Mark For: BCA® trademark registration is intended to cover the categories of ball bearings for use in engines, motors and machinery; clutch release ball bearings of the listed several types, namely angular contact type; thrust ball bearing-one direction-flat seat; thrust ball bearing-one direction-self- aligning; transmission line ball bearing units of the types, namely pillow blocks; flange units; ball bearing retainers of the types, namely star all retainer; magneto ball retainer; thrust ball retainer, radial ball bearings of the listed different types, namely, single row ball bearings-conrad type; single row ball bearings-maximum type; single row ball bearings with shield; single row ball bearings with snap ring; single row ball bearings-with wide inner ring; single row ball bearings-with seals; single row ball bearings-with wide inner ring and single labyrinth seal; single row ball bearings-with extended inner ring and set screw type; single row-angular contact-ball bearings; double row ball bearings, all being for machines.
Status
2021-07-25 UTC
LIVE REGISTRATION Issued and Active
The trademark application has been registered with the Office.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Grace Han Stanton Perkins Coie LLP 1201 Third Avenue, Suite 4900 Seattle WA 98101
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
Ball bearings for use in engines, motors and machinery; clutch release ball bearings of the listed several types, namely angular contact type; thrust ball bearing-one direction-flat seat; thrust ball bearing-one direction-self- aligning; transmission line ball bearing units of the types, namely pillow blocks; flange units; ball bearing retainers of the types, namely star all retainer; magneto ball retainer; thrust ball retainer, radial ball bearings of the listed different types, namely, single row ball bearings-conrad type; single row ball bearings-maximum type; single row ball bearings with shield; single row ball bearings with snap ring; single row ball bearings-with wide inner ring; single row ball bearings-with seals; single row ball bearings-with wide inner ring and single labyrinth seal; single row ball bearings-with extended inner ring and set screw type; single row-angular contact-ball bearings; double row ball bearings, all being for machines
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.