Mark For: BLOCKER® trademark registration is intended to cover the categories of sleeves of molded polyurethane for protecting controllers for traffic data collection devices; plastic conduit for protecting controllers for traffic data collection devices. [all]
Status
2022-07-22 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Attorney Name
Kimberly A. Chasteen
Attorney Docket Number
029914.0002
Law Office Assigned
M20
Employee Name
LORENZO, ROBERT
Timeline
1998-12-00
Date of First Use
1998-12-01
Date of First Use
1999-09-01
Date of Use In Commerce
2002-06-06
Application Filed
2003-04-22
Published
2003-04-22
Published for Opposition
2003-07-15
Trademark Registered
2009-02-18
Location: SCANNING ON DEMAND
2010-02-20
Cancelled
2010-02-20
Status: Dead/Cancelled
2010-02-20
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Kimberly A. Chasteen Williams Mullen 721 Lakefront Commons, Suite 200 Newport News VA 23606
Good, Services, and Codes
(CANCELLED) IC 017. US 001 005 012 013 035 050. G & S: Sleeves of molded polyurethane for protecting controllers for traffic data collection devices; plastic conduit for protecting controllers for traffic data collection devices. FIRST USE: 19981200. FIRST USE IN COMMERCE: 19990900
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
Sleeves of molded polyurethane for protecting controllers for traffic data collection devices; plastic conduit for protecting controllers for traffic data collection devices
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.