars, insulation profiles; all of the aforesaid goods being non-metallic and being parts of windows, doors, and facades
IC 040. US 100 103 106. G & S: Contract manufacturing in the fields of plastics technology, automotive industry, automotive supply industry, medical technology and commercial and residential building industry; plastic processing; plastic working, namely, processing molded parts, molded components and shaped parts, in particular extruded and injected parts, of plastics or plastic composites for others * ; all aforementioned services not in connection with the manufacture of insulating materials for parts of building, except insulation profiles for windows, doors and facades *
IC 042. US 100 101. G & S: Engineering services, technical development and technical consultation, namely, development of new technology for others in the fields of plastics technology, the automotive industry, the automotive supply industry, medical technology, and the building industry, and technical consultation related thereto * ; all aforementioned services not in connection with the manufacture of insulating materials for parts of building, except insulation profiles for windows, doors and facades *
| International Codes: | 7 |
| U.S. Codes: | 013,019,021,023,031,034,035 |
| International Codes: | 9 |
| U.S. Codes: | 021,023,026,036,038 |
| International Codes: | 10 |
| U.S. Codes: | 026,039,044 |
| International Codes: | 11 |
| U.S. Codes: | 013,021,023,031,034 |
| International Codes: | 12 |
| U.S. Codes: | 019,021,023,031,035,044 |
| International Codes: | 17 |
| U.S. Codes: | 001,005,012,013,035,050 |
| International Codes: | 19 |
| U.S. Codes: | 001,012,033,050 |
| International Codes: | 40 |
| U.S. Codes: | 100,103,106 |
| International Codes: | 42 |
| U.S. Codes: | 100,101 |
| Type Code | Type |
|---|
| B00001 | The goods in Class 17, 19, 40, 42 has been corrected according to the Restriction filed 8/10/17 and per the Fnote of 9/13/2017. |
OneLook
Acronym Finder
Joma-Polytec GmbH
Application
| 