BLUESEAL

Cincinnati Test Systems, Inc

Application Filed: 2005-07-07
Trademark Application Details
Trademark Logo BLUESEAL
602
Dead/Abandoned
ABANDONED-FAILURE TO RESPOND OR LATE RESPONSE
Research OneLook Acronym Finder
Serial Number78665229
Mark Drawing Code4000: Illustration: Drawing with word(s)/letter(s)/number(s) in Block form
Law Office AssignedL50
Employee NameBROWN, TINA

Timeline

2005-07-07Application Filed
2005-08-01Date of First Use
2006-08-04Abandon
2006-09-02Location: TMEG LAW OFFICE 105 - EXAMINING ATTORNEY ASSIGNED
2006-09-02Status: Dead/Abandoned
2018-07-08Transaction Date

Trademark Applicants & Owners

Owner: Cincinnati Test Systems, Inc
Address5555 Dry Fork Road Cleves OH 45002
Legal Entity TypeCorporation
Legal Entity StateOH

Documents

Click the blue "Refresh" button to load certificates, specimines, application, and other documents.

Attorney of Record

CINCINNATI TEST SYSTEMS, INC
5555 DRY FORK RD
CLEVES, OH 45002-9733


Good, Services, and Codes

International Codes:7
U.S. Codes:013,019,021,023,031,034,035
Type CodeType
GS0071A coupling device comprises a cylindrical, hollow casing or body to be permanently connected to a conduit for pressurized air; The casing is provided with a follower nut, which is threaded onto the casing and permits the insertion of two interior gaskets and an intermediate, metallic sleeve radially between the inside of the casing and the outside of the end of a pipe section fitted into the casing; Each gasket is of a standard cylindrical dimension and is formed of resilient material such as rubber or a rubber-like composition, whereas the intermediate sleeve is provided with external and internal recesses or shoulders for receiving each of the gaskets and preventing axial displacement of the latter, when the follower nut is screwed onto the casing; Moreover, the radial dimensions of the intermediate sleeve are chosen in view of the difference between the internal diameter of the casing and the external diameter of the pipe section to be coupled thereto; Thus, upon connection, the joint will be air tight; Moreover, standard casings and standard gaskets can be used together with radially different intermediate sleves for connecting pipe sections of different diameters

Trademark Filing History

DescriptionDateEvent Coding
NEW APPLICATION ENTERED IN TRAM2005-07-121 NWAP I:Incoming Correspondence
ASSIGNED TO EXAMINER2006-01-272 DOCK D:Assigned to Examiner
NON-FINAL ACTION WRITTEN2006-02-033 CNRT R:Renewal
NON-FINAL ACTION E-MAILED2006-02-034 GNRT F:First Action
ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE2006-09-025 ABN2 O:Outgoing Correspondence
ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND2006-09-056 MAB2 O:Outgoing Correspondence

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed