UNITED STATES PATENT AND TRADEMARK OFFICE
|
SERIAL NO: 78/243627
APPLICANT: Representaciones Artisticas Apodaca, S.A ETC.
|
|
|
CORRESPONDENT ADDRESS: Jesus Sanchelima, Esq. Sanchelima & Associates, P.A. 235 S.W. Le Jeune Road Miami, FL 33134-1762
|
RETURN ADDRESS: Commissioner for Trademarks 2900 Crystal Drive Arlington, VA 22202-3514
|
|
MARK: BRONCO
|
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: 22961
CORRESPONDENT EMAIL ADDRESS:
|
Please provide in all correspondence:
1. Filing date, serial number, mark and applicant's name. 2. Date of this Office Action. 3. Examining Attorney's name and Law Office number. 4. Your telephone number and e-mail address.
|
Serial Number 78/243627
The assigned examining attorney has reviewed the referenced application and the applicant’s response dated February 9, 2004 and determined the following.
The applicant has successfully divided the application and the translation of the specimens are acceptable as submitted.
The drawing is unacceptable because it exceeds four inches by four inches. The requirements for a special‑form drawing are as follows:
(1) The drawing must appear in black and white; no color is permitted.
(2) Every line and letter must be black and clear.
(3) The use of gray to indicate shading is unacceptable.
(4) The lining must not be too fine or too close together.
(5) The preferred size of the area in which the mark is displayed is 2½ inches (6.1 cm.) high and 2½ inches (6.1 cm.) wide. It should not be larger than 4 inches (10.3 cm.) high or 4 inches (10.3 cm.) wide.
(6) If the reduction of the mark to the required size renders any details illegible, the applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §2.52; TMEP §§807.01(b) and 807.07(a). The Office will enforce these drawing requirements strictly.
The Office prefers that the drawing be depicted on a separate sheet of smooth, nonshiny, white paper 8 to 8½ inches (20.3 to 21.6 cm.) wide and 11 inches (27.9 cm.) long, and that the sheet contain a heading listing, on separate lines, the applicant’s complete name; the applicant’s address; the goods or services recited in the application; and, if the application is filed under Section 1(a) of the Act, the dates of first use of the mark and of first use of the mark in commerce; or, if the application is filed under Section 44(d), the priority filing date of the foreign application. 37 C.F.R. §2.52(b); TMEP §§807.01(a), 807.01(b), 807.01(c) and 807.07(a).
NOTE: The Trademark Rules pertaining to drawings were amended on November 2, 2003. For applications filed prior to November 2, 2003, applicants may follow either the new special form drawing rules or the special form drawing rules in force prior to their amendment on November 2, 2003. Exam Guide 01-03, section I.B.6.
The new requirements for a special-form drawing are as follows:
· The drawing must appear in black and white if color is not claimed as a feature of the mark, or in color if color is claimed as a feature of the mark.
· Drawings must be typed or made with a pen or by a process that will provide high definition when copied. A photolithographic, printer’s proof copy, or other high quality reproduction of the mark may be used. All lines must be clean, sharp and solid, and must not be fine or crowded.
· The image must be no larger than 3.15 inches (8 cm) high by 3.15 inches (8cm) wide.
· If reduction of the mark to the required size renders any details illegible, then applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §§2.52(b); See TMEP §§807.01(b) and 807.07(a).
If submitted on paper, the Office prefers that the drawing be depicted on a separate sheet of non-shiny, white paper that is 8 to 8.5 inches wide and 11 to 11.69 inches long (20.3 to 21.6 cm. wide and 27.9 to 29.7 cm. long). One of the shorter sides of the sheet should be regarded as its top edge. In addition, the drawing should include the caption “DRAWING PAGE” at the top of the drawing beginning one-inch (2.5 cm) from the top edge. 37 C.F.R. §2.54.
The Office strictly enforces these drawing requirements.
To submit a special form drawing electronically, applicant must attach a digitized image of the mark to the submission. The Office will only accept an image in .jpg format. The image must be formatted at no less than 300 dots per inch and no more than 350 dots per inch; and with a length and width of no less than 250 pixels and no more than 944 pixels. All lines in the image must be clean, sharp and solid, and not fine or crowded, and produce a high quality image when copied. 37 C.F.R. §2.53.
If the applicant has any questions or needs assistance in responding to this Office action, please telephone the assigned examining attorney.
/Giancarlo Castro/
Examining Attorney
Law Office 110
703-308-9110(ext. 290)
How to respond to this Office Action:
To respond formally using the Office’s Trademark Electronic Application System (TEAS), visit http://www.gov.uspto.report/teas/index.html and follow the instructions.
To respond formally via regular mail, your response should be sent to the mailing Return Address listed above and include the serial number, law office and examining attorney’s name on the upper right corner of each page of your response.
FOR INQUIRIES OR QUESTIONS ABOUT THIS OFFICE ACTION, PLEASE CONTACT THE ASSIGNED EXAMINING ATTORNEY.