Mark For: ONESTEP® trademark registration is intended to cover the categories of computer software used for design-for-manufacture and formability engineering, for cost estimation of sheet metal parts, to design forming processes and to create product geometries and die geometries in the fields of forming technology and geometry modeling and database software for the acquisition and classification of design data, material data and manufacturing data. [all]
Status
2022-07-05 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Bassam N. Ibrahim
Attorney Name
Bassam N. Ibrahim
Attorney Docket Number
009765-00004
Law Office Assigned
M40
Employee Name
WAHLBERG, STACY B
Timeline
2002-11-20
Application Filed
2004-04-20
Published
2004-04-20
Published for Opposition
2004-07-13
Trademark Registered
2010-07-27
Location: TMO LAW OFFICE 113
2015-02-20
Cancelled
2015-02-20
Status: Dead/Cancelled
2015-02-20
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Bassam N. Ibrahim Buchanan Ingersoll & Rooney, P.C. POST OFFICE BOX 1404 ALEXANDRIA VA 22313-1404
Good, Services, and Codes
(CANCELLED) IC 009. US 021 023 026 036 038. G & S: COMPUTER SOFTWARE USED FOR DESIGN-FOR-MANUFACTURE AND FORMABILITY ENGINEERING, FOR COST ESTIMATION OF SHEET METAL PARTS, TO DESIGN FORMING PROCESSES AND TO CREATE PRODUCT GEOMETRIES AND DIE GEOMETRIES IN THE FIELDS OF FORMING TECHNOLOGY AND GEOMETRY MODELING AND DATABASE SOFTWARE FOR THE ACQUISITION AND CLASSIFICATION OF DESIGN DATA, MATERIAL DATA AND MANUFACTURING DATA
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
GS0091
COMPUTER SOFTWARE USED FOR DESIGN-FOR-MANUFACTURE AND FORMABILITY ENGINEERING, FOR COST ESTIMATION OF SHEET METAL PARTS, TO DESIGN FORMING PROCESSES AND TO CREATE PRODUCT GEOMETRIES AND DIE GEOMETRIES IN THE FIELDS OF FORMING TECHNOLOGY AND GEOMETRY MODELING AND DATABASE SOFTWARE FOR THE ACQUISITION AND CLASSIFICATION OF DESIGN DATA, MATERIAL DATA AND MANUFACTURING DATA
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (10-YR)/EXPIRED SECTION 9
2015-02-20
REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
AutoForm Engineering GmbH
Application
Registration Certificate
| 