Mark For: DIEHARD™ trademark registration is intended to cover the categories of non-metallic hose and pipe, textile reinforced synthetic rubber hose and pipe, and metallic reinforced synthetic rubber hose and pipe, all of the foregoing hose and pipe having a maximum rated working pressure of not less than 300 pounds per square inch and being for hydraulic and pneumatic applications in machinery, motors, engines, industrial equipment and vehicles, marine equipment and ships, agricultural equipment and vehicles, and mining and earth moving equipment and vehicles.
Status
2022-06-04 UTC
DEAD APPLICATION Refused Dismissed or Invalidated
This trademark application was refused, dismissed, or invalidated by the Office and this application is no longer active.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
OLIFF & BERRIDGE, PLC
Attorney Name
James A. Oliff
Attorney Docket Number
119226
Law Office Assigned
M50
Employee Name
STRASER, RICHARD A
Timeline
2004-03-23
Application Filed
2005-09-13
Published
2005-09-13
Published for Opposition
2006-10-05
Abandon
2006-10-05
Location: TTAB
2006-10-05
Status: Abandoned after an inter partes decision by the Trademark Trial and Appeal Board. For further information, see TTABVUE on the Tr
JAMES A. OLIFF OLIFF & BERRIDGE, PLC P.O. BOX 19928 ALEXANDRIA, VA 22320
Good, Services, and Codes
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
non-metallic hose and pipe, textile reinforced synthetic rubber hose and pipe, and metallic reinforced synthetic rubber hose and pipe, all of the foregoing hose and pipe having a maximum rated working pressure of not less than 300 pounds per square inch and being for hydraulic and pneumatic applications in machinery, motors, engines, industrial equipment and vehicles, marine equipment and ships, agricultural equipment and vehicles, and mining and earth moving equipment and vehicles
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.