Mark For: HELIUM® trademark registration is intended to cover the categories of scanner and software sold as a unit for use in diamond cutting factories, laboratories and dealers for the purpose of scanning diamonds and constructing an accurate three dimensional model of the angle of inclination and the azimuth of the diamond, allowing an accurate visualization and realistic images to be produced that can show small distortions of symmetry with the output usable with various appraisal systems,and creating user defined reports of such information.
Status
2021-07-26 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Law Office Assigned
L70
Employee Name
LEE, DOUGLAS M
Timeline
2004-01-01
Date of First Use
2004-01-01
Date of Use In Commerce
2004-05-05
Application Filed
2005-10-25
Published
2005-10-25
Published for Opposition
2006-01-17
Location: PUBLICATION AND ISSUE SECTION
2006-01-17
Trademark Registered
2012-10-12
Cancelled
2012-10-12
Status: Dead/Cancelled
2012-10-12
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Sivovolenko, Serguei Borisovish Sedova Street 13 Building 2, Room 216, 1 Moscow 129323 Russia
Good, Services, and Codes
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
GS0091
Scanner and software sold as a unit for use in diamond cutting factories, laboratories and dealers for the purpose of scanning diamonds and constructing an accurate three dimensional model of the angle of inclination and the azimuth of the diamond, allowing an accurate visualization and realistic images to be produced that can show small distortions of symmetry with the output usable with various appraisal systems,and creating user defined reports of such information
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Sivovolenko, Serguei Borisovish
Application
Drawing
| 